HSMB127WHITE Partex 2:1 heat shrink tubing, 12.7/6.3mm, white, pack 8m

HSMB127WHITE Partex 2:1 heat shrink tubing, 12.7/6.3mm, white, pack 8m

Partex HSMB127WHITE is a white 2:1 heat shrink tubing with a 12.7 mm supplied diameter, 6.3 mm recovered diameter and 8 m pack length, designed for electrical insulation, cable protection and colour-coded wiring applications.

SKU: HSMB127WHITEMPN: HSMB127WHITE
Price
List Price £17.38 ex VAT
Your Price (ex VAT) Save 20%
£13.90 20% OFF
You save £3.48 per pack Price per pack of 8
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £13.90
Trade pricing is personalised to your account

Manufacturer Lead Time

£13.90

Why Choose the Partex HSMB127WHITE 2:1 White Heat Shrink Tubing?

The Partex HSMB127WHITE is a versatile white heat shrink tubing designed for electrical insulation, cable protection and colour-coded wire identification in industrial and commercial electrical installations. Featuring a 2:1 shrink ratio, the tubing contracts to approximately half its original internal diameter when heated, creating a close-fitting protective sleeve around suitably sized cables, wires and electrical components.

As part of the Partex HSMB heat shrink tubing range, HSMB127WHITE provides a practical solution for electrical contractors, control panel builders and maintenance engineers requiring organised wiring and dependable cable protection. Its white finish supports visual cable identification and provides a clean, consistent appearance for electrical assemblies, cable harnesses and industrial control panel installations.

With a nominal supplied internal diameter of 12.7 mm, a nominal fully recovered internal diameter of 6.3 mm and an 8 m pack length, this heat shrink tubing is suitable for a variety of cable insulation and identification tasks. Its cut-to-length format allows installers to prepare individual protective sleeves for cable sections, electrical connections and wiring assemblies.

Key Advantages

  • 2:1 heat shrink ratio provides a close-fitting sleeve around appropriately sized cables and electrical components.
  • 12.7 mm supplied internal diameter reduces to approximately 6.3 mm after full recovery.
  • White finish supports visual cable identification and organised wiring systems.
  • Provides additional electrical insulation and mechanical protection when correctly selected and installed.
  • 8 m pack length allows flexible cutting for individual installation requirements.
  • Suitable for industrial control panels, electrical assemblies and cable harness applications.
  • Helps protect covered cable sections against abrasion and routine handling damage.
  • Supports neat, professional and easily identifiable electrical wiring installations.

Key Features

  • Partex HSMB heat shrink tubing range.
  • 2:1 shrink ratio for controlled diameter reduction.
  • 12.7 mm nominal supplied internal diameter.
  • 6.3 mm nominal fully recovered internal diameter.
  • White colour for cable identification and consistent wiring finishes.
  • 8 m pack length for flexible cutting and installation.
  • Heat-activated shrinking creates a close-fitting protective covering.
  • Suitable for cable insulation, wire protection and identification applications.
  • Can be cut into shorter sections for individual cable and connection requirements.
  • Designed for electrical installation, maintenance and cable harness assembly work.

Reliable Cable Insulation and Professional Wiring Protection

Heat shrink tubing provides a convenient method of protecting, insulating and identifying electrical wiring. When suitable heat is applied, the tubing contracts around the cable or component, forming a close-fitting sleeve that helps protect against abrasion, handling damage and accidental contact with covered conductive parts. The Partex HSMB127WHITE features a 2:1 shrink ratio, allowing its nominal internal diameter to reduce from 12.7 mm to 6.3 mm when fully recovered.

The white finish is particularly useful in cable management systems where visual identification and a consistent appearance are important. It can be installed over appropriately sized insulated conductors, cable sections and electrical assemblies to provide additional protection. For dependable results, the tubing should be selected according to the cable dimensions, required insulation performance and installation conditions, then shrunk using suitable controlled heating equipment. Where conductor colours have specific meanings, the tubing must be used in accordance with applicable electrical wiring standards.

Typical Applications

  • Electrical cable insulation and protection.
  • Colour-coded cable and wire identification.
  • Industrial control panel wiring and cable management.
  • Low-voltage electrical wiring assemblies.
  • Protective sleeving for appropriately sized cable joints and connections.
  • Industrial automation equipment and control systems.
  • Electrical equipment maintenance and refurbishment.
  • OEM cable harnesses and wiring assemblies.
  • Protection of cable sections exposed to routine handling and abrasion.
  • General electrical installation and workshop applications.

Technical Specifications

Tick the specs you need, then view products that match.

Supply Format 8 m
Device Type Heat-shrink tubing
Material Polyolefin
Cable Diameter (mm) 6.3–12.7 mm
Internal Diameter Before Shrinking (mm) 12.7 mm
Shrink Ratio 2:1
Colour White
Adhesive Lined No
Manufacturer Partex
Product range HSMB Heat Shrink Tubing
Part number HSMB127WHITE
Product type Heat shrinkable electrical insulation tubing
Shrink ratio 2:1
Nominal supplied internal diameter 12.7 mm
Nominal fully recovered internal diameter 6.3 mm
Colour White
Pack length 8 m
Installation method Heat shrinking
Application Electrical insulation, cable protection and wire identification
Format Cut-to-length tubing
HS Code 39269097

Frequently Asked Questions

What is the Partex HSMB127WHITE heat shrink tubing used for?

The Partex HSMB127WHITE is used for electrical insulation, cable protection and colour-coded wiring identification. It provides a close-fitting protective sleeve around suitably sized wires, cable sections and electrical components.

What does the 2:1 shrink ratio mean?

A 2:1 shrink ratio means that the tubing can reduce to approximately half its original internal diameter when fully recovered. The HSMB127WHITE has a nominal supplied internal diameter of 12.7 mm and a nominal recovered internal diameter of 6.3 mm.

How much tubing is supplied in one pack?

Each pack contains 8 m of white heat shrink tubing, which can be cut into shorter sections to suit individual wiring, identification and cable protection requirements.

Can Partex HSMB127WHITE be used for cable identification?

Yes. The white finish makes the tubing suitable for visual cable identification and colour-coded wiring systems. It can help distinguish selected cable groups or components, provided the identification method complies with applicable electrical installation standards.

How is Partex HSMB127WHITE installed?

Cut the tubing to the required length, position it over a suitably sized wire or component and apply controlled heat using an appropriate heat gun. The tubing contracts around the component to create a close-fitting protective sleeve. Ensure the electrical equipment is safely isolated before installation and avoid overheating the tubing or surrounding insulation.

Trusted by Electrical Installers and Panel Builders

Partex heat shrink tubing provides a practical solution for electrical professionals who require dependable cable protection, organised wiring and professional installation finishes. The HSMB127WHITE combines a versatile 2:1 shrink ratio with a clean white finish, making it a useful choice for electrical assemblies, industrial control panels and colour-coded cable management systems.