Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HSDW3-9 Partex adhesive-lined 3:1 heat shrink, 9/3mm, pack Length
Partex HSDW3-9 black adhesive-lined 3:1 dual-wall heat shrink tubing, supplied in a 1.2 m length with a 9 mm supplied diameter and 3 mm recovered diameter, designed for electrical insulation, moisture-resistant cable joint sealing and industrial cable protection.
£1.66
Why Choose the Partex HSDW3-9 Adhesive-Lined 3:1 Heat Shrink Tubing?
The Partex HSDW3-9 is a durable adhesive-lined 3:1 heat shrink tubing designed to provide electrical insulation, cable protection and environmental sealing for electrical connections and cable assemblies. Featuring a dual-wall construction with an outer heat-shrinkable sleeve and an internal adhesive lining, this tubing is particularly suitable for installations requiring additional protection against moisture, dust and mechanical wear.
As part of the Partex HSDW3 dual-wall heat shrink tubing range, the HSDW3-9 features a 3:1 shrink ratio, allowing its nominal internal diameter to reduce from 9 mm to 3 mm when fully recovered. During heating, the outer sleeve contracts around the cable or component while the internal adhesive softens and flows to help create a secure seal.
The Partex HSDW3-9 is ideal for electrical contractors, maintenance engineers, control panel builders and industrial manufacturers requiring dependable insulation and sealing of cable joints, connectors and terminations. Its adhesive-lined construction makes it particularly useful in applications where standard single-wall heat shrink tubing may not provide sufficient environmental protection.
Key Advantages
- High-quality 3:1 adhesive-lined heat shrink tubing for electrical insulation and cable protection.
- 9 mm nominal supplied diameter reducing to approximately 3 mm after full recovery.
- Dual-wall construction combines an outer protective sleeve with an internal adhesive lining.
- Heat-activated adhesive helps seal cable connections against moisture and contaminants.
- Wide shrink ratio accommodates variations in cable and connector diameters.
- Provides additional mechanical protection for cable joints and terminations.
- Helps reduce the risk of moisture entering properly sealed electrical connections.
- Suitable for industrial electrical installations, cable repairs and wiring harnesses.
- Can be cut to the required length for individual installation requirements.
Key Features
- Partex HSDW3 adhesive-lined heat shrink tubing series.
- 3:1 nominal shrink ratio for flexible installation over cable joints and connectors.
- 9 mm nominal internal diameter before shrinking.
- 3 mm nominal recovered internal diameter.
- Dual-wall construction with heat-shrinkable outer material and internal adhesive.
- Heat-activated adhesive lining for environmental sealing.
- Helps protect cable connections against moisture, dust and mechanical abrasion.
- Provides electrical insulation around suitable cable joints and terminations.
- Heat-activated recovery using suitable hot-air equipment.
- Suitable for cutting into customised lengths before installation.
- Designed for cable joint protection, connector sealing and electrical maintenance.
Reliable Adhesive-Lined Cable Protection and Environmental Sealing
The Partex HSDW3-9 adhesive-lined heat shrink tubing provides an effective solution for protecting electrical connections against moisture, dust and mechanical wear. Unlike standard single-wall heat shrink tubing, its dual-wall construction incorporates an internal adhesive layer that softens during heating and helps fill small gaps between the tubing and the underlying cable or component.
Its 3:1 shrink ratio allows the tubing to accommodate cable joints and connectors with varying diameters. This is particularly beneficial when covering electrical splices, cable terminations and irregularly shaped connections where a close-fitting protective sleeve is required. The tubing can be cut to the desired length before installation, helping engineers and installers produce consistent, professional cable assemblies.
When installed correctly, the combination of the outer heat-shrinkable sleeve and internal adhesive helps form an effective environmental barrier around the protected connection. The tubing is suitable for applications where additional moisture resistance is required, although the sealing performance depends on correct installation, compatible cable surfaces and the suitability of the complete assembly for its operating environment.
Typical Applications
- Electrical cable joint insulation and environmental sealing.
- Protection of wire splices and electrical connections.
- Moisture-resistant cable termination protection.
- Industrial control panel wiring and cable assemblies.
- Electrical maintenance and cable repair applications.
- Protection of wiring harnesses and connector transitions.
- Industrial automation and machine wiring installations.
- Outdoor electrical connections requiring suitable additional sealing.
- Electrical equipment manufacturing and assembly.
- OEM machinery manufacturing and industrial engineering projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Adhesive Lined | Yes | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 3–9 mm | |
| Internal Diameter Before Shrinking (mm) | 9 mm | |
| Shrink Ratio | 3:1 | |
| Manufacturer | Partex | |
| Series | HSDW3 Adhesive-Lined Heat Shrink Tubing | |
| Model | HSDW3-9 | |
| Product type | Adhesive-lined heat shrink tubing | |
| Construction | Dual-wall | |
| Inner lining | Heat-activated adhesive | |
| Shrink ratio | 3:1 | |
| Nominal supplied internal diameter | 9 mm | |
| Nominal recovered internal diameter | 3 mm | |
| Installation method | Heat shrinking using suitable hot-air equipment | |
| Primary function | Electrical insulation and environmental sealing | |
| Secondary function | Cable joint protection and mechanical reinforcement | |
| Typical installation | Cable joints, wire splices, connectors and electrical terminations | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HSDW3-9 adhesive-lined heat shrink tubing used for?
The Partex HSDW3-9 is used for electrical insulation, cable joint protection and environmental sealing of wire splices, connectors and cable terminations. Its internal adhesive lining helps protect properly sealed connections against moisture and contaminants.
What is the shrink ratio of the Partex HSDW3-9?
The tubing has a 3:1 shrink ratio, meaning its nominal internal diameter reduces from 9 mm to approximately 3 mm when fully recovered.
What is the advantage of adhesive-lined heat shrink tubing?
Adhesive-lined heat shrink tubing contains an internal adhesive layer that softens during heating and helps seal the tubing against the underlying cable or component. This provides additional protection against moisture, dust and environmental contaminants compared with standard non-adhesive tubing.
Is the Partex HSDW3-9 suitable for waterproof cable connections?
The dual-wall adhesive-lined construction helps create a moisture-resistant seal when installed correctly. However, suitability for waterproof or submerged applications depends on the complete cable assembly, installation conditions and any required ingress protection rating.
How is the Partex HSDW3-9 installed?
Cut the tubing to the required length, position it over the cable joint or connector and apply controlled heat using a suitable hot-air heat gun. Continue heating evenly until the outer sleeve contracts and the internal adhesive flows to form a seal. Allow the assembly to cool before handling or applying mechanical stress.
Trusted by Electrical and Industrial Professionals Worldwide
Partex adhesive-lined heat shrink tubing provides a practical solution for electrical insulation, cable joint protection and environmental sealing. The HSDW3-9 combines a versatile 3:1 shrink ratio, dual-wall construction and heat-activated adhesive lining to support reliable cable protection in electrical engineering, industrial maintenance and automation applications.
