HS2254BLUE Partex 2:1 heat shrink tubing, 25.4/12.7mm, blue, pack 30m

HS2254BLUE Partex 2:1 heat shrink tubing, 25.4/12.7mm, blue, pack 30m

Partex HS2254BLUE blue 2:1 heat shrink tubing with a 25.4 mm supplied internal diameter, 12.7 mm nominal recovered internal diameter and 30 m pack quantity, designed for electrical insulation, cable protection and colour-coded conductor identification.

SKU: HS2254BLUEMPN: HS2254BLUE
Price
List Price £98.93 ex VAT
Your Price (ex VAT) Save 20%
£79.14 20% OFF
You save £19.79 per pack Price per pack of 30
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £79.14
Trade pricing is personalised to your account

Manufacturer Lead Time

£79.14

Why Choose the Partex HS2254BLUE 2:1 Blue Heat Shrink Tubing?

The Partex HS2254BLUE is a versatile blue heat shrink tubing designed for electrical insulation, cable protection, conductor identification and professional cable management. Featuring a 2:1 shrink ratio, this tubing reduces from a nominal supplied internal diameter of 25.4 mm to 12.7 mm when fully recovered, providing a close-fitting protective sleeve around appropriately sized cables, wire bundles and electrical components.

Manufactured by Partex, a recognised specialist in cable identification and electrical installation products, this blue heat shrink tubing provides a practical solution for protecting electrical connections while supporting clear and consistent conductor identification. Its distinctive blue colour is particularly useful for colour-coded wiring systems, helping electricians, control panel builders and maintenance engineers distinguish conductors and cable groups within electrical installations.

Supplied in a convenient 30 m pack, the HS2254BLUE is suitable for electrical contractors, industrial manufacturers, automation engineers and maintenance professionals requiring a bulk supply of heat shrink sleeving. With its 25.4 mm supplied diameter and 12.7 mm nominal recovered diameter, it is particularly useful for larger conductors, cable bundles, electrical terminations and protective sleeving applications in industrial and commercial environments.

Key Advantages

  • 2:1 heat shrink ratio provides a close fit around appropriately sized cables and electrical components.
  • 25.4 mm supplied diameter reducing to approximately 12.7 mm when fully recovered.
  • Blue colour coding supports clear conductor identification and organised electrical wiring.
  • 30 m bulk pack suitable for professional installations, manufacturing and maintenance environments.
  • Helps provide electrical insulation and mechanical protection for suitable cables and connections.
  • Protective sleeving helps reduce exposure to abrasion and everyday mechanical wear.
  • Suitable for covering appropriately sized cable bundles and electrical terminations.
  • Can be cut to the required length for individual cable identification and insulation tasks.

Key Features

  • Partex HS2254BLUE heat shrink tubing.
  • 2:1 nominal shrink ratio.
  • 25.4 mm supplied internal diameter.
  • 12.7 mm nominal recovered internal diameter.
  • Blue colour for cable identification and colour-coded wiring systems.
  • 30 m pack quantity for professional electrical installation requirements.
  • Heat-activated shrinking for a neat, close-fitting finish.
  • Suitable for electrical insulation, cable protection and conductor identification.
  • Can be cut to length for individual installation requirements.
  • Designed for use in electrical wiring, control panels, industrial machinery and cable assemblies.

Reliable Electrical Insulation and Cable Protection

Heat shrink tubing is widely used in electrical and industrial installations to provide protective sleeving around conductors, cable connections and electrical components. When suitable heat is applied, the tubing contracts around the underlying component, creating a neat, close-fitting covering that helps protect against abrasion and provides additional electrical insulation where appropriate.

The Partex HS2254BLUE combines a practical 2:1 shrink ratio with a larger 25.4 mm supplied internal diameter, making it particularly useful for applications involving larger cables, grouped conductors and electrical connections. Its blue finish provides a clearly identifiable appearance across cable assemblies while helping protect the underlying wiring against minor mechanical damage.

In UK and European harmonised wiring systems, blue is commonly used to identify neutral conductors. Blue heat shrink sleeving can therefore assist with neutral conductor identification at suitable cable terminations and within electrical control panels. However, the selected identification method must comply with applicable wiring regulations and installation requirements, and colour-coded sleeving must not be treated as a substitute for appropriate electrical safety procedures.

For effective installation, select tubing with a supplied internal diameter large enough to pass over the intended cable, connector or component and a recovered diameter suitable for the required fit. Cut the tubing to length and apply controlled, even heat using an appropriate heat gun, following the manufacturer's installation recommendations and avoiding excessive heating of the underlying cable insulation. Where a moisture-resistant seal or environmental barrier is required, a suitably specified sealing product should be selected rather than assuming standard heat shrink tubing is waterproof.

Typical Applications

  • Electrical wire and cable insulation.
  • Blue colour-coded conductor identification.
  • Neutral conductor identification in suitable electrical installations.
  • Protective sleeving for larger conductors and cable bundles.
  • Electrical control panel wiring and assembly.
  • Industrial automation and machine control systems.
  • Protection of suitable cable joints and electrical connections.
  • Wire harness manufacturing and cable management.
  • Electrical equipment manufacturing and assembly.
  • Maintenance and repair of electrical wiring.
  • Protective covering for appropriately sized cable terminations.
  • Commercial and industrial electrical installations.

Technical Specifications

Tick the specs you need, then view products that match.

Supply Format 30 m
Device Type Heat-shrink tubing
Material Polyolefin
Cable Diameter (mm) 12.7–25.4 mm
Internal Diameter Before Shrinking (mm) 25.4 mm
Shrink Ratio 2:1
Colour Blue
Adhesive Lined No
Manufacturer Partex
Model / Part number HS2254BLUE
Product type Heat shrink tubing
Shrink ratio 2:1
Supplied internal diameter 25.4 mm
Nominal recovered internal diameter 12.7 mm
Colour Blue
Pack quantity 30 m
Installation method Heat shrinking
Primary function Electrical insulation, cable protection and conductor identification
Application Electrical wiring, cable management, control panels and industrial installations
HS Code 39269097

Frequently Asked Questions

What is the Partex HS2254BLUE used for?

The Partex HS2254BLUE is used for electrical insulation, cable protection and conductor identification. Its larger supplied diameter makes it particularly useful for appropriately sized cable bundles, electrical connections, control panel wiring and industrial cable management applications.

What is the shrink ratio of the Partex HS2254BLUE?

The tubing has a 2:1 shrink ratio, with a nominal supplied internal diameter of 25.4 mm and a nominal recovered internal diameter of 12.7 mm when fully shrunk under suitable heating conditions.

How much heat shrink tubing is supplied?

The HS2254BLUE is supplied in a 30 m pack, providing a convenient bulk quantity for electrical contractors, control panel builders, industrial manufacturers and maintenance applications.

Can blue heat shrink tubing be used for neutral conductor identification?

Yes. Blue heat shrink tubing can be used for neutral conductor identification where appropriate. Blue is the recognised neutral conductor identification colour in UK and European harmonised electrical installations. The selected identification method must comply with applicable electrical regulations and installation requirements.

How is Partex HS2254BLUE heat shrink tubing installed?

Cut the tubing to the required length, position it over a suitably sized cable, conductor bundle or electrical component and apply controlled, even heat using an appropriate heat gun. The tubing contracts around the component to provide a close-fitting blue protective sleeve.

Trusted by Electrical and Industrial Professionals

Partex cable identification and electrical installation products are used by electrical engineers, control panel builders and industrial maintenance professionals. The HS2254BLUE blue heat shrink tubing provides a practical solution for cable protection, electrical insulation and consistent conductor identification in professional industrial and commercial electrical installations.