Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HS2254BROWN brown 2:1 heat shrink tubing with a 25.4 mm supplied internal diameter, 12.7 mm nominal recovered internal diameter and 30 m pack quantity, designed for electrical insulation, cable protection and colour-coded line conductor identification.
£79.14
The Partex HS2254BROWN is a versatile brown heat shrink tubing designed for electrical insulation, cable protection, conductor identification and professional cable management. Featuring a 2:1 shrink ratio, this tubing reduces from a nominal supplied internal diameter of 25.4 mm to 12.7 mm when fully recovered, providing a close-fitting protective sleeve around appropriately sized cables, wire bundles and electrical components.
Manufactured by Partex, a recognised specialist in cable identification and electrical installation products, this brown heat shrink tubing provides a practical solution for protecting electrical connections while supporting clear and consistent conductor identification. Its distinctive brown colour is particularly useful for colour-coded wiring systems, helping electricians, control panel builders and maintenance engineers distinguish line conductors and cable groups within electrical installations.
Supplied in a convenient 30 m pack, the HS2254BROWN is suitable for electrical contractors, industrial manufacturers, automation engineers and maintenance professionals requiring a bulk supply of heat shrink sleeving. With its 25.4 mm supplied diameter and 12.7 mm nominal recovered diameter, it is particularly useful for larger conductors, cable bundles, electrical terminations and protective sleeving applications in industrial and commercial environments.
Heat shrink tubing is widely used in electrical and industrial installations to provide protective sleeving around conductors, cable connections and electrical components. When suitable heat is applied, the tubing contracts around the underlying component, creating a neat, close-fitting covering that helps protect against abrasion and provides additional electrical insulation where appropriate.
The Partex HS2254BROWN combines a practical 2:1 shrink ratio with a larger 25.4 mm supplied internal diameter, making it particularly useful for applications involving larger cables, grouped conductors and electrical connections. Its brown finish provides a clearly identifiable appearance across cable assemblies while helping protect the underlying wiring against minor mechanical damage.
In UK and European harmonised wiring systems, brown is commonly used to identify line conductors, including the L1 phase in three-phase electrical installations. Brown heat shrink sleeving can therefore assist with line conductor identification at suitable cable terminations and within electrical control panels. However, the selected identification method must comply with applicable wiring regulations and installation requirements, and colour-coded sleeving must not be treated as a substitute for appropriate electrical safety procedures.
For effective installation, select tubing with a supplied internal diameter large enough to pass over the intended cable, connector or component and a recovered diameter suitable for the required fit. Cut the tubing to length and apply controlled, even heat using an appropriate heat gun, following the manufacturer's installation recommendations and avoiding excessive heating of the underlying cable insulation. Where a moisture-resistant seal or environmental barrier is required, a suitably specified sealing product should be selected rather than assuming standard heat shrink tubing is waterproof.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Brown | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / Part number | HS2254BROWN | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Supplied internal diameter | 25.4 mm | |
| Nominal recovered internal diameter | 12.7 mm | |
| Colour | Brown | |
| Pack quantity | 30 m | |
| Installation method | Heat shrinking | |
| Primary function | Electrical insulation, cable protection and conductor identification | |
| Application | Electrical wiring, cable management, control panels and industrial installations | |
| HS Code | 39269097 |
The Partex HS2254BROWN is used for electrical insulation, cable protection and conductor identification. Its larger supplied diameter makes it particularly useful for appropriately sized cable bundles, electrical connections, control panel wiring and industrial cable management applications.
The tubing has a 2:1 shrink ratio, with a nominal supplied internal diameter of 25.4 mm and a nominal recovered internal diameter of 12.7 mm when fully shrunk under suitable heating conditions.
The HS2254BROWN is supplied in a 30 m pack, providing a convenient bulk quantity for electrical contractors, control panel builders, industrial manufacturers and maintenance applications.
Yes. Brown heat shrink tubing can be used for line conductor identification where appropriate. Brown is the recognised line conductor colour in UK and European harmonised single-phase electrical installations and is commonly associated with the L1 phase in three-phase wiring systems. The selected identification method must comply with applicable electrical regulations and installation requirements.
Cut the tubing to the required length, position it over a suitably sized cable, conductor bundle or electrical component and apply controlled, even heat using an appropriate heat gun. The tubing contracts around the component to provide a close-fitting brown protective sleeve.
Partex cable identification and electrical installation products are used by electrical engineers, control panel builders and industrial maintenance professionals. The HS2254BROWN brown heat shrink tubing provides a practical solution for cable protection, electrical insulation and consistent conductor identification in professional industrial and commercial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.