Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSKIT212.7 2:1 heat shrink tubing kit containing 20 pre-cut 250 mm lengths in ten colours, with a 12.7 mm supplied diameter and 6.3 mm nominal recovered diameter, made from flame-retardant cross-linked polyolefin for electrical insulation, cable identification and protection.
£8.14
The Partex HSKIT212.7 is a versatile 2:1 heat shrink tubing kit designed for electrical insulation, cable identification and protective sleeving in industrial, commercial and electrical engineering applications. Featuring heat-shrinkable tubing with a nominal supplied diameter of 12.7 mm and a nominal recovered diameter of 6.3 mm, this kit provides a practical solution for insulating wires, protecting electrical connections and organising cable assemblies.
As part of the Partex heat shrink sleeving kit range, the HSKIT212.7 offers a convenient selection of tubing for electrical installation and maintenance work. Its 2:1 shrink ratio allows the sleeving to contract around cables and components when heated, creating a close-fitting protective covering that helps improve cable insulation, reduce mechanical abrasion and deliver a neat, professional finish.
The Partex HSKIT212.7 is particularly suitable for electricians, control panel builders, maintenance engineers and industrial manufacturers requiring reliable heat shrink sleeving for everyday wiring applications. Its kit packaging provides a convenient way to keep suitable tubing available for cable identification, electrical repairs, wiring harness assembly and industrial automation installations.
The Partex HSKIT212.7 heat shrink tubing kit provides an effective method of insulating and protecting electrical cables, wire connections and cable assemblies. When heated using suitable equipment, the tubing contracts around the underlying component, creating a close-fitting protective sleeve that helps reduce exposure to abrasion and mechanical damage.
Its 2:1 shrink ratio makes it particularly useful for covering cables, wire joints and electrical components where a reduction in sleeve diameter is required. The tubing can be positioned over a cable or connector before heating, allowing it to contract around the assembly and provide a neat, consistent finish.
The kit format makes the HSKIT212.7 convenient for electrical installation, industrial maintenance and cable assembly work. It is suitable for use in control cabinets, electrical equipment and machinery wiring systems where dependable insulation and professional cable management are important. As standard heat shrink sleeving, it should not be assumed to provide a waterproof seal without an appropriate sealing system.
Tick the specs you need, then view products that match.
| Adhesive Lined | No | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 6.3–12.7 mm | |
| Internal Diameter Before Shrinking (mm) | 12.7 mm | |
| Shrink Ratio | 2:1 | |
| Manufacturer | Partex | |
| Series | Heat Shrink Sleeving Kits | |
| Model | HSKIT212.7 | |
| Product type | Heat shrink tubing kit | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 12.7 mm | |
| Nominal recovered internal diameter | 6.3 mm | |
| Packaging | Kit | |
| Installation method | Heat shrinking using suitable hot-air equipment | |
| Primary function | Electrical insulation and cable protection | |
| Secondary function | Cable identification and mechanical protection | |
| Typical installation | Electrical cables, connectors, wiring harnesses and cable terminations | |
| HS Code | 39269097 |
The Partex HSKIT212.7 is used for electrical insulation, cable protection, cable identification and protective covering of wires, connectors and cable assemblies in industrial and electrical installations.
The tubing has a 2:1 shrink ratio, meaning its nominal internal diameter reduces from 12.7 mm to approximately 6.3 mm when fully recovered.
The Partex HSKIT212.7 is supplied in a kit format, providing a convenient solution for electrical installation, maintenance and cable protection applications.
The tubing is suitable for cables, wiring harnesses and electrical components that fit within its 12.7 mm supplied diameter and can be securely covered by its nominal 6.3 mm recovered diameter. The correct tubing size should be selected according to the dimensions of the cable or assembly.
Cut the tubing to the required length, position it over the cable or component and apply controlled heat using a suitable hot-air heat gun until the tubing contracts evenly around the surface. Follow the manufacturer's installation instructions and avoid overheating or damaging the underlying cable insulation.
Partex heat shrink tubing provides a practical solution for electrical insulation, cable identification and industrial maintenance applications. The HSKIT212.7 combines a versatile 2:1 shrink ratio, convenient kit packaging and reliable protective sleeving to support professional cable management in electrical engineering, industrial automation and maintenance installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.