Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HS2508WHITE white 2:1 heat shrink tubing with a 50.8 mm supplied diameter, 25.4 mm recovered diameter and 30 m pack length, designed for electrical insulation, visual identification and mechanical protection of larger cables and industrial wiring assemblies.
£214.14
The Partex HS2508WHITE is a professional 2:1 white heat shrink tubing designed for electrical insulation, cable identification and mechanical protection of larger electrical cables, conductor bundles and wiring assemblies. Featuring a nominal supplied diameter of 50.8 mm and a nominal recovered diameter of 25.4 mm, this heat shrink sleeving provides a practical solution for protecting, organising and finishing larger cable installations in industrial and commercial electrical environments.
Part of the Partex heat shrink tubing range, HS2508WHITE uses heat-activated radial contraction to form a close-fitting protective sleeve around appropriately sized cables and components. The tubing helps protect covered wiring against abrasion, rubbing and routine handling damage while producing a neat, professional finish. Its distinctive white colour supports visual cable identification, colour-coded wiring organisation and a clean appearance in electrical panels, equipment assemblies and cable harnesses.
With a 2:1 nominal shrink ratio, the tubing can contract from its supplied diameter of 50.8 mm towards a recovered diameter of 25.4 mm when heated correctly. Supplied in a convenient 30 m pack, Partex HS2508WHITE is suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring cut-to-length protective sleeving for larger cable assemblies.
The Partex HS2508WHITE provides a convenient solution for protecting larger electrical cables, conductor bundles and connections that require a substantial sleeve opening. Its nominal 50.8 mm supplied diameter allows the tubing to be positioned over appropriately sized cable assemblies, wiring transitions and components before heat is applied. Once heated correctly, the tubing contracts around the assembly to create a close-fitting protective covering.
The 2:1 shrink ratio offers flexibility when selecting tubing for cable assemblies with variations in diameter. The nominal recovered diameter of 25.4 mm allows the tubing to reduce to approximately half its original diameter, helping installers achieve a tidy and consistent finish. Correct sizing is essential: the tubing must fit over the largest part of the assembly before shrinking and recover sufficiently to grip the intended surface.
Its white finish makes HS2508WHITE useful for colour-coded cable management, visual identification and distinguishing selected wiring groups. White sleeving can provide a clean appearance in equipment assemblies and may be incorporated into application-specific cable identification schemes. Where electrical conductor identification is required, installers must follow the applicable wiring standards and ensure that the sleeving does not obscure mandatory conductor markings.
The 30 m pack is convenient for panel-building workshops, electrical assembly operations and maintenance departments that regularly prepare protective cable sleeving. Installers can cut the required length, position it over the conductor or cable assembly and apply controlled heat using an appropriate heat gun. For applications requiring moisture sealing, a specifically rated adhesive-lined or sealing product should be selected rather than assuming standard heat shrink tubing provides a watertight seal.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 25.4–50.8 mm | |
| Internal Diameter Before Shrinking (mm) | 50.8 mm | |
| Shrink Ratio | 2:1 | |
| Colour | White | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | 2:1 Heat Shrink Tubing | |
| Manufacturer part number | HS2508WHITE | |
| Product type | Heat shrink tubing / electrical insulation sleeving | |
| Nominal shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 50.8 mm | |
| Nominal diameter after recovery | 25.4 mm | |
| Colour | White | |
| Pack length | 30 m | |
| Shrinking method | Controlled application of heat | |
| Primary functions | Cable insulation, mechanical protection and visual identification | |
| Installation | Cut to length, position over the cable and apply heat evenly | |
| Typical installation environments | Control panels, electrical assemblies, machinery and cable harnesses | |
| HS Code | 39269097 |
The Partex HS2508WHITE is used for electrical insulation, mechanical protection and visual identification of appropriately sized larger cables, conductor bundles and electrical connections. It is suitable for industrial control panels, machinery wiring, electrical assemblies and cable harnesses.
A 2:1 shrink ratio means the tubing can contract to approximately half its original nominal diameter when fully recovered under suitable heating conditions. This allows it to fit closely around appropriately sized cables and components.
The tubing has a nominal supplied diameter of 50.8 mm and a nominal fully recovered diameter of 25.4 mm. The cable or component must fit inside the tubing before shrinking, and the tubing must be capable of recovering sufficiently around the finished assembly.
Partex HS2508WHITE is supplied in a 30 m pack. The tubing can be cut into shorter sections to suit individual cable insulation, identification and protection requirements.
Yes. The white colour can support visual cable identification and distinguish selected wiring groups where appropriate to the installation's identification scheme. However, conductor colours must comply with the applicable electrical standards, and white sleeving should not replace mandatory conductor identification.
Yes. The 50.8 mm nominal supplied diameter makes HS2508WHITE suitable for appropriately sized larger cable bundles and conductor assemblies. The tubing can recover towards a nominal diameter of 25.4 mm, so the final cable diameter must be considered to ensure a suitable fit.
The tubing provides protective sleeving around suitable cables and connections, but waterproof or moisture-sealing performance should not be assumed without a confirmed product rating. Where environmental sealing is required, select a heat shrink product specifically designed and rated for that purpose.
Cut the tubing to the required length, slide it over the cable or suitable electrical connection and apply controlled, even heat using an appropriate heat gun. Continue heating until the tubing has contracted around the assembly, then allow it to cool before handling. Ensure the cable is safely isolated and the tubing is correctly sized for the intended application.
Partex heat shrink tubing offers electrical contractors, panel builders, OEM manufacturers and industrial maintenance teams a practical solution for cable protection, insulation, identification and professional wiring finishes. The HS2508WHITE variant combines a nominal 50.8 mm supplied diameter, 25.4 mm recovered diameter, 2:1 shrink ratio and convenient 30 m pack length for efficient preparation and protection of larger cable assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.