Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex HS2191BLACK black 2:1 heat shrink tubing with a 19.1 mm supplied internal diameter, 9.5 mm nominal recovered internal diameter and 50 m pack quantity, designed for electrical insulation, cable protection and professional cable sleeving applications.
£76.51
The Partex HS2191BLACK is a versatile and practical black heat shrink tubing designed for electrical insulation, cable protection, wire identification and professional cable management. Featuring a 2:1 shrink ratio, this tubing reduces from a nominal supplied internal diameter of 19.1 mm to 9.5 mm when fully recovered, providing a close-fitting protective sleeve around appropriately sized cables, wire bundles and electrical components.
Manufactured by Partex, a recognised specialist in cable identification and electrical installation products, this black heat shrink tubing provides an effective solution for protecting electrical connections and improving the finish of cable assemblies. Its black colour provides a discreet, professional appearance, making it particularly suitable for electrical control panels, industrial machinery, cable harnesses and maintenance applications where a consistent finish is required.
Supplied in a convenient 50 m pack, the HS2191BLACK is well suited to electrical contractors, control panel builders, industrial manufacturers and maintenance engineers requiring a bulk supply of protective sleeving. With its 19.1 mm supplied diameter and 9.5 mm nominal recovered diameter, it is particularly useful for larger conductors, cable bundles, electrical terminations and protective sleeving applications in industrial and commercial environments.
Heat shrink tubing is widely used in electrical and industrial installations to provide protective sleeving around conductors, cable connections and electrical components. When suitable heat is applied, the tubing contracts around the underlying component, creating a neat, close-fitting covering that helps protect against abrasion and provides additional electrical insulation where appropriate.
The Partex HS2191BLACK combines a practical 2:1 shrink ratio with a larger 19.1 mm supplied internal diameter, making it particularly useful for applications involving larger cables, grouped conductors and electrical connections. Its black finish provides a consistent appearance across cable assemblies while helping protect the underlying wiring against minor mechanical damage.
Black heat shrink tubing is commonly selected for general-purpose protective sleeving, cable harness assembly and electrical maintenance applications. It can help organise cable bundles, cover suitable connection areas and provide a tidy finish to electrical equipment. Unlike dedicated colour-coded identification sleeving, black tubing is particularly useful where a neutral appearance is preferred and specific conductor identification colours are not required.
For effective installation, select tubing with a supplied internal diameter large enough to pass over the intended cable, connector or component and a recovered diameter suitable for the required fit. Cut the tubing to length and apply controlled, even heat using an appropriate heat gun, following the manufacturer's installation recommendations and avoiding excessive heating of the underlying cable insulation. Where a moisture-resistant seal or environmental barrier is required, a suitably specified sealing product should be selected rather than assuming standard heat shrink tubing is waterproof.
Tick the specs you need, then view products that match.
| Supply Format | 50 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 9.5–19.1 mm | |
| Internal Diameter Before Shrinking (mm) | 19.1 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Black | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / Part number | HS2191BLACK | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Supplied internal diameter | 19.1 mm | |
| Nominal recovered internal diameter | 9.5 mm | |
| Colour | Black | |
| Pack quantity | 50 m | |
| Installation method | Heat shrinking | |
| Primary function | Electrical insulation, cable protection and protective sleeving | |
| Application | Electrical wiring, cable management, control panels and industrial installations | |
| HS Code | 39269097 |
The Partex HS2191BLACK is used for electrical insulation, cable protection and protective sleeving. Its larger supplied diameter makes it particularly useful for appropriately sized cable bundles, electrical connections, control panel wiring and industrial cable management applications.
The tubing has a 2:1 shrink ratio, with a nominal supplied internal diameter of 19.1 mm and a nominal recovered internal diameter of 9.5 mm when fully shrunk under suitable heating conditions.
The HS2191BLACK is supplied in a 50 m pack, providing a convenient bulk quantity for electrical contractors, control panel builders, industrial manufacturers and maintenance applications.
Yes. The 19.1 mm supplied internal diameter allows the tubing to be positioned over suitably sized cable bundles, conductors and electrical connections. When heated, it contracts towards a nominal recovered diameter of 9.5 mm, helping provide a close-fitting protective sleeve. The tubing should be selected according to the dimensions of the application and the required level of insulation and protection.
Cut the tubing to the required length, position it over a suitably sized cable, conductor bundle or electrical component and apply controlled, even heat using an appropriate heat gun. The tubing contracts around the component to provide a close-fitting black protective sleeve.
Partex cable identification and electrical installation products are used by electrical engineers, control panel builders and industrial maintenance professionals. The HS2191BLACK black heat shrink tubing provides a practical solution for cable protection, electrical insulation and professional cable management in industrial and commercial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.