Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HS295WHITE Partex 2:1 heat shrink tubing, 9.5/4.7mm, white, pack 75m
Partex HS295WHITE is white 2:1 heat shrink tubing with a nominal supplied internal diameter of 9.5 mm and recovered diameter of 4.7 mm, supplied in 75 m packs for electrical insulation, cable protection and conductor identification.
£48.40
Why Choose the Partex HS295WHITE 2:1 Heat Shrink Tubing?
The Partex HS295WHITE is a versatile 2:1 heat shrink tubing designed for electrical insulation, cable protection, conductor identification and professional cable management applications. Featuring a clean white finish and heat-activated shrinking properties, this tubing provides a practical solution for insulating, protecting and organising electrical conductors in industrial, commercial and general electrical installations.
As part of the Partex HS2 heat shrink tubing range, the HS295WHITE contracts when heated, forming a close-fitting sleeve around compatible wires, cables and components. Its 2:1 nominal shrink ratio allows the tubing to recover to approximately half its original internal diameter, providing flexibility when selecting protective sleeves for different conductor sizes and electrical assemblies.
With a nominal supplied internal diameter of 9.5 mm and a nominal recovered internal diameter of 4.7 mm, the HS295WHITE is particularly suitable for compatible electrical conductors, cable assemblies and colour-coded wiring identification applications. Supplied in a convenient 75 m pack, it is ideal for electrical panel builders, cable harness manufacturers, maintenance engineers and industrial production environments requiring white heat shrink tubing.
Key Advantages
- 2:1 heat shrink ratio allows the tubing to contract to approximately half its supplied internal diameter.
- 9.5 mm supplied diameter accommodates compatible electrical conductors, cable assemblies and insulated connections.
- 4.7 mm recovered diameter provides a close-fitting sleeve when correctly applied.
- White colour supports visual cable identification, conductor differentiation and organised wiring installations.
- Electrical insulation and mechanical protection help protect compatible conductors and cable components.
- Heat-activated installation provides a neat, conforming finish without mechanical fasteners.
- Cut-to-length flexibility allows individual sleeves to be prepared for different installation requirements.
- 75 m pack quantity provides a practical supply for installation, manufacturing and maintenance tasks.
Key Features
- Partex HS295WHITE heat shrink tubing.
- 2:1 nominal shrink ratio.
- 9.5 mm nominal supplied internal diameter.
- 4.7 mm nominal recovered internal diameter.
- White finish for cable identification and visual differentiation.
- Heat-activated shrinking for a close-fitting installation.
- Suitable for insulating and protecting compatible electrical conductors.
- Flexible tubing can be cut into individual sleeves.
- Suitable for installation using an appropriate hot air heat gun.
- Useful for electrical, industrial and general-purpose cable protection applications.
- Supplied in a 75 m pack.
Reliable Electrical Insulation and Cable Identification
The Partex HS295WHITE provides an effective method of insulating and protecting electrical conductors while supporting clear cable identification. When suitable heat is applied, the tubing contracts around the cable or component, creating a close-fitting sleeve that helps protect the underlying surface against incidental abrasion and contact. Its flexible format makes it suitable for cable preparation, electrical assembly and maintenance work where a protective covering is required.
The 2:1 shrink ratio offers flexibility when working with different conductor diameters, while the clean white finish helps installers visually distinguish wiring groups and cable identification categories within electrical control panels and cable harnesses. White tubing is particularly useful in installations where a neutral, professional appearance is preferred or where cable identification follows a defined colour-coding scheme.
The 75 m pack is particularly useful for repetitive cable preparation, electrical manufacturing and maintenance applications where tubing is cut to individual lengths as required. Its 9.5 mm supplied diameter makes it a practical choice for compatible cable assemblies, wiring branches and electrical components requiring a neat protective sleeve. The tubing should be selected according to the outside diameter of the component and the required recovered fit.
Typical Applications
- Electrical wire insulation and conductor protection.
- Colour-coded cable identification and wiring organisation.
- Electrical control panel assembly and cable preparation.
- Cable harness manufacturing and wire loom organisation.
- Insulation of compatible electrical joints and connections.
- Industrial machinery and automation wiring.
- Electronics assembly and low-voltage electrical installations.
- Identification of wiring groups in control and instrumentation systems.
- Protection of compatible cable branches and wiring assemblies.
- Electrical equipment servicing and maintenance.
- Professional finishing of cable assemblies and wiring terminations.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 75 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 4.7–9.5 mm | |
| Internal Diameter Before Shrinking (mm) | 9.5 mm | |
| Shrink Ratio | 2:1 | |
| Colour | White | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | HS2 Heat Shrink Tubing | |
| Model | HS295WHITE | |
| Product type | Heat shrink tubing | |
| Nominal shrink ratio | 2:1 | |
| Supplied internal diameter | 9.5 mm | |
| Recovered internal diameter | 4.7 mm | |
| Colour | White | |
| Shrinking method | Heat activated | |
| Application | Electrical insulation, cable protection and conductor identification | |
| Installation method | Apply controlled heat using a suitable heat gun | |
| Pack quantity | 75 m | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HS295WHITE used for?
The HS295WHITE is 2:1 heat shrink tubing designed for electrical insulation, wire protection and cable identification, particularly on compatible electrical conductors, cable assemblies and wiring connections.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can recover to approximately half its original internal diameter when suitable heat is applied. The HS295WHITE has a nominal supplied diameter of 9.5 mm and a nominal recovered diameter of 4.7 mm.
What are the supplied and recovered diameters of the HS295WHITE?
The Partex HS295WHITE has a nominal supplied internal diameter of 9.5 mm and a nominal recovered internal diameter of 4.7 mm. The tubing should be selected so that it fits over the component before heating and can shrink sufficiently to grip it afterwards.
How is the Partex HS295WHITE installed?
Cut the tubing to the required length, position it over the cable or component and apply controlled heat using a suitable heat gun until the tubing shrinks evenly around the surface. Follow the manufacturer's installation guidance and avoid overheating the tubing or underlying cable insulation.
How much heat shrink tubing is supplied in a pack?
Each pack contains 75 m of white Partex HS295WHITE heat shrink tubing, suitable for electrical installation, cable preparation and industrial production applications.
Trusted Cable Identification and Protection Solutions
Partex supplies cable identification, marking and protection products for electrical installers, panel builders and industrial maintenance professionals. The HS295WHITE 2:1 heat shrink tubing combines practical sizing, a clean white finish and heat-activated shrinking to support organised, insulated and professionally finished wiring assemblies.
