Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HS232GREEN Partex 2:1 heat shrink tubing, 3.2/1.6mm, green, pack 150m
Partex HS232GREEN is green 2:1 heat shrink tubing with a nominal supplied internal diameter of 3.2 mm and recovered diameter of 1.6 mm, supplied in 150 m packs for electrical insulation, cable protection and conductor identification.
£54.73
Why Choose the Partex HS232GREEN 2:1 Heat Shrink Tubing?
The Partex HS232GREEN is a versatile 2:1 heat shrink tubing designed for electrical insulation, cable protection, conductor identification and professional cable management applications. Featuring a distinctive green finish and heat-activated shrinking properties, this tubing provides a practical solution for insulating, protecting and organising electrical conductors in industrial, commercial and general electrical installations.
As part of the Partex HS2 heat shrink tubing range, the HS232GREEN contracts when heated, forming a close-fitting sleeve around compatible wires, cables and components. Its 2:1 shrink ratio allows the tubing to reduce to approximately half its original internal diameter, providing flexibility when selecting protective sleeves for different conductor sizes and electrical assemblies.
With a nominal supplied internal diameter of 3.2 mm and a recovered internal diameter of 1.6 mm, the HS232GREEN is particularly suitable for small electrical conductors, wiring assemblies and cable identification applications. Supplied in a convenient 150 m pack, it is ideal for electrical panel builders, cable harness manufacturers, maintenance engineers and industrial production environments requiring green heat shrink tubing.
Key Advantages
- 2:1 heat shrink ratio allows the tubing to contract to approximately half its supplied internal diameter.
- 3.2 mm supplied diameter accommodates compatible small electrical conductors and wiring assemblies.
- 1.6 mm recovered diameter provides a close-fitting sleeve when correctly applied.
- Green colour supports visual cable identification, conductor differentiation and organised wiring installations.
- Electrical insulation and mechanical protection help protect compatible conductors and cable components.
- Heat-activated installation provides a neat, conforming finish without mechanical fasteners.
- Cut-to-length flexibility allows individual sleeves to be prepared for different installation requirements.
- 150 m pack quantity provides a practical supply for repetitive installation, manufacturing and maintenance tasks.
Key Features
- Partex HS232GREEN heat shrink tubing.
- 2:1 nominal shrink ratio.
- 3.2 mm nominal supplied internal diameter.
- 1.6 mm nominal recovered internal diameter.
- Green finish for cable identification and visual differentiation.
- Heat-activated shrinking for a close-fitting installation.
- Suitable for insulating and protecting compatible electrical conductors.
- Flexible tubing can be cut into individual sleeves.
- Suitable for installation using an appropriate hot air heat gun.
- Useful for electrical, industrial and general-purpose cable protection applications.
- Supplied in a 150 m pack.
Reliable Electrical Insulation and Cable Identification
The Partex HS232GREEN provides an effective method of insulating and protecting electrical conductors while supporting clear cable identification. When suitable heat is applied, the tubing contracts around the cable or component, creating a close-fitting sleeve that helps protect the underlying surface against incidental abrasion and contact. Its flexible format makes it suitable for cable preparation, electrical assembly and maintenance work where a protective covering is required.
The 2:1 shrink ratio offers flexibility when working with different conductor diameters, while the distinctive green finish helps installers visually distinguish wiring groups and cable identification categories within electrical control panels and cable harnesses. The 150 m pack is particularly useful for repetitive cable preparation, electrical manufacturing and maintenance applications where tubing is cut to individual lengths as required.
Green tubing may be used as part of a defined cable identification scheme, but its colour alone should not be assumed to establish a protective earth conductor designation. Electrical conductor identification must follow the applicable wiring regulations and installation standards.
Typical Applications
- Electrical wire insulation and conductor protection.
- Colour-coded cable identification and wiring organisation.
- Electrical control panel assembly and cable preparation.
- Cable harness manufacturing and wire loom organisation.
- Insulation of compatible electrical joints and connections.
- Industrial machinery and automation wiring.
- Electronics assembly and low-voltage electrical installations.
- Electrical equipment servicing and maintenance.
- Protection of small cable branches and wiring assemblies.
- Professional finishing of cable assemblies and wiring terminations.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 150 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 1.6–3.2 mm | |
| Internal Diameter Before Shrinking (mm) | 3.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | HS2 Heat Shrink Tubing | |
| Model | HS232GREEN | |
| Product type | Heat shrink tubing | |
| Nominal shrink ratio | 2:1 | |
| Supplied internal diameter | 3.2 mm | |
| Recovered internal diameter | 1.6 mm | |
| Colour | Green | |
| Shrinking method | Heat activated | |
| Application | Electrical insulation, cable protection and conductor identification | |
| Installation method | Apply controlled heat using a suitable heat gun | |
| Pack quantity | 150 m | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HS232GREEN used for?
The HS232GREEN is 2:1 heat shrink tubing designed for electrical insulation, wire protection and cable identification, particularly on small conductors and electrical wiring assemblies.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can recover to approximately half its original internal diameter when suitable heat is applied, reducing from a nominal 3.2 mm to 1.6 mm.
What are the supplied and recovered diameters of the HS232GREEN?
The Partex HS232GREEN has a nominal supplied internal diameter of 3.2 mm and a nominal recovered internal diameter of 1.6 mm. The tubing should be selected so that it fits over the component before heating and can shrink sufficiently to grip it afterwards.
How is the Partex HS232GREEN installed?
Cut the tubing to the required length, position it over the cable or component and apply controlled heat using a suitable heat gun until the tubing shrinks evenly around the surface. Follow the manufacturer's installation guidance and avoid overheating the tubing or underlying cable insulation.
How much heat shrink tubing is supplied in a pack?
Each pack contains 150 m of green Partex HS232GREEN heat shrink tubing, suitable for electrical installation, cable preparation and industrial production applications.
Trusted Cable Identification and Protection Solutions
Partex supplies cable identification, marking and protection products for electrical installers, panel builders and industrial maintenance professionals. The HS232GREEN 2:1 heat shrink tubing combines practical sizing, a distinctive green finish and heat-activated shrinking to support organised, insulated and professionally finished wiring assemblies.
