Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSKIT125.4 2:1 heat shrink tubing kit featuring a 25.4 mm supplied internal diameter and 12.7 mm nominal recovered internal diameter, designed for electrical insulation, cable protection and professional cable management applications.
£9.50
The Partex HSKIT125.4 is a practical 2:1 heat shrink tubing kit designed for electrical insulation, cable protection, wire identification and professional cable management. Featuring a nominal 25.4 mm supplied internal diameter and a 12.7 mm recovered internal diameter, the tubing contracts when heated to provide a close-fitting protective sleeve around appropriately sized cables, conductors and electrical components.
Manufactured by Partex, a specialist in cable identification and electrical installation products, the HSKIT125.4 offers a convenient solution for electrical contractors, control panel builders, maintenance engineers and industrial wiring professionals. Its 2:1 shrink ratio allows the tubing to be positioned over a cable or electrical connection before shrinking around the underlying component to provide additional insulation and mechanical protection.
Supplied in a kit pack format, the Partex HSKIT125.4 is intended for electrical installation, cable assembly and maintenance applications requiring heat shrink sleeving. The exact number of pieces, individual lengths and colour configuration have not been specified and should be confirmed against the manufacturer's kit contents before ordering.
With its 25.4 mm nominal supplied internal diameter, this heat shrink tubing is particularly useful for larger conductors, medium-sized cable bundles, electrical terminations and protective sleeving applications. It provides a practical way to create a neat, organised finish while helping protect underlying cable insulation against abrasion and everyday mechanical wear.
Heat shrink tubing is widely used in electrical and industrial installations to provide protective sleeving around conductors, cable connections and electrical components. When suitable heat is applied, the tubing contracts around the underlying component, creating a close-fitting covering that can help protect against abrasion and provide additional electrical insulation where the product is appropriately specified.
The Partex HSKIT125.4 features tubing with a 2:1 shrink ratio, allowing its nominal internal diameter to reduce from 25.4 mm to 12.7 mm. This makes it suitable for applications where the tubing must initially pass over a wider section of cable or connection before shrinking around the intended area.
The 25.4 mm supplied diameter is particularly useful for medium-sized cable assemblies, grouped conductors and suitably sized electrical connections. By selecting the correct tubing size, installers can create a neat protective finish that helps reduce direct exposure of the underlying cable surface to minor mechanical wear.
Heat shrink tubing can also support cable identification and organised wiring systems when used alongside suitable cable markers, labels or other identification products. Where colour-coded conductor identification is required, the tubing colour and identification method must comply with applicable electrical regulations. As the colour configuration of this kit has not been specified, no particular conductor identification function should be assumed.
For effective installation, ensure the supplied internal diameter is large enough to pass over the intended cable, connector or component and that the recovered diameter is suitable for achieving the required fit. Cut the tubing to the required length where appropriate, position it over the intended area and apply controlled, even heat using a suitable heat gun.
Follow the manufacturer's installation recommendations and avoid excessive heating of the tubing or underlying cable insulation. The tubing should not be used as a substitute for a correctly designed electrical connection, connector or mechanical strain relief where one is required.
Where a waterproof connection, adhesive seal or specified environmental barrier is required, select a heat shrink product with those verified properties. The HSKIT125.4 should not be assumed to provide adhesive sealing or a particular waterproof rating without confirmation from the manufacturer's technical documentation.
Tick the specs you need, then view products that match.
| Adhesive Lined | No | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Manufacturer | Partex | |
| Model / Part number | HSKIT125.4 | |
| Product type | Heat shrink tubing kit | |
| Shrink ratio | 2:1 | |
| Supplied internal diameter | 25.4 mm | |
| Nominal recovered internal diameter | 12.7 mm | |
| Pack format | Kit | |
| Installation method | Heat shrinking | |
| Primary function | Electrical insulation, cable protection and cable management | |
| Typical applications | Electrical wiring, cable assemblies, control panels and industrial maintenance | |
| HS Code | 39269097 |
The Partex HSKIT125.4 is a heat shrink tubing kit intended for electrical insulation, cable protection and cable management. Its nominal 25.4 mm supplied diameter makes it suitable for appropriately sized electrical conductors, cable connections, wire bundles and industrial wiring applications.
The tubing has a 2:1 shrink ratio, with a nominal supplied internal diameter of 25.4 mm and a nominal recovered internal diameter of 12.7 mm when fully shrunk under suitable heating conditions.
The HSKIT125.4 is supplied in a kit pack format. However, the exact number of tubing pieces, individual lengths and colours have not been specified. Check the manufacturer's product specification or supplier listing to confirm the complete kit contents before ordering.
Yes. The Partex HSKIT125.4 is intended for cable protection and electrical insulation applications where the tubing dimensions and product properties are suitable. When correctly installed, heat shrink tubing provides a close-fitting protective covering that can help reduce abrasion and protect the underlying cable insulation. Always verify the product's electrical ratings for the intended application.
Select a suitable tubing section, position it over the intended cable, conductor bundle or electrical component and apply controlled, even heat using an appropriate heat gun. The tubing contracts towards its nominal recovered diameter to provide a close-fitting protective sleeve. Follow the manufacturer's installation instructions and ensure electrical circuits are safely isolated before working on them.
Partex cable identification and electrical installation products are used by electrical engineers, control panel builders and industrial maintenance professionals. The HSKIT125.4 2:1 heat shrink tubing kit provides a practical solution for electrical insulation, cable protection and organised cable management in professional industrial and commercial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.