Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB12WHITE is white 2:1 heat shrink tubing with a 1.2 mm supplied diameter, 0.6 mm recovered diameter and 20 m pack length, designed for electrical insulation, fine-wire protection and miniature conductor sleeving.
£13.90
The Partex HSMB12WHITE is a compact 2:1 heat shrink tubing designed for electrical insulation, fine-wire protection and conductor sleeving in industrial, commercial and general electrical applications. Featuring a clean white finish, this tubing has a nominal supplied diameter of 1.2 mm and a nominal recovered diameter of 0.6 mm, making it particularly suitable for appropriately sized miniature electrical wires, fine conductors and compact wiring assemblies.
As part of the Partex heat shrink tubing range, the HSMB12WHITE provides a practical solution for insulating and protecting small-diameter electrical wiring. When suitable heat is applied, the tubing contracts around the underlying conductor or component, forming a close-fitting protective sleeve. Its 2:1 shrink ratio provides installation flexibility, while the white colour supports neat cable organisation and visual identification within appropriately designed wiring systems.
Supplied in a convenient 20 m pack, the Partex HSMB12WHITE is suitable for electrical panel builders, electronics technicians, cable harness manufacturers and maintenance engineers. Its 1.2/0.6 mm diameter specification makes it particularly useful for precision sleeving applications where compact dimensions, protective insulation and organised wiring are important.
The Partex HSMB12WHITE provides a convenient method of applying protective heat shrink tubing to miniature electrical conductors and compact wiring assemblies. The tubing is positioned over the required section of wire before suitable heat is applied. As it contracts, the tubing conforms to the underlying conductor insulation or component, creating a close-fitting protective covering.
With a 1.2 mm supplied diameter and a 0.6 mm nominal recovered diameter, the HSMB12WHITE is particularly suited to applications involving fine electrical wires where larger heat shrink tubing would be unsuitable. Its 2:1 shrink ratio allows the tubing to accommodate compatible conductor dimensions while providing a neat and compact finished sleeve.
The white finish supports visual differentiation of wiring within appropriately designed cable identification systems. For effective installation, select tubing with a supplied diameter large enough to pass over the wire or component and a recovered diameter small enough to provide a secure fit. Apply heat evenly using suitable equipment, follow the manufacturer's installation instructions and confirm that the tubing meets the electrical and environmental requirements of the application.
Tick the specs you need, then view products that match.
| Supply Format | 20 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 0.6–1.2 mm | |
| Internal Diameter Before Shrinking (mm) | 1.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | White | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model | HSMB12WHITE | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 1.2 mm | |
| Nominal recovered diameter | 0.6 mm | |
| Colour | White | |
| Pack length | 20 m | |
| Activation method | Application of suitable heat | |
| Installation method | Heat-shrinkable conductor sleeving | |
| Application | Electrical insulation, fine-wire protection, miniature conductor sleeving and wiring organisation | |
| HS Code | 39269097 |
The Partex HSMB12WHITE is designed for electrical insulation, fine-wire protection and protective sleeving on compatible miniature electrical conductors and compact wiring assemblies.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original nominal diameter when fully recovered under suitable heating conditions.
The HSMB12WHITE has a nominal supplied diameter of 1.2 mm and a nominal recovered diameter of 0.6 mm.
The tubing is supplied in white, providing a clean appearance and supporting visual wire identification within appropriately designed electrical wiring systems.
Each pack contains 20 m of Partex white 2:1 heat shrink tubing, suitable for multiple fine-wire insulation and protective sleeving tasks.
Yes. With a nominal supplied diameter of 1.2 mm and a nominal recovered diameter of 0.6 mm, the tubing is suitable for appropriately sized miniature electrical wires and fine conductors.
Yes. The HSMB12WHITE can be used for compatible fine-wire sleeving, conductor insulation and wiring organisation within electrical control panels, provided the tubing meets the relevant installation requirements.
Yes. The tubing can be cut to the required length before heating, allowing individual protective sleeves to be prepared for specific wires, conductors and electrical components.
Choose tubing with a supplied diameter large enough to pass over the wire or component before heating and a recovered diameter small enough to provide a close fit. For the HSMB12WHITE, the nominal supplied and recovered diameters are 1.2 mm and 0.6 mm, respectively.
An adhesive lining is not specified in the supplied HSMB12WHITE product information. Do not assume the tubing provides an adhesive seal or waterproof protection without confirmation from the manufacturer's technical documentation.
Yes. White heat shrink tubing can help distinguish conductors within an appropriately designed wiring identification system. However, conductor identification must comply with applicable electrical installation requirements, and white sleeving must not replace mandatory protective conductor markings.
Partex cable identification and protection products support professional electrical installation, industrial wiring and control panel assembly. The HSMB12WHITE 2:1 heat shrink tubing provides a practical solution for fine-wire insulation, miniature conductor protection and organised electrical wiring, with a 20 m pack length suitable for workshop, production and maintenance applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.