Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB16BLUE blue 2:1 heat shrink tubing with a 1.6 mm supplied internal diameter, 0.8 mm nominal recovered internal diameter and 17 m pack quantity, designed for electrical insulation, fine wire protection and colour-coded cable identification.
£13.90
The Partex HSMB16BLUE is a small-diameter blue heat shrink tubing designed for electrical insulation, fine wire protection, conductor identification and professional cable management. Featuring a 2:1 shrink ratio, this tubing reduces from a nominal supplied internal diameter of 1.6 mm to 0.8 mm when fully recovered, providing a close-fitting protective sleeve around appropriately sized small wires, conductors and electrical components.
Manufactured by Partex, a specialist in cable identification and electrical installation products, the HSMB16BLUE offers a practical solution for precision wiring applications. Its distinctive blue finish supports organised cable identification and can be particularly useful in installations where blue is specified for neutral conductor identification under applicable UK and European harmonised wiring conventions.
Supplied in a convenient 17 m pack, the Partex HSMB16BLUE is suitable for electrical contractors, electronics technicians, control panel builders, industrial manufacturers and maintenance engineers. With its compact 1.6 mm supplied internal diameter and 0.8 mm nominal recovered internal diameter, it is particularly useful for fine wires, compact electrical connections and small-diameter protective sleeving applications.
The combination of a 2:1 shrink ratio, small tubing diameter and blue colour makes the HSMB16BLUE a practical choice for electrical and electronic assemblies requiring both protective insulation and a clear visual identification system.
Heat shrink tubing is widely used in electrical and electronic installations to provide protective sleeving around conductors, wire connections and electrical components. When suitable heat is applied, the tubing contracts around the underlying component, creating a close-fitting covering that can help protect against abrasion and provide additional electrical insulation where the product is appropriately specified.
The Partex HSMB16BLUE combines a practical 2:1 shrink ratio with a compact 1.6 mm supplied internal diameter. This makes it particularly useful for applications involving fine electrical conductors, small wiring assemblies and components where larger heat shrink tubing would be unsuitable. Once heated, the tubing contracts towards its nominal recovered internal diameter of 0.8 mm.
The small diameter allows installers to apply protective sleeving to individual fine wires while maintaining a tidy and compact wiring arrangement. This can be especially beneficial in electronic equipment, instrumentation systems, industrial control panels and electrical assemblies where space is limited and careful wire management is important.
The blue colour provides an additional identification benefit. In UK and European harmonised electrical wiring systems, blue is commonly used to identify neutral conductors. Blue heat shrink tubing can therefore support appropriate conductor identification when installed in accordance with the applicable electrical standards and the requirements of the specific installation.
For equipment wiring, instrumentation and other specialist systems, blue sleeving may also be used as part of a documented cable identification scheme. However, it should not be applied in a way that incorrectly identifies the electrical function of a conductor. Where blue denotes neutral, avoid using it to identify line, protective earth or mixed-function conductor groups.
For effective installation, select tubing with a supplied internal diameter large enough to pass over the intended wire, connector or component and a recovered diameter suitable for achieving the required fit. Cut the tubing to the required length and position it over the area requiring protection.
Apply controlled, even heat using an appropriate heat gun, following the manufacturer's installation recommendations. Particular care should be taken when heating fine wires and small electronic components to avoid damaging delicate insulation or nearby equipment.
Where waterproofing, adhesive bonding or a specified environmental seal is required, select a product with the relevant verified properties. The HSMB16BLUE should not be assumed to provide adhesive sealing or a particular waterproof rating without confirmation from the manufacturer's technical documentation.
Tick the specs you need, then view products that match.
| Supply Format | 17 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 0.8–1.6 mm | |
| Internal Diameter Before Shrinking (mm) | 1.6 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Blue | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / Part number | HSMB16BLUE | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Supplied internal diameter | 1.6 mm | |
| Nominal recovered internal diameter | 0.8 mm | |
| Colour | Blue | |
| Pack quantity | 17 m | |
| Installation method | Heat shrinking | |
| Primary function | Electrical insulation, fine wire protection and cable identification | |
| Typical applications | Fine electrical wires, electronic equipment, instrumentation and compact cable assemblies | |
| HS Code | 39269097 |
The Partex HSMB16BLUE is used for electrical insulation, fine wire protection and cable identification. Its small supplied diameter makes it particularly suitable for appropriately sized fine wires, compact electrical connections, electronic equipment and instrumentation wiring.
The tubing has a 2:1 shrink ratio, with a nominal supplied internal diameter of 1.6 mm and a nominal recovered internal diameter of 0.8 mm when fully shrunk under suitable heating conditions.
The HSMB16BLUE is supplied in a 17 m pack, providing a practical quantity of small-diameter blue heat shrink tubing for electrical contractors, electronics technicians, industrial manufacturers and maintenance professionals.
Yes. Blue heat shrink tubing can be used for neutral conductor identification where this is appropriate under the applicable electrical wiring standards. Blue is the recognised neutral identification colour in UK and European harmonised wiring systems. The sleeving should only be used for this purpose when it accurately identifies the conductor's function and complies with the installation requirements.
Cut the tubing to the required length, position it over a suitably sized wire or electrical component and apply controlled, even heat using an appropriate heat gun. The tubing contracts around the component to provide a close-fitting blue protective sleeve. Follow the manufacturer's installation instructions, avoid overheating delicate wires and ensure electrical circuits are safely isolated before working on them.
Partex cable identification and electrical installation products are used by electrical engineers, electronics technicians, control panel builders and industrial maintenance professionals. The HSMB16BLUE small-diameter blue heat shrink tubing provides a practical solution for fine wire protection, electrical insulation and colour-coded cable identification in electronic, industrial and commercial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.