Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HS2508GREY is grey 2:1 heat shrink tubing with a 50.8 mm supplied diameter, 25.4 mm recovered diameter and 30 m pack length, designed for electrical insulation, cable protection and protective cable sleeving.
£214.14
The Partex HS2508GREY is a versatile 2:1 heat shrink tubing designed for electrical insulation, cable protection and protective sleeving in industrial and commercial electrical installations. Featuring a professional grey finish, this tubing has a nominal supplied diameter of 50.8 mm and a nominal recovered diameter of 25.4 mm, making it suitable for appropriately sized larger electrical cables, conductor assemblies and wiring connections.
As part of the Partex heat shrink tubing range, the HS2508GREY provides a practical solution for protecting and organising electrical wiring. When suitable heat is applied, the tubing contracts around the underlying cable or component, forming a close-fitting protective sleeve that supports electrical insulation and provides a neat, professional finish. Its grey colour offers a neutral appearance for electrical assemblies and can support visual cable identification within appropriately designed wiring systems.
Supplied in a convenient 30 m pack, the HS2508GREY is suitable for electrical panel builders, cable harness manufacturers, maintenance engineers and industrial installers. Its 2:1 shrink ratio provides installation flexibility, while the 50.8/25.4 mm diameter specification makes it particularly useful for larger cable sleeving applications requiring protective insulation and organised wiring.
Heat shrink tubing provides a convenient method of insulating and protecting electrical cables, conductor assemblies and wiring connections. The Partex HS2508GREY contracts when suitable heat is applied, allowing it to conform to compatible cable diameters and create a neat protective covering. Its 2:1 shrink ratio enables substantial diameter reduction, with a specified nominal recovered diameter of 25.4 mm.
The grey finish makes this tubing particularly useful for electrical installations where a neutral appearance, consistent cable sleeving and organised wiring are important. Its larger supplied diameter provides installation flexibility for compatible cable assemblies and electrical components. For effective results, select tubing with a supplied diameter large enough to pass over the cable or component and a recovered diameter suitable for a close fit. Follow the manufacturer's recommended heating procedure and confirm suitability for the electrical and environmental conditions of the application.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 25.4–50.8 mm | |
| Internal Diameter Before Shrinking (mm) | 50.8 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Grey | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | Heat Shrink Tubing | |
| Model | HS2508GREY | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 50.8 mm | |
| Nominal recovered diameter | 25.4 mm | |
| Colour | Grey | |
| Pack length | 30 m | |
| Activation method | Heat shrinking | |
| Application | Electrical insulation, cable sleeving, cable protection and wiring organisation | |
| HS Code | 39269097 |
The Partex HS2508GREY is designed for electrical insulation, cable protection and protective sleeving on compatible larger electrical cables, conductor assemblies and wiring connections.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original nominal diameter when fully recovered under appropriate heating conditions.
The HS2508GREY has a nominal supplied diameter of 50.8 mm and a nominal recovered diameter of 25.4 mm.
The tubing is supplied in grey, making it suitable for electrical wiring applications requiring a neutral, consistent appearance and organised protective cable sleeving.
Each pack contains 30 m of Partex grey 2:1 heat shrink tubing, suitable for multiple cable insulation and protective sleeving tasks.
Yes. The HS2508GREY can be used for compatible cable insulation, protective sleeving and cable organisation within electrical control panels and industrial equipment, subject to applicable installation requirements.
Yes. The tubing can be cut to the required length before heating, allowing installers to prepare individual protective sleeves for specific cables, conductor assemblies and electrical components.
Choose tubing with a supplied diameter large enough to pass over the cable or component before heating and a recovered diameter small enough to provide a secure fit. For the HS2508GREY, the nominal supplied and recovered diameters are 50.8 mm and 25.4 mm, respectively.
Yes. Grey tubing can help visually distinguish cables within an appropriately designed identification system. However, conductor colours must comply with the applicable electrical installation requirements, and grey sleeving should not replace mandatory protective conductor identification.
Partex cable identification and protection products support professional electrical installation, industrial wiring and control panel assembly. The HS2508GREY 2:1 heat shrink tubing provides a practical solution for larger cable insulation, protective sleeving and organised electrical wiring in industrial and commercial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.