Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB12BLACK black 2:1 heat shrink tubing with a 1.2 mm supplied diameter, 0.6 mm recovered diameter and 20 m pack length, designed for electrical insulation, mechanical protection and professional finishing of fine wires, miniature conductors and compact electrical assemblies.
£13.90
The Partex HSMB12BLACK is a compact 2:1 black heat shrink tubing designed for electrical insulation, wire protection and professional finishing of small-diameter electrical conductors. Featuring a nominal supplied diameter of 1.2 mm and a nominal fully recovered diameter of 0.6 mm, this fine-diameter heat shrink sleeving provides a practical solution for protecting appropriately sized wires, small conductor sections and miniature electrical connections.
Part of the Partex heat shrink tubing range, HSMB12BLACK uses heat-activated radial contraction to form a close-fitting protective covering around compatible wires and components. The tubing helps protect covered conductors against abrasion, rubbing and routine handling damage while providing a neat, professional finish. Its black colour creates a discreet and consistent appearance for electronic assemblies, control wiring and compact cable harnesses.
With a 2:1 nominal shrink ratio, the tubing can contract from its supplied diameter of 1.2 mm towards a recovered diameter of 0.6 mm when heated correctly. Supplied in a convenient 20 m pack, Partex HSMB12BLACK is suitable for electrical contractors, electronics technicians, control panel manufacturers, maintenance engineers and OEM equipment builders requiring small-diameter protective sleeving for precision wiring applications.
The Partex HSMB12BLACK is designed for wiring applications where a compact protective sleeve is required. Its nominal 1.2 mm supplied diameter allows the tubing to be positioned over appropriately sized fine conductors and miniature wiring sections before heat is applied. Once heated correctly, the tubing contracts around the underlying wire to create a close-fitting protective covering.
The 2:1 shrink ratio provides a practical recovery range for small conductors. With a nominal fully recovered diameter of 0.6 mm, the tubing can reduce to approximately half its original diameter. Correct sizing is especially important for fine-diameter heat shrink tubing: the conductor must fit through the supplied tubing, and the sleeve must recover sufficiently to grip the finished wire without placing excessive stress on delicate components.
Fine-diameter heat shrink tubing is particularly useful in electronic equipment, instrumentation systems and compact control wiring, where individual conductors may require additional insulation or protection. HSMB12BLACK can help protect suitable wiring sections against routine mechanical wear while maintaining a relatively compact finished assembly. Its black finish provides a consistent appearance for wiring looms, equipment assemblies and miniature cable harnesses.
The 20 m pack is convenient for electrical assembly workshops, maintenance departments and OEM production environments that regularly prepare small-diameter wiring. Installers can cut the required length, slide it over the conductor and apply controlled heat using a suitable heat gun. When working with miniature conductors, careful temperature control and even heating are particularly important to avoid damaging the underlying wire insulation, soldered connections or nearby electronic components.
Where the tubing is used to cover a soldered or crimped connection, the installer must confirm that the complete connection fits through the nominal 1.2 mm opening before shrinking. For applications requiring a defined voltage rating, environmental sealing, flame classification or other specialist performance, the relevant product specifications must be checked. Standard heat shrink tubing should not be assumed to provide a watertight seal without a confirmed product rating.
Tick the specs you need, then view products that match.
| Supply Format | 20 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 0.6–1.2 mm | |
| Internal Diameter Before Shrinking (mm) | 1.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Black | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | 2:1 Heat Shrink Tubing | |
| Manufacturer part number | HSMB12BLACK | |
| Product type | Fine-diameter heat shrink tubing / electrical insulation sleeving | |
| Nominal shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 1.2 mm | |
| Nominal diameter after recovery | 0.6 mm | |
| Colour | Black | |
| Pack length | 20 m | |
| Shrinking method | Controlled application of heat | |
| Primary functions | Small-wire insulation, mechanical protection and professional wiring finishes | |
| Suitable component types | Appropriately sized fine wires, miniature conductors and compact wiring sections | |
| Installation | Cut to length, position over the wire and apply heat evenly | |
| Typical installation environments | Electronic assemblies, instrumentation, control wiring and cable harnesses | |
| HS Code | 39269097 |
The Partex HSMB12BLACK is used for electrical insulation, mechanical protection and professional finishing of appropriately sized fine wires and miniature conductor assemblies. Typical applications include electronics wiring, instrumentation, control systems, small cable harnesses and electrical equipment assembly.
A 2:1 shrink ratio means the tubing can contract to approximately half its original nominal diameter when fully recovered under suitable heating conditions. This allows it to fit closely around compatible small wires and components.
The tubing has a nominal supplied diameter of 1.2 mm and a nominal fully recovered diameter of 0.6 mm. The wire must fit inside the tubing before shrinking, and the tubing must recover sufficiently around the finished conductor.
Partex HSMB12BLACK is supplied in a 20 m pack. The tubing can be cut into shorter sections to suit individual wire insulation and protection requirements.
Yes. Its 1.2 mm nominal supplied diameter and 0.6 mm nominal recovered diameter make it suitable for appropriately sized fine conductors. The outside diameter of the wire, including its existing insulation, must be checked before selecting the tubing.
Yes, provided the soldered connection is small enough to fit through the tubing before shrinking and the finished sleeve meets the application's electrical and mechanical requirements. Because the supplied diameter is only 1.2 mm, connection dimensions must be checked carefully.
The tubing provides protective sleeving around suitable wires and connections, but waterproof or moisture-sealing performance should not be assumed without a confirmed product rating. Where environmental sealing is required, an appropriately specified adhesive-lined heat shrink product should be selected.
Ensure the electrical circuit is safely isolated, cut the tubing to the required length and slide it over the wire or suitable connection. Apply controlled, even heat using an appropriate heat gun until the tubing has contracted around the conductor. Allow it to cool before handling, taking particular care to avoid overheating delicate wire insulation and nearby electronic components.
Partex heat shrink tubing provides electrical contractors, electronics technicians, control panel builders, OEM manufacturers and maintenance teams with a practical solution for wire insulation, mechanical protection and professional wiring finishes. The HSMB12BLACK variant combines a nominal 1.2 mm supplied diameter, 0.6 mm recovered diameter, 2:1 shrink ratio and convenient 20 m pack length for efficient preparation and protection of appropriately sized fine electrical conductors.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.