Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSMB127RED red heat shrink tubing with a 2:1 shrink ratio, 12.7 mm supplied diameter, 6.3 mm recovered diameter and 8 m pack length for electrical insulation, cable identification and wire protection.
£13.90
The Partex HSMB127RED is a versatile and reliable red heat shrink tubing designed for electrical insulation, cable identification and protection of wires and electrical connections. Featuring a 2:1 shrink ratio, this tubing contracts when heated to provide a neat, close-fitting protective covering around compatible cables, conductors and electrical components.
As part of the Partex HSMB heat shrink tubing range, it provides a practical solution for electrical installers, maintenance engineers and control panel builders requiring effective cable protection and identification. Its red colour supports clear visual identification and colour-coded wiring installations, while its heat-activated shrinking action enables a professional finish on cable assemblies and electrical connections.
With a nominal supplied diameter of 12.7 mm, a recovered diameter of 6.3 mm and an 8 m pack length, the HSMB127RED is suitable for insulating and protecting appropriately sized cables in industrial machinery, electrical control panels and general wiring applications.
Heat shrink tubing is widely used in electrical engineering to provide insulation, protect conductors and improve the organisation of cable assemblies. When suitable heat is applied, the tubing contracts around the underlying cable or component, creating a close-fitting sleeve that helps reduce exposure to abrasion and everyday handling damage.
The Partex HSMB127RED is designed for applications where red cable identification and heat shrink protection are required. Its 2:1 shrink ratio makes it suitable for a range of appropriately sized conductors and cable assemblies, while the convenient 8 m pack allows electrical engineers and installers to cut the tubing to the required length for each installation. The red finish can be used for designated circuits, cable groups and wiring identification schemes where this colour is specified.
Tick the specs you need, then view products that match.
| Supply Format | 8 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 6.3–12.7 mm | |
| Internal Diameter Before Shrinking (mm) | 12.7 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Red | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | HSMB Heat Shrink Tubing | |
| Model | HSMB127RED | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 12.7 mm | |
| Nominal recovered diameter | 6.3 mm | |
| Colour | Red | |
| Pack length | 8 m | |
| Installation method | Heat shrinking | |
| Primary function | Electrical insulation, cable identification and wire protection | |
| Typical installation | Electrical cables, wiring assemblies and compatible cable connections | |
| HS Code | 39269097 |
The Partex HSMB127RED is used for electrical insulation, cable identification and wire protection in control panels, industrial machinery and general electrical installations.
A 2:1 shrink ratio means the tubing can contract from its nominal supplied diameter of 12.7 mm to approximately 6.3 mm when correctly heated under suitable conditions.
The tubing is red, making it suitable for visual cable identification and colour-coded electrical wiring installations where red identification is required.
The Partex HSMB127RED is supplied in an 8 m pack, allowing installers to cut individual sections to suit their cable protection and identification requirements.
The tubing can be installed on appropriately sized electrical wires, cable joints and connections in industrial control panels, electrical cabinets, machinery and cable assemblies, subject to the requirements of the installation.
Partex cable identification and protection products are used by electrical engineers, maintenance professionals and industrial panel builders to support organised and dependable wiring installations. The HSMB127RED heat shrink tubing combines practical red cable identification with convenient heat-activated insulation and protection for professional electrical applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.