Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HSDW3-4.8 Partex adhesive-lined 3:1 heat shrink, 4.8/1.6mm, pack Length
Partex HSDW3-4.8 adhesive-lined dual-wall heat shrink tubing with a 3:1 shrink ratio, 4.8 mm supplied internal diameter and 1.6 mm nominal recovered diameter, designed for electrical insulation, moisture-resistant cable sealing and connection protection.
£1.21
Why Choose the Partex HSDW3-4.8 Adhesive-Lined Heat Shrink Tubing?
The Partex HSDW3-4.8 is a versatile 3:1 adhesive-lined heat shrink tubing designed to provide electrical insulation, moisture protection and mechanical protection for wires, cables and electrical connections. As part of the Partex HSDW3 dual-wall heat shrink tubing range, it combines a heat-shrinkable outer sleeve with an internal adhesive lining to create a secure protective covering around compatible electrical components.
Featuring a nominal supplied internal diameter of 4.8 mm and a nominal fully recovered diameter of 1.6 mm, this tubing offers a 3:1 shrink ratio that accommodates a range of cable and connection sizes. When heated correctly, the outer tubing contracts while the internal adhesive softens and flows around the underlying surface, helping form a moisture-resistant seal.
The HSDW3-4.8 is particularly suitable for electrical installations where conventional single-wall heat shrink tubing may not provide sufficient environmental protection. Its dual-wall construction makes it a practical choice for cable splices, wiring harnesses, electrical terminals and industrial maintenance applications requiring additional insulation and sealing.
Key Advantages
- 3:1 heat shrink ratio accommodates a wider range of cable and component diameters.
- Adhesive-lined dual-wall construction provides insulation and additional environmental protection.
- 4.8 mm supplied diameter suitable for smaller electrical cables and connections.
- 1.6 mm nominal recovered diameter enables close-fitting protective sleeving.
- Internal heat-activated adhesive helps create a moisture-resistant seal around compatible surfaces.
- Provides additional protection against abrasion, contamination and mechanical wear.
- Suitable for industrial electrical installations, cable assembly and maintenance applications.
Key Features
- Partex HSDW3 adhesive-lined heat shrink tubing series.
- 3:1 shrink ratio for flexible cable and connection coverage.
- 4.8 mm nominal supplied internal diameter.
- 1.6 mm nominal fully recovered internal diameter.
- Dual-wall construction with heat-shrinkable outer tubing and internal adhesive lining.
- Heat-activated adhesive helps seal around cable insulation and electrical connections.
- Provides electrical insulation and additional mechanical protection.
- Suitable for cable splices, terminals and wiring harnesses.
- Can be cut to the required length for individual installation requirements.
Reliable Moisture Protection and Electrical Cable Sealing
Adhesive-lined heat shrink tubing provides additional protection compared with conventional single-wall sleeving by combining heat shrink technology with an internal sealing adhesive. During installation, suitable heat causes the outer sleeve to contract while the adhesive softens and flows around the cable or component, helping reduce moisture ingress and contamination.
The Partex HSDW3-4.8 is designed for applications requiring both insulation and sealing around smaller cables and electrical connections. Its 3:1 shrink ratio enables the tubing to accommodate variations in cable diameter and connection geometry, making it useful for protecting wire joints, cable transitions and electrical terminations.
For best results, the tubing should be selected to suit the diameter of the cable and the largest component it must pass over. Correct heating, suitable surface preparation and compatible cable materials are important for achieving effective adhesive bonding and environmental protection.
Typical Applications
- Electrical cable splices and wire joint insulation.
- Moisture-resistant protection of compatible electrical connections.
- Industrial wiring harnesses and cable assemblies.
- Electrical terminals and cable termination protection.
- Control panel wiring and automation equipment.
- Automotive and machinery electrical maintenance.
- Cable repairs and protective sleeving in suitable industrial environments.
Technical Specifications
Tick the specs you need, then view products that match.
| Adhesive Lined | Yes | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 1.6–4.8 mm | |
| Internal Diameter Before Shrinking (mm) | 4.8 mm | |
| Shrink Ratio | 3:1 | |
| Manufacturer | Partex | |
| Series | HSDW3 Adhesive-Lined Heat Shrink Tubing | |
| Model / Part number | HSDW3-4.8 | |
| Product type | Adhesive-lined heat shrink tubing | |
| Construction | Dual-wall | |
| Shrink ratio | 3:1 | |
| Nominal supplied internal diameter | 4.8 mm | |
| Nominal fully recovered internal diameter | 1.6 mm | |
| Adhesive lining | Heat-activated internal adhesive | |
| Installation method | Heat shrinking | |
| Primary functions | Electrical insulation, moisture resistance and mechanical protection | |
| Typical applications | Cable splices, electrical connections, wiring harnesses and industrial wiring | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HSDW3-4.8 used for?
The Partex HSDW3-4.8 is used for electrical insulation, cable sealing and moisture-resistant protection of wires, cable joints and electrical connections.
What does the 3:1 shrink ratio mean?
A 3:1 shrink ratio means the tubing can reduce to approximately one-third of its original internal diameter when correctly heated under suitable conditions.
What are the diameters of this adhesive-lined heat shrink tubing?
The tubing has a nominal supplied internal diameter of 4.8 mm and a nominal fully recovered internal diameter of 1.6 mm.
What is the purpose of the adhesive lining?
The heat-activated internal adhesive softens during installation and helps create a moisture-resistant seal around compatible cables and electrical connections.
What is the difference between adhesive-lined and standard heat shrink tubing?
Standard heat shrink tubing primarily provides insulation and mechanical protection, while adhesive-lined dual-wall tubing adds an internal sealing layer to help protect electrical connections against moisture and contamination.
Trusted Cable Protection and Identification from Partex
Partex cable protection products are designed to support professional electrical installations and dependable cable management. The HSDW3-4.8 adhesive-lined 3:1 heat shrink tubing combines flexible diameter reduction, dual-wall construction and heat-activated adhesive sealing for protecting electrical connections, wiring harnesses and cable assemblies.
