Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HSKIT112.7 2:1 heat shrink tubing kit with a 12.7 mm nominal supplied diameter and 6.3 mm recovered diameter, designed for electrical insulation, cable protection and wiring maintenance applications.
£5.84
The Partex HSKIT112.7 is a practical and versatile 2:1 heat shrink tubing kit designed for electrical insulation, cable protection and wiring organisation in industrial, commercial and general electrical installations. Featuring tubing with a nominal supplied diameter of 12.7 mm and a nominal recovered diameter of 6.3 mm, this kit provides a convenient solution for protecting electrical wires, cable joints and compatible connections.
With a 2:1 shrink ratio, the tubing contracts to approximately half its original diameter when suitable heat is applied, forming a close-fitting protective sleeve around cables and components. This helps provide additional insulation, reduce exposure to abrasion and deliver a neat, professional finish to electrical wiring assemblies.
As part of the Partex heat shrink tubing range, the HSKIT112.7 is suitable for electrical contractors, maintenance engineers, panel builders and cable assembly specialists. Its convenient kit format makes it useful for workshop applications, electrical maintenance, cable preparation and on-site wiring repairs.
Heat shrink tubing provides a practical method of insulating and protecting electrical cables and connections. When suitable heat is applied, the tubing contracts around the underlying cable or component, forming a protective sleeve that helps reduce exposure to abrasion and general mechanical damage.
The Partex HSKIT112.7 is particularly useful for wiring applications requiring a 12.7 mm nominal supplied diameter. Its 2:1 shrink ratio allows the tubing to recover towards a nominal diameter of 6.3 mm, making it suitable for compatible cables, wire joints, terminals and electrical assemblies.
For effective installation, the tubing should be selected to pass over the largest section of the cable or connection before shrinking while remaining capable of contracting securely around the intended surface. Correct sizing, uniform heating and appropriate installation conditions help achieve a consistent protective finish.
Tick the specs you need, then view products that match.
| Adhesive Lined | No | |
|---|---|---|
| Material | Polyolefin | |
| Cable Diameter (mm) | 6.3–12.7 mm | |
| Internal Diameter Before Shrinking (mm) | 12.7 mm | |
| Shrink Ratio | 2:1 | |
| Device Type | Heat-shrink tubing | |
| Manufacturer | Partex | |
| Series | 2:1 Heat Shrink Tubing | |
| Model / Part number | HSKIT112.7 | |
| Product type | Heat shrink tubing kit | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 12.7 mm | |
| Nominal recovered diameter | 6.3 mm | |
| Supply format | Kit | |
| Installation method | Heat shrinking | |
| Primary functions | Electrical insulation, cable protection and wiring organisation | |
| Typical applications | Cable assemblies, electrical connections, wiring harnesses and industrial wiring | |
| HS Code | 39269097 |
The Partex HSKIT112.7 is a heat shrink tubing kit used for electrical insulation, cable protection and wiring organisation in electrical installation, maintenance and cable assembly applications.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original diameter when correctly heated under suitable conditions.
The tubing has a nominal supplied diameter of 12.7 mm and a nominal recovered diameter of 6.3 mm.
Yes. The Partex HSKIT112.7 is supplied in a kit format for convenient use in electrical installation, cable protection and maintenance applications.
The tubing is suitable for electrical wiring, cable joints, wiring harnesses, control panel assemblies and general cable protection, provided its dimensions and properties are appropriate for the installation.
Partex cable identification and protection products support organised, professional electrical installations. The HSKIT112.7 heat shrink tubing kit combines a practical 2:1 shrink ratio, 12.7 mm nominal supplied diameter and convenient kit format for electrical insulation, cable protection and maintenance applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.