Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HS2762GREEN Partex 2:1 heat shrink tubing, 76.2/38.1mm, green, pack 15m
Partex HS2762GREEN green 2:1 heat shrink tubing with a 76.2 mm supplied diameter, 38.1 mm nominal recovered diameter and 15 m pack length for electrical insulation, cable protection and colour-coded conductor identification.
£199.10
Why Choose the Partex HS2762GREEN 2:1 Green Heat Shrink Tubing?
The Partex HS2762GREEN is a versatile green heat shrink tubing designed for electrical insulation, cable protection and identification of wires, cable joints and electrical connections. Featuring a 2:1 shrink ratio, this tubing contracts when heated to provide a close-fitting protective sleeve around compatible cables, conductors and electrical components.
Designed for professional cable management and electrical installation applications, Partex heat shrink tubing is suitable for industrial control panels, electrical assemblies, machinery wiring and maintenance work. Its distinctive green colour provides clear visual identification, making it particularly useful for colour-coded wiring systems and applications where cables or conductor groups need to be easily distinguished.
With a nominal supplied diameter of 76.2 mm, a recovered diameter of approximately 38.1 mm and a 15 m pack length, the HS2762GREEN provides a practical solution for larger cable assemblies, electrical terminations, wire harnesses and industrial wiring applications requiring a protective heat shrink covering.
Key Advantages
- 2:1 heat shrink ratio provides a close-fitting protective covering when correctly heated.
- 76.2 mm supplied diameter suitable for larger cables, wiring assemblies and compatible electrical connections.
- Approximately 38.1 mm recovered diameter enables a secure fit around appropriately sized components.
- Green colour supports visual identification and colour-coded cable management.
- 15 m pack length suitable for electrical installation, workshop and production applications.
- Helps provide electrical insulation and protection against everyday handling and abrasion.
- Heat-activated installation provides a neat, professional finish without additional fastening components.
Key Features
- Partex HS2762GREEN heat shrink tubing.
- 2:1 nominal shrink ratio.
- 76.2 mm nominal diameter before shrinking.
- 38.1 mm nominal diameter after shrinking.
- Green colour for cable identification and colour-coded electrical installations.
- 15 m supplied length.
- Heat-activated shrinkage for close-fitting cable protection.
- Suitable for electrical insulation, cable identification and wire harness applications.
- Large nominal diameter accommodates appropriately sized cable bundles and electrical assemblies.
- Practical for industrial control panels, machinery wiring and electrical maintenance.
Reliable Cable Insulation and Identification for Industrial Electrical Systems
Heat shrink tubing provides a convenient method of insulating and protecting electrical cables by contracting around conductors and components when heat is applied. The Partex HS2762GREEN features a nominal 2:1 shrink ratio, allowing the tubing to reduce from approximately 76.2 mm to 38.1 mm in diameter when fully recovered. This makes it suitable for covering appropriately sized cable joints, larger wiring assemblies and electrical terminations.
The green finish is particularly useful in industrial automation systems, electrical control panels and equipment wiring where colour coding helps maintenance personnel identify designated cables and circuits. The tubing can help protect cable insulation and connection areas while supporting organised cable management. Green-only tubing should not be used as a substitute for the green/yellow identification reserved for protective earth conductors where applicable wiring standards require it. For best results, the tubing should be selected according to the dimensions of the cable or component and installed using a suitable controlled heat source.
Typical Applications
- Electrical cable insulation and connection protection.
- Industrial control panel wiring and cable management.
- Colour-coded cable and conductor identification.
- Larger cable joints and electrical termination coverings.
- Wire harness assembly and cable bundling.
- Industrial machinery and automation wiring.
- Electrical distribution and switchgear assemblies.
- Electrical maintenance, repair and installation work.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 15 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 38.1–76.2 mm | |
| Internal Diameter Before Shrinking (mm) | 76.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model | HS2762GREEN | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 76.2 mm | |
| Nominal recovered diameter | 38.1 mm | |
| Colour | Green | |
| Pack length | 15 m | |
| Installation method | Heat shrinking | |
| Identification application | Colour-coded cable and conductor identification | |
| Primary function | Electrical insulation, cable identification and protection | |
| Typical installation | Larger cable assemblies, electrical connections and wire harnesses | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HS2762GREEN used for?
The HS2762GREEN is used for electrical insulation, cable protection and colour-coded conductor identification in electrical installations, industrial control panels and machinery wiring applications.
What is the shrink ratio of this tubing?
The tubing has a 2:1 shrink ratio, meaning its nominal diameter can reduce to approximately half its original size when correctly heated.
What are the supplied and recovered diameters?
The tubing has a nominal supplied diameter of 76.2 mm and a nominal recovered diameter of 38.1 mm.
Is this green heat shrink tubing suitable for larger cable assemblies?
Yes. The 76.2 mm supplied diameter makes the HS2762GREEN suitable for covering larger cables, cable joints and wiring assemblies, provided the component dimensions are compatible with the tubing's shrink range.
How much heat shrink tubing is supplied?
The Partex HS2762GREEN is supplied in a 15 m pack, providing material for multiple electrical installation, cable identification and protection tasks.
Trusted by Electrical Installers and Industrial Professionals
Partex cable identification and protection products support professional electrical installation, industrial automation and control panel assembly. The HS2762GREEN green heat shrink tubing provides a practical solution for cable insulation, colour-coded identification and organised electrical wiring installations in industrial and commercial environments.
