Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HS2508GREEN is green 2:1 heat shrink tubing with a 50.8 mm supplied diameter, 25.4 mm recovered diameter and 30 m pack length, designed for electrical insulation, cable protection and protective cable sleeving.
£214.14
The Partex HS2508GREEN is a versatile 2:1 heat shrink tubing designed for electrical insulation, cable protection and conductor identification in industrial and commercial electrical installations. Featuring a distinctive green finish, this tubing has a nominal supplied diameter of 50.8 mm and a nominal recovered diameter of 25.4 mm, making it suitable for appropriately sized larger electrical cables, cable assemblies and wiring connections.
As part of the Partex heat shrink tubing range, the HS2508GREEN provides a practical solution for protecting and organising electrical wiring. When suitable heat is applied, the tubing contracts around the underlying cable or component, forming a close-fitting protective sleeve that supports electrical insulation and provides a neat, professional finish. Its green colour also allows visual differentiation of cables within appropriately designed identification systems.
Supplied in a convenient 30 m pack, the HS2508GREEN is suitable for electrical panel builders, cable harness manufacturers, maintenance engineers and industrial installers. Its 2:1 shrink ratio provides installation flexibility, while the 50.8/25.4 mm diameter specification makes it particularly useful for larger cable sleeving applications requiring protective insulation and organised wiring.
Heat shrink tubing provides a convenient method of insulating and protecting electrical cables, conductor assemblies and wiring connections. The Partex HS2508GREEN contracts when suitable heat is applied, allowing it to conform to compatible cable diameters and create a neat protective covering. Its 2:1 shrink ratio enables substantial diameter reduction, with a specified nominal recovered diameter of 25.4 mm.
The green finish makes this tubing useful for electrical installations where visual cable differentiation, organised wiring and consistent protective sleeving are important. However, plain green tubing must not be assumed to provide the required green/yellow identification for protective earth conductors under applicable UK wiring requirements. For effective installation, select tubing with a supplied diameter large enough to pass over the cable or component and a recovered diameter suitable for a close fit. Follow the manufacturer's recommended heating procedure and confirm suitability for the electrical and environmental conditions of the application.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 25.4–50.8 mm | |
| Internal Diameter Before Shrinking (mm) | 50.8 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | Heat Shrink Tubing | |
| Model | HS2508GREEN | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 50.8 mm | |
| Nominal recovered diameter | 25.4 mm | |
| Colour | Green | |
| Pack length | 30 m | |
| Activation method | Heat shrinking | |
| Application | Electrical insulation, cable sleeving, cable protection and visual cable identification | |
| HS Code | 39269097 |
The Partex HS2508GREEN is designed for electrical insulation, cable protection and protective sleeving on compatible larger electrical cables, conductor assemblies and wiring connections.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original nominal diameter when fully recovered under appropriate heating conditions.
The HS2508GREEN has a nominal supplied diameter of 50.8 mm and a nominal recovered diameter of 25.4 mm.
The tubing is supplied in green, making it suitable for applications requiring green cable sleeving or visual cable differentiation within an appropriate identification system.
Each pack contains 30 m of Partex green 2:1 heat shrink tubing, suitable for multiple cable insulation and protective sleeving tasks.
Plain green tubing should not be used as a substitute for the required green/yellow protective earth conductor identification under applicable UK electrical wiring requirements. Select the appropriate green/yellow sleeving where protective conductor marking is required.
Yes. The HS2508GREEN can be used for compatible cable insulation, protective sleeving and cable organisation within electrical control panels and industrial equipment, subject to applicable installation requirements.
Yes. The tubing can be cut to the required length before heating, allowing installers to prepare individual protective sleeves for specific cables, conductor assemblies and electrical components.
Choose tubing with a supplied diameter large enough to pass over the cable or component before heating and a recovered diameter small enough to provide a secure fit. For the HS2508GREEN, the nominal supplied and recovered diameters are 50.8 mm and 25.4 mm, respectively.
Partex cable identification and protection products support professional electrical installation, industrial wiring and control panel assembly. The HS2508GREEN 2:1 heat shrink tubing provides a practical solution for larger cable insulation, protective sleeving and organised electrical wiring in industrial and commercial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.