Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSKIT138.1 2:1 standard-wall heat shrink tubing kit containing ten 250 mm lengths in five Euro colours, with a 38.1 mm supplied diameter and 19 mm nominal recovered diameter, manufactured from flame-retardant zero-halogen cross-linked polyolefin for electrical insulation, cable identification and protection.
£16.83
The Partex HSKIT138.1 is a practical 2:1 heat shrink tubing kit designed for electrical insulation, cable protection and professional cable management in industrial, commercial and electrical engineering applications. Featuring heat-shrinkable sleeving with a nominal diameter of 38.1 mm before shrinking and approximately 19 mm after recovery, this kit provides a convenient solution for insulating and protecting larger cables, electrical connections and wiring assemblies.
As part of the Partex heat shrink tubing range, the HSKIT138.1 is designed to provide a close-fitting protective covering when heated using suitable equipment. Its 2:1 shrink ratio allows the tubing to contract around cables and components, helping improve insulation coverage, reduce exposure to mechanical abrasion and create neat, professional electrical installations.
Supplied in a convenient kit format, the Partex HSKIT138.1 is suitable for electrical contractors, control panel builders, industrial maintenance engineers and equipment manufacturers requiring heat shrink sleeving for cable protection and assembly work. The tubing can be cut to suit individual installation requirements, making it useful for electrical repairs, cable terminations and industrial wiring applications.
The Partex HSKIT138.1 heat shrink tubing kit provides an effective method of insulating and protecting electrical cables, wire connections and cable assemblies. When exposed to controlled heat, the tubing contracts around the underlying component, creating a close-fitting protective covering that helps reduce exposure to abrasion and mechanical damage.
Its 2:1 shrink ratio makes it particularly useful for covering larger cables and electrical components where a reduction in sleeve diameter is required. The tubing can be positioned over a cable or connector before heating, allowing it to contract around the assembly and provide a neat, consistent finish.
The kit format offers a convenient solution for electrical installation and maintenance work, while the large tubing diameter supports applications involving substantial cable bundles and wiring assemblies. The tubing is intended for insulation and mechanical protection and should not be assumed to provide a waterproof seal unless the installation incorporates a suitable sealing system.
Tick the specs you need, then view products that match.
| Adhesive Lined | No | |
|---|---|---|
| Material | Polyolefin | |
| Cable Diameter (mm) | 19–38.1 mm | |
| Internal Diameter Before Shrinking (mm) | 38.1 mm | |
| Shrink Ratio | 2:1 | |
| Device Type | Heat-shrink tubing | |
| Manufacturer | Partex | |
| Model | HSKIT138.1 | |
| Product type | Heat shrink tubing kit | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 38.1 mm | |
| Nominal recovered internal diameter | 19 mm | |
| Packaging | Kit | |
| Installation method | Heat shrinking using suitable hot-air equipment | |
| Primary function | Electrical insulation and cable protection | |
| Secondary function | Cable management and mechanical protection | |
| Typical installation | Electrical cables, connectors, wiring harnesses and cable terminations | |
| HS Code | 39269097 |
The Partex HSKIT138.1 is used for electrical insulation, cable protection and protective covering of larger wires, connectors, cable joints and wiring assemblies in industrial and electrical installations.
The tubing has a 2:1 shrink ratio, meaning its nominal internal diameter reduces from 38.1 mm to approximately 19 mm when fully recovered.
The Partex HSKIT138.1 is supplied in a kit format, providing a convenient option for electrical installation, maintenance and cable protection applications.
The tubing is suitable for cables, wiring harnesses and electrical components that fit within its 38.1 mm supplied diameter and can be securely covered by its nominal 19 mm recovered diameter. The correct tubing size should be selected according to the dimensions of the cable or assembly.
Cut the tubing to the required length, position it over the cable or component and apply controlled heat using a suitable hot-air heat gun until the tubing contracts evenly around the surface. Follow the manufacturer's installation instructions and avoid overheating or damaging the underlying cable insulation.
Partex heat shrink tubing provides a practical solution for electrical insulation, cable management and industrial maintenance applications. The HSKIT138.1 combines a versatile 2:1 shrink ratio, large-diameter protective sleeving and convenient kit packaging to support professional cable protection in electrical engineering, industrial automation and maintenance installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.