HSKIT14.8 Partex 2:1 heat shrink tubing, 4.8/2.4mm, pack Kit

HSKIT14.8 Partex 2:1 heat shrink tubing, 4.8/2.4mm, pack Kit

Partex HSKIT14.8 2:1 heat shrink tubing kit with a 4.8 mm supplied internal diameter and 2.4 mm nominal recovered internal diameter. Suitable for electrical insulation, cable protection and wiring organisation in control panels, electrical equipment and maintenance applications.

SKU: HSKIT14.8MPN: HSKIT14.8
Price
List Price £4.98 ex VAT
Your Price (ex VAT) Save 20%
£3.98 20% OFF
You save £0.996 per unit
In stock. Ships today if ordered before 2pm Part on backorder Some of this quantity is on a manufacturer lead time. We'll email you a confirmed lead time.
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £3.98
Trade pricing is personalised to your account

1 in stock (can be backordered)

£3.98

Why Choose the Partex HSKIT14.8 2:1 Heat Shrink Tubing Kit?

The Partex HSKIT14.8 is a practical 2:1 heat shrink tubing kit designed for electrical insulation, cable protection, wire identification and professional cable management. Manufactured by Partex, this heat shrink sleeving provides a convenient solution for protecting insulated conductors, wiring connections and cable assemblies in industrial automation systems, electrical control panels and general electrical installations.

Featuring a 2:1 shrink ratio, the tubing contracts to approximately half its original internal diameter when heated appropriately. With a supplied internal diameter of 4.8 mm and a nominal recovered diameter of 2.4 mm, it is particularly useful for compatible smaller-diameter wires, insulated conductors and cable connections requiring a neat, close-fitting protective sleeve.

Supplied in a convenient kit format, the Partex HSKIT14.8 offers a practical option for electricians, control panel builders, OEM manufacturers and maintenance engineers undertaking cable insulation and protection tasks. The tubing can be cut to the required length and installed using controlled heat, making it suitable for a wide range of electrical assembly, repair and maintenance applications.

Key Advantages

  • 2:1 heat shrink ratio provides a close-fitting protective sleeve when correctly installed.
  • 4.8 mm supplied internal diameter accommodates compatible smaller-diameter insulated wires and cable connections.
  • 2.4 mm nominal recovered diameter allows effective shrinking around appropriately sized conductors.
  • Convenient kit format provides a practical solution for electrical installation and maintenance tasks.
  • Heat-activated installation enables the tubing to contract around compatible cables and components.
  • Helps protect covered wiring against abrasion, handling damage and general mechanical wear.
  • Can be cut to application-specific lengths for flexible cable insulation and protection.

Key Features

  • Partex HSKIT14.8 heat shrink tubing kit.
  • 2:1 nominal shrink ratio.
  • 4.8 mm nominal internal diameter before shrinking.
  • 2.4 mm nominal recovered internal diameter.
  • Kit packaging for convenient electrical installation and maintenance use.
  • Heat-activated shrinking for a close-fitting protective sleeve.
  • Suitable for electrical insulation, cable protection and wiring organisation.
  • Can be cut to the required length for individual applications.
  • Suitable for compatible wiring in control panels, machinery and electrical equipment.

Reliable Electrical Insulation and Small-Diameter Cable Protection

The Partex HSKIT14.8 heat shrink tubing provides a convenient method of insulating and protecting compatible electrical wiring. When suitable heat is applied, the tubing contracts around the insulated wire or component, creating a close-fitting sleeve that helps protect against abrasion and handling damage. Its 2:1 shrink ratio allows the tubing to recover from a nominal supplied internal diameter of 4.8 mm to approximately 2.4 mm.

This size is particularly useful for compatible smaller-diameter conductors, individual wires and cable connections found in electrical control panels, automation equipment and wiring harnesses. To achieve an effective fit, the tubing should be large enough to pass over the complete assembly before shrinking while retaining sufficient recovery to grip the finished application.

The kit format makes the HSKIT14.8 a practical choice for installation, assembly and maintenance work where heat shrink tubing is required for individual cable protection tasks. The tubing can be cut to the appropriate length and positioned before applying controlled heat. Its suitability for a particular electrical application should be confirmed against the manufacturer's technical specifications, including any required electrical and environmental performance ratings.

How to Install Partex HSKIT14.8 Heat Shrink Tubing

  1. Select the correct size: Confirm that the 4.8 mm supplied internal diameter will pass over the cable or component and that the 2.4 mm nominal recovered diameter is suitable for the finished assembly.
  2. Cut to length: Prepare a section of tubing long enough to cover the intended area, allowing for any longitudinal shrinkage specified by the manufacturer.
  3. Position the tubing: Slide the tubing over the insulated wire, connection or component before completing any assembly that would prevent it from being fitted.
  4. Apply controlled heat: Use an appropriate heat source to shrink the tubing evenly around the application.
  5. Inspect the finished sleeve: Allow the tubing to cool and check that it has formed a close, even fit without damaging the underlying insulation.

Important: Follow the manufacturer's installation guidance and avoid excessive heat. Standard heat shrink tubing should not be assumed to provide a watertight seal unless the relevant product specification confirms that capability.

Typical Applications

  • Electrical wire insulation and protection.
  • Industrial control panel wiring and assembly.
  • PLC and automation equipment cable management.
  • Protection of compatible small-diameter insulated conductors.
  • Electrical connection and cable repair work.
  • Wiring harness assembly and cable organisation.
  • OEM machinery wiring and electrical equipment manufacturing.
  • Routine electrical installation and maintenance applications.

Technical Specifications

Tick the specs you need, then view products that match.

Adhesive Lined No
Material Polyolefin
Cable Diameter (mm) 2.4–4.8 mm
Internal Diameter Before Shrinking (mm) 4.8 mm
Shrink Ratio 2:1
Device Type Heat-shrink tubing
Manufacturer Partex
Model HSKIT14.8
Product type Heat shrink tubing kit
Shrink ratio 2:1
Supplied internal diameter 4.8 mm
Nominal recovered internal diameter 2.4 mm
Pack format Kit
Shrinking method Heat activated
Primary function Electrical insulation, cable protection and wiring organisation
Installation method Cut to length, position over the cable or component and apply controlled heat
HS Code 39269097

Frequently Asked Questions

What is the Partex HSKIT14.8 heat shrink tubing kit used for?

The Partex HSKIT14.8 is used for electrical insulation, cable protection and wiring organisation. Its 4.8 mm supplied internal diameter makes it suitable for compatible smaller-diameter wires and insulated connections in control panels, machinery wiring and electrical maintenance applications.

What does the 2:1 shrink ratio mean?

A 2:1 shrink ratio means the tubing can shrink to approximately half its original internal diameter when sufficient heat is applied. The HSKIT14.8 tubing has a nominal supplied internal diameter of 4.8 mm and a nominal recovered internal diameter of 2.4 mm.

What size is the Partex HSKIT14.8 tubing?

The tubing has a 4.8 mm supplied internal diameter and a 2.4 mm nominal recovered internal diameter. It is suitable for compatible wire and cable applications where the tubing can pass over the assembly before shrinking and recover sufficiently to achieve a close fit.

How is the Partex HSKIT14.8 supplied?

The Partex HSKIT14.8 is supplied in a kit format. The exact number of pieces, individual lengths and any included colour assortment should be checked against the manufacturer's kit specification.

What are the benefits of using a heat shrink tubing kit?

A heat shrink tubing kit provides a convenient format for electrical installation, repair and maintenance tasks. The tubing can be cut to the required length and heat-shrunk around compatible wires to provide additional insulation and protection against abrasion and handling damage. The 2:1 shrink ratio also helps achieve a close fit around appropriately sized cable assemblies.

Trusted Cable Identification and Protection from Partex

Partex cable identification and electrical installation products support organised, dependable wiring systems. The HSKIT14.8 2:1 heat shrink tubing kit provides a practical solution for insulating and protecting compatible smaller-diameter cables, insulated conductors and wiring connections in industrial automation, control panel assembly and electrical maintenance applications.