Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HS248GREEN Partex 2:1 heat shrink tubing, 4.8/2.4mm, green, pack 75m
Partex HS248GREEN green 2:1 heat shrink tubing, with a nominal expanded internal diameter of 4.8 mm and recovered internal diameter of 2.4 mm, supplied in a 75 metre pack for electrical insulation, wire identification and cable protection.
£30.30
Why Choose the Partex HS248GREEN 2:1 Heat Shrink Tubing?
The Partex HS248GREEN is a versatile 2:1 heat shrink tubing solution designed for electrical insulation, wire identification, cable protection and professional electrical installations. Featuring a nominal expanded internal diameter of 4.8 mm and a fully recovered internal diameter of 2.4 mm, this green heat shrink sleeving is suitable for appropriately sized electrical conductors, wiring connections and cable assemblies.
With its 2:1 shrink ratio, the Partex HS248GREEN can contract to approximately half its original internal diameter when correctly heated, creating a close-fitting protective sleeve around suitable wires and components. This makes it a practical choice for insulating electrical connections, protecting cable sections against light abrasion and providing a professional finish to wiring installations in control panels, machinery and industrial equipment.
The distinctive green finish supports visual wire identification, colour-coded cable management and organised electrical installations. Supplied in a convenient 75 metre pack, the HS248GREEN provides electricians, panel builders, electronics technicians, OEM manufacturers and industrial maintenance engineers with a practical supply of heat shrink tubing for installation, assembly and maintenance work.
Key Advantages
- 2:1 shrink ratio allows the tubing to recover to approximately half its original internal diameter.
- 4.8 mm expanded diameter and 2.4 mm recovered diameter suitable for appropriately sized electrical wires and cable assemblies.
- Provides a close-fitting protective sleeve around compatible conductors, connections and components.
- Green colour supports visual cable identification and organised wiring installations.
- Suitable for electrical insulation, conductor identification and light mechanical protection.
- Helps protect covered wiring from incidental contact, minor abrasion and handling damage.
- Useful for electrical control panels, machinery wiring and industrial equipment assemblies.
- Can be cut to the required length for individual wires, joints and cable identification tasks.
- Supports a tidy, professional finish on wiring connections and cable harnesses.
- Heat-activated installation provides close-fitting coverage without additional mechanical fasteners.
- Practical for repetitive electrical manufacturing, installation and maintenance applications.
- Supplied in a convenient 75 metre pack for professional use.
Key Features
- Partex 2:1 heat shrink tubing range.
- 4.8 mm nominal expanded internal diameter.
- 2.4 mm nominal recovered internal diameter.
- 2:1 heat shrink ratio.
- Green colour for wire identification and colour-coded cable management.
- Heat-activated shrinking for close-fitting cable coverage.
- Suitable for appropriately sized electrical conductors and wiring assemblies.
- Can be cut to custom lengths before installation.
- Useful for insulating and protecting compatible electrical connections.
- Supports organised wiring in control panels and industrial equipment.
- Suitable for cable harness manufacturing and electrical equipment assembly.
- Designed for installation using a suitable controlled heat source.
- Practical for electrical production, installation and maintenance tasks.
- 75 metres total supplied length.
Professional Heat Shrink Insulation and Green Cable Identification for Electrical Installations
The Partex HS248GREEN 2:1 heat shrink tubing is designed for applications requiring a protective sleeve around appropriately sized electrical wires and components. Its 4.8 mm nominal expanded internal diameter allows the tubing to be positioned over compatible conductors and connections, while its 2.4 mm nominal recovered internal diameter enables it to contract around suitable underlying surfaces when correctly heated.
During installation, a suitable length of tubing is cut and positioned over the wire or component before controlled heat is applied. As the tubing shrinks, it conforms to the underlying surface, helping provide electrical insulation and protection against incidental contact, light abrasion and handling damage. Correct sizing is essential: the tubing must pass over the component before shrinking and recover sufficiently to achieve the required finished fit.
The green colour provides a useful visual identification option for selected conductors and wiring groups. Green heat shrink sleeving may form part of a site-specific cable identification system, but it should not automatically be treated as an approved protective earth identifier. Installers must follow applicable wiring regulations and conductor identification requirements, particularly where green-and-yellow identification is required for protective conductors.
With 75 metres supplied per pack, the HS248GREEN is a practical choice for electrical panel building, industrial equipment manufacturing and maintenance departments. The tubing can be cut into individual sleeves of the required length, allowing installers to prepare consistent cable protection and identification solutions for repeated wiring tasks while reducing unnecessary material waste.
For installations requiring a specified insulation voltage, operating temperature range, flame-retardancy classification, chemical resistance or moisture sealing, the relevant Partex technical specifications should be confirmed before use. The 2:1 shrink ratio describes dimensional recovery and does not independently establish these additional performance characteristics or confirm an adhesive lining.
Typical Applications
- Electrical insulation of suitably sized conductors and wiring connections.
- Green colour-coded wire and cable identification.
- Electrical control panel wiring and assembly.
- Industrial automation and instrumentation wiring.
- PLC control systems and electrical equipment installations.
- Cable harnesses and wiring looms.
- Electrical and electronic equipment manufacturing.
- Protective sleeving for appropriately sized soldered wire joints.
- OEM electrical equipment assembly and production.
- Low-voltage wiring where the tubing's ratings are appropriate.
- Workshop electrical repairs and maintenance.
- Prototype development and equipment testing.
- Light abrasion protection for compatible cables.
- Professional electrical installation and repetitive production work.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 75 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 2.4–4.8 mm | |
| Internal Diameter Before Shrinking (mm) | 4.8 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | 2:1 Heat Shrink Tubing | |
| Model / SKU | HS248GREEN | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal expanded internal diameter | 4.8 mm | |
| Nominal recovered internal diameter | 2.4 mm | |
| Colour | Green | |
| Application method | Controlled heating | |
| Cut to length | Yes | |
| Primary functions | Electrical insulation, wire identification and cable protection | |
| Typical applications | Electrical wiring, control panels, industrial equipment and cable assemblies | |
| Pack quantity | 75 metres | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HS248GREEN heat shrink tubing used for?
The Partex HS248GREEN is designed for insulating, identifying and protecting electrical wires and components. It is particularly useful for electrical control panels, industrial equipment wiring, cable harnesses and electrical assemblies.
What size is the Partex HS248GREEN heat shrink tubing?
The tubing has a nominal 4.8 mm expanded internal diameter and a 2.4 mm recovered internal diameter, making it suitable for appropriately sized electrical conductors, connections and components.
What does a 2:1 heat shrink ratio mean?
A 2:1 shrink ratio means the tubing can recover to approximately half its original internal diameter when correctly heated. For the HS248GREEN, this corresponds to a nominal reduction from 4.8 mm to 2.4 mm.
What colour is the Partex HS248GREEN tubing?
The HS248GREEN is green, making it useful for visual wire identification, colour-coded cable management and electrical installations requiring green heat shrink sleeving.
How much heat shrink tubing is supplied in one pack?
Each pack contains 75 metres of green 2:1 heat shrink tubing, providing a practical quantity for electrical installation, equipment manufacturing and maintenance applications.
Can the Partex HS248GREEN tubing be cut to length?
Yes. The tubing can be cut to the required length before installation, allowing individual sleeves to be prepared for different wires, connections and cable identification tasks.
How is the Partex HS248GREEN heat shrink tubing installed?
Cut a suitable length of tubing, slide it over the wire or component, then apply heat evenly using an appropriate controlled heat source until the sleeve contracts to the required fit. Avoid overheating the tubing or damaging the underlying cable insulation.
Can this tubing be used for electrical insulation?
Yes. Heat shrink tubing is commonly used for electrical insulation and protective sleeving. However, the HS248GREEN should only be used where its confirmed electrical and environmental ratings meet the requirements of the installation.
Can green HS248GREEN heat shrink tubing be used to identify protective earth conductors?
Green tubing can be used for general wire identification where permitted, but it should not automatically be used as a substitute for the required green-and-yellow protective conductor identification. Always follow the applicable electrical wiring regulations and identification standards.
Is the HS248GREEN adhesive-lined or waterproof?
The supplied product information does not confirm an adhesive lining or waterproof sealing rating. For applications requiring moisture-resistant or waterproof joints, select heat shrink tubing with a specifically confirmed sealing specification.
Trusted by Electrical Installers and Industrial Professionals
Partex heat shrink tubing provides electricians, panel builders, equipment manufacturers and industrial maintenance engineers with a practical solution for electrical insulation, wire identification and cable protection. Combining versatile 4.8/2.4 mm dimensions, a 2:1 shrink ratio and a distinctive green finish, the HS248GREEN offers close-fitting sleeving for professional wiring applications, with 75 metres supplied for efficient installation, production and maintenance work.
