Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB16BLACK black 2:1 heat shrink tubing with a 1.6 mm supplied internal diameter, 0.8 mm nominal recovered internal diameter and 17 m pack quantity, designed for electrical insulation, fine wire protection and professional cable management.
£13.90
The Partex HSMB16BLACK is a small-diameter black heat shrink tubing designed for electrical insulation, wire protection, cable identification and professional cable management. Featuring a 2:1 shrink ratio, this tubing reduces from a nominal supplied internal diameter of 1.6 mm to 0.8 mm when fully recovered, providing a close-fitting protective sleeve around appropriately sized small wires, conductors and electrical components.
Manufactured by Partex, a specialist in cable identification and electrical installation products, the HSMB16BLACK offers a practical solution for applications requiring precision heat shrink sleeving. Its black finish provides a neat, consistent appearance, making it suitable for electronic wiring, control panels, instrumentation, small cable assemblies and electrical maintenance applications.
Supplied in a convenient 17 m pack, the Partex HSMB16BLACK is suitable for electrical contractors, electronics technicians, control panel builders, industrial manufacturers and maintenance engineers. With its 1.6 mm supplied internal diameter and 0.8 mm nominal recovered internal diameter, it is particularly useful for fine wires, compact electrical connections and small-diameter protective sleeving applications.
Heat shrink tubing is widely used in electrical and electronic installations to provide protective sleeving around conductors, wire connections and electrical components. When suitable heat is applied, the tubing contracts around the underlying component, creating a close-fitting covering that can help protect against abrasion and provide additional electrical insulation where the product is appropriately specified.
The Partex HSMB16BLACK combines a practical 2:1 shrink ratio with a compact 1.6 mm supplied internal diameter. This makes it particularly useful for applications involving fine electrical conductors, small wiring assemblies and components where larger heat shrink tubing would be unsuitable. Once heated, the tubing contracts towards its nominal recovered internal diameter of 0.8 mm.
The small diameter allows installers to apply protective sleeving to individual fine wires while maintaining a tidy and compact wiring arrangement. This can be especially beneficial in electronic equipment, instrumentation systems, industrial control panels and electrical assemblies where space is limited and careful wire management is important.
Black heat shrink tubing is commonly selected for general-purpose protective sleeving and electrical wire insulation. Its understated appearance helps create a consistent finish across cable assemblies while reducing direct exposure of the underlying wire insulation to minor mechanical wear.
Where conductor identification is required, suitable cable markers, labels or other identification products should be used in accordance with the relevant electrical standards. Black sleeving should not be applied in a way that incorrectly identifies the function of a conductor, particularly in installations using harmonised wiring colours.
For effective installation, select tubing with a supplied internal diameter large enough to pass over the intended wire, connector or component and a recovered diameter suitable for achieving the required fit. Cut the tubing to the required length and position it over the area requiring protection.
Apply controlled, even heat using an appropriate heat gun, following the manufacturer's installation recommendations. Particular care should be taken when heating fine wires and small electronic components to avoid damaging delicate insulation or nearby equipment. Where waterproofing, adhesive bonding or a specified environmental seal is required, select a product with the relevant verified properties rather than assuming standard heat shrink tubing provides a sealed connection.
Tick the specs you need, then view products that match.
| Supply Format | 17 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 0.8–1.6 mm | |
| Internal Diameter Before Shrinking (mm) | 1.6 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Black | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / Part number | HSMB16BLACK | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Supplied internal diameter | 1.6 mm | |
| Nominal recovered internal diameter | 0.8 mm | |
| Colour | Black | |
| Pack quantity | 17 m | |
| Installation method | Heat shrinking | |
| Primary function | Electrical insulation, wire protection and cable management | |
| Typical applications | Fine electrical wires, electronic equipment, instrumentation and compact cable assemblies | |
| HS Code | 39269097 |
The Partex HSMB16BLACK is used for electrical insulation, fine wire protection and cable management. Its small supplied diameter makes it particularly suitable for appropriately sized fine wires, compact electrical connections, electronic equipment and instrumentation wiring.
The tubing has a 2:1 shrink ratio, with a nominal supplied internal diameter of 1.6 mm and a nominal recovered internal diameter of 0.8 mm when fully shrunk under suitable heating conditions.
The HSMB16BLACK is supplied in a 17 m pack, providing a practical quantity of small-diameter black heat shrink tubing for electrical contractors, electronics technicians, industrial manufacturers and maintenance professionals.
Yes. The 1.6 mm supplied internal diameter makes the tubing suitable for appropriately sized fine wires and small conductors. When heated, it contracts towards a nominal recovered internal diameter of 0.8 mm. The wire or component should be measured before installation to ensure that the tubing can pass over it and recover sufficiently to achieve the required fit.
Cut the tubing to the required length, position it over a suitably sized wire or electrical component and apply controlled, even heat using an appropriate heat gun. The tubing contracts around the component to provide a close-fitting black protective sleeve. Follow the manufacturer's installation instructions, avoid overheating delicate wires and ensure electrical circuits are safely isolated before working on them.
Partex cable identification and electrical installation products are used by electrical engineers, electronics technicians, control panel builders and industrial maintenance professionals. The HSMB16BLACK small-diameter black heat shrink tubing provides a practical solution for fine wire protection, electrical insulation and professional cable management in electronic, industrial and commercial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.