Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB16RED red 2:1 heat shrink tubing with a 1.6 mm supplied internal diameter, 0.8 mm nominal recovered diameter and 17 m pack length, designed for fine wire insulation, electrical protection and cable identification.
£13.90
The Partex HSMB16RED is a versatile red 2:1 heat shrink tubing designed for electrical insulation, wire identification and protective sleeving in industrial, commercial and general electrical installations. Supplied in a convenient 17 m pack, this small-diameter tubing provides a practical solution for protecting fine electrical wires, small connections and wiring assemblies.
Featuring a nominal supplied internal diameter of 1.6 mm and a nominal recovered internal diameter of 0.8 mm, the tubing contracts when suitable heat is applied to form a close-fitting protective sleeve around compatible conductors and components. Its 2:1 shrink ratio allows the diameter to reduce to approximately half its original size, making it particularly suitable for precision wiring, cable protection and small conductor identification applications.
The distinctive red colour supports visual wire identification and organised cable management. As part of the Partex HSMB heat shrink tubing range, the HSMB16RED is suitable for electrical contractors, electronics technicians, panel builders and maintenance engineers requiring reliable protective sleeving for professional wiring applications.
Small-diameter heat shrink tubing provides a convenient method of insulating, identifying and protecting fine electrical conductors. When suitable heat is applied, the tubing contracts around the underlying wire or component, forming a close-fitting sleeve that helps reduce exposure to abrasion and general mechanical wear.
The Partex HSMB16RED is particularly useful for wiring applications requiring a small initial opening. Its 1.6 mm nominal supplied diameter accommodates suitably sized fine wires, while the 2:1 shrink ratio allows the tubing to recover towards a nominal internal diameter of 0.8 mm. This makes it a practical choice for compatible small electrical connections and precision wiring assemblies.
The red finish provides an additional visual identification method for organised electrical installations. Red sleeving can be used for circuit grouping, polarity identification or other designated wiring functions where appropriate. Conductor identification should always follow the applicable electrical standards and the specific requirements of the installation.
Tick the specs you need, then view products that match.
| Supply Format | 17 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 0.8–1.6 mm | |
| Internal Diameter Before Shrinking (mm) | 1.6 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Red | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | HSMB Heat Shrink Tubing | |
| Model / Part number | HSMB16RED | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 1.6 mm | |
| Nominal recovered internal diameter | 0.8 mm | |
| Colour | Red | |
| Pack length | 17 m | |
| Installation method | Heat shrinking | |
| Primary functions | Electrical insulation, wire identification and mechanical protection | |
| Typical applications | Fine wire insulation, electronics wiring, control panels and cable assemblies | |
| HS Code | 39269097 |
The Partex HSMB16RED is used for electrical insulation, fine wire protection and identification in electronics wiring, control panels, cable assemblies and electrical maintenance applications.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when correctly heated under suitable conditions.
The tubing has a nominal supplied internal diameter of 1.6 mm and a nominal recovered internal diameter of 0.8 mm.
The Partex HSMB16RED is supplied in a 17 m pack and can be cut to the required length for individual wire protection and identification applications.
Yes. The red colour supports visual conductor identification, circuit grouping and colour-coded wiring systems. It may also be used for positive DC conductor identification where the applicable wiring conventions permit, but it should not be assumed to identify a particular conductor function without checking the relevant electrical standards.
Partex cable identification and protection products support professional electrical installations and organised wiring systems. The HSMB16RED 2:1 heat shrink tubing combines a compact 1.6 mm nominal supplied diameter, distinctive red identification colour and convenient 17 m pack length for fine wire insulation, electrical protection and cable management applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.