Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HS2254CLEAR clear 2:1 heat shrink tubing, with a nominal expanded internal diameter of 25.4 mm and fully recovered internal diameter of 12.7 mm, supplied in a 30 metre pack for electrical insulation, cable protection and visibility of underlying cable identification markings.
£79.14
The Partex HS2254CLEAR is a versatile 2:1 heat shrink tubing solution designed for electrical insulation, cable protection, wire identification and professional electrical installations. Featuring a nominal expanded internal diameter of 25.4 mm and a nominal fully recovered internal diameter of 12.7 mm, this clear heat shrink sleeving is suitable for appropriately sized electrical cables, wiring harnesses, cable connections and electrical assemblies.
With its 2:1 shrink ratio, the Partex HS2254CLEAR can contract to approximately half its original internal diameter when correctly heated, creating a close-fitting protective sleeve around compatible cables and components. Its larger 25.4 mm starting diameter makes it a practical option for covering suitable cable bundles, wiring joints and components that require a wider sleeve than smaller heat shrink tubing sizes.
The clear, transparent finish is particularly useful where cable identification markings, labels or underlying wiring details need to remain visible beneath the protective sleeving. Supplied in a convenient 30 metre pack, the HS2254CLEAR provides electricians, electrical panel builders, OEM manufacturers and industrial maintenance engineers with a practical supply of transparent heat shrink tubing for installation, assembly and maintenance work.
The Partex HS2254CLEAR 2:1 heat shrink tubing is designed for applications requiring a protective sleeve around suitably sized electrical cables, wiring bundles and components. Its 25.4 mm nominal expanded internal diameter allows the tubing to be positioned over compatible cables and connections, while its 12.7 mm nominal fully recovered internal diameter enables it to contract around suitable underlying surfaces when correctly heated.
During installation, a suitable length of tubing is cut and positioned over the cable or component before controlled heat is applied. As the tubing shrinks, it conforms to the underlying surface, helping provide electrical insulation and protection against incidental contact, light abrasion and handling damage. Correct sizing is essential: the tubing must pass over the component before shrinking and recover sufficiently to achieve the required finished fit. The stated recovered diameter refers to nominal unrestricted recovery rather than a guaranteed final diameter when fitted over a cable.
One of the main benefits of clear heat shrink tubing is the ability to provide protective coverage while retaining visibility of underlying cable markings and identification details. This can be particularly useful in electrical control panels, machinery wiring, cable harnesses and equipment assemblies where labels, printed references or colour-coded insulation need to remain visible. Actual visibility depends on the underlying markings, lighting conditions and the appearance of the tubing after shrinking.
The larger 25.4/12.7 mm size is useful for applications involving appropriately sized cable bundles, wider wiring connections and components that require more clearance during installation. Before selecting this tubing, installers should measure the largest section that the unshrunk sleeve must pass over, along with the diameter of the area where it must achieve a close fit.
With 30 metres supplied per pack, the HS2254CLEAR is a practical choice for electrical panel building, industrial equipment manufacturing and maintenance departments. The tubing can be cut into individual sleeves of the required length, allowing installers to prepare consistent protective covers for repeated wiring tasks while reducing unnecessary material waste.
For installations requiring a specified insulation voltage, operating temperature range, flame-retardancy classification, chemical resistance or moisture sealing, the relevant Partex technical specifications should be confirmed before use. The 2:1 shrink ratio describes dimensional recovery and does not independently establish these additional performance characteristics or confirm an adhesive lining. Transparency should not be taken as evidence of UV resistance or suitability for outdoor exposure.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Clear | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Product range | 2:1 Heat Shrink Tubing | |
| Model / SKU | HS2254CLEAR | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal expanded internal diameter | 25.4 mm | |
| Nominal fully recovered internal diameter | 12.7 mm | |
| Colour | Clear / Transparent | |
| Application method | Controlled heating | |
| Cut to length | Yes | |
| Primary functions | Electrical insulation, cable protection and visibility of underlying identification markings | |
| Typical applications | Electrical wiring, cable bundles, control panels, industrial equipment and cable assemblies | |
| Pack quantity | 30 metres | |
| HS Code | 39269097 |
The Partex HS2254CLEAR is designed for insulating and protecting electrical cables, wiring bundles and components. Its clear finish is particularly useful for applications where underlying cable markings, identification labels or wiring details need to remain visible.
The tubing has a nominal 25.4 mm expanded internal diameter and a 12.7 mm fully recovered internal diameter, making it suitable for appropriately sized electrical cables, wiring bundles, connections and components.
A 2:1 shrink ratio means the tubing can recover to approximately half its original internal diameter when correctly heated. For the HS2254CLEAR, this corresponds to a nominal reduction from 25.4 mm to 12.7 mm.
Yes. The HS2254CLEAR has a clear, transparent finish, making it suitable for protective sleeving applications where visibility of underlying cables, markings and identification details is desirable.
Each pack contains 30 metres of clear 2:1 heat shrink tubing, providing a practical quantity for electrical installation, equipment manufacturing and maintenance applications.
Yes. The tubing can be cut to the required length before installation, allowing individual sleeves to be prepared for different cables, connections, wiring bundles and protective sleeving tasks.
Cut a suitable length of tubing, slide it over the cable or component, then apply heat evenly using an appropriate controlled heat source until the sleeve contracts to the required fit. Avoid overheating the tubing or damaging the underlying cable insulation.
Yes. Heat shrink tubing is commonly used for electrical insulation and protective sleeving. However, the HS2254CLEAR should only be used where its confirmed electrical and environmental ratings meet the requirements of the installation.
Yes. The clear finish makes the tubing useful for covering compatible cable identification labels and printed markings while helping retain their visibility. Check that the label material can tolerate the installation heat and that the markings remain legible after shrinking.
The supplied product information does not confirm an adhesive lining or waterproof sealing rating. For applications requiring moisture-resistant or waterproof joints, select heat shrink tubing with a specifically confirmed sealing specification.
Partex heat shrink tubing provides electricians, panel builders, equipment manufacturers and industrial maintenance engineers with a practical solution for electrical insulation, cable protection and wire identification. Combining versatile 25.4/12.7 mm dimensions, a 2:1 shrink ratio and a clear, transparent finish, the HS2254CLEAR offers close-fitting protective sleeving while helping retain visibility of underlying cable markings and identification details. Supplied in a convenient 30 metre pack, it is a practical choice for professional electrical installation, production and maintenance work.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.