Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HS212GREEN Partex 2:1 heat shrink tubing, 1.2/0.6mm, green, pack 150m
Partex HS212GREEN green 2:1 heat shrink tubing with a 1.2 mm supplied diameter and 0.6 mm nominal recovered diameter, supplied in a 150 m pack for electrical wire insulation, cable identification and small-diameter cable protection.
£36.82
Why Choose the Partex HS212GREEN 2:1 Green Heat Shrink Tubing?
The Partex HS212GREEN is a green 2:1 heat shrink tubing product designed for electrical wire insulation, cable identification and protection of small-diameter connections. Manufactured by Partex, this heat shrink sleeving provides a practical solution for electricians, control panel builders, industrial maintenance engineers and electrical equipment manufacturers.
Featuring a 2:1 shrink ratio, the tubing reduces in diameter when heated, allowing it to conform around suitably sized wires and components. The nominal supplied diameter is 1.2 mm, with a nominal recovered diameter of 0.6 mm. This compact size is particularly useful for fine wiring and small electrical connections where a close-fitting insulating sleeve is required.
The green colour provides a clear visual identification option for cable management and wiring organisation. Supplied in a 150 m pack, the HS212GREEN is suitable for repetitive cutting and installation tasks in electrical panel assembly, cable harness production and maintenance operations.
Key Advantages
- 2:1 heat shrink ratio allows the tubing to reduce to approximately half its original diameter when correctly recovered.
- 1.2 mm supplied diameter makes it suitable for appropriately sized small wires and electrical connections.
- 0.6 mm nominal recovered diameter provides a close-fitting sleeve around compatible components.
- Green colour supports visual cable identification and colour-coded wiring arrangements.
- Heat-activated recovery provides a fitted sleeve without a mechanical fastening mechanism.
- Useful for electrical insulation, cable organisation and protection against incidental contact and light abrasion.
- Can be cut to the required length for individual installation tasks.
- 150 m pack quantity supports repeated use in electrical assembly and maintenance projects.
- Suitable for control panel manufacturing, industrial wiring and cable harness assembly.
Key Features
- Partex HS212GREEN heat shrink tubing.
- 2:1 nominal shrink ratio.
- 1.2 mm nominal supplied diameter.
- 0.6 mm nominal recovered diameter.
- Green colour for cable identification.
- Heat-activated diameter reduction.
- Designed for use on suitably sized wires, conductors and electrical connections.
- Can be cut into individual sleeve lengths.
- Suitable for electrical cable management and wiring assembly.
- Useful for insulating and identifying small-diameter wiring.
- Supplied in a 150 m pack.
Reliable Wire Insulation and Identification for Electrical Control Systems
Effective cable insulation and identification help maintain organised electrical installations and simplify wiring inspection, assembly and maintenance. The Partex HS212GREEN provides a heat-shrinkable sleeve that can be cut to length, positioned over a suitable wire or connection and heated to achieve a close fit. This makes it a practical option for fine wiring in control panels, electrical equipment and industrial automation assemblies.
The combination of a 1.2 mm supplied diameter, 0.6 mm recovered diameter and 2:1 shrink ratio makes this tubing particularly relevant to small-diameter applications. Its green finish can also support site-specific cable identification systems. Installers should confirm the required electrical insulation rating, recovery temperature, operating temperature, material compatibility and environmental suitability against the manufacturer's technical documentation before use. The green colour alone does not establish suitability for protective earthing identification.
Typical Applications
- Insulation of appropriately sized small electrical wires and connections.
- Electrical control panel wiring and assembly.
- Industrial automation and machinery wiring.
- Cable harness production and wire identification.
- Colour-coded cable organisation and circuit identification.
- Electrical equipment manufacturing and OEM assemblies.
- Protection of small wiring sections against light abrasion.
- Electrical maintenance, repairs and cable refurbishment.
- Instrument wiring and low-diameter cable assemblies.
- General-purpose heat shrink sleeving applications where the tubing specifications are suitable.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 150 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 0.6–1.2 mm | |
| Internal Diameter Before Shrinking (mm) | 1.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Manufacturer part number | HS212GREEN | |
| Product type | Heat shrink tubing | |
| Colour | Green | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 1.2 mm | |
| Nominal recovered diameter | 0.6 mm | |
| Diameter reduction | Approximately 50% of supplied diameter | |
| Recovery method | Application of heat | |
| Pack quantity | 150 m | |
| Primary function | Wire insulation, identification and cable protection | |
| Typical applications | Electrical wiring, cable harnesses and control panel assembly | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HS212GREEN used for?
The Partex HS212GREEN is a green heat shrink tubing product used for insulating, identifying and protecting suitably sized small electrical wires, connections and cable assemblies.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can reduce to approximately half its original diameter when correctly heated. The HS212GREEN has a nominal supplied diameter of 1.2 mm and a nominal recovered diameter of 0.6 mm.
What size is the Partex HS212GREEN heat shrink tubing?
The HS212GREEN is specified as 1.2/0.6 mm, meaning a nominal supplied diameter of 1.2 mm and a nominal recovered diameter of 0.6 mm. The tubing should be selected to fit over the component before shrinking and recover sufficiently for the required finished fit.
Can the green HS212GREEN tubing be used for cable identification?
Yes. Its green colour can help distinguish wires or cable groups within an established identification scheme. However, the tubing colour alone does not confirm compliance with any particular conductor identification standard.
How much Partex HS212GREEN heat shrink tubing is supplied in one pack?
Each pack contains 150 m of green heat shrink tubing, which can be cut into suitable lengths for electrical assembly, cable identification and maintenance work.
Trusted by Electrical Installers and Industrial Professionals
Partex cable identification and management products provide practical solutions for electricians, automation engineers, control panel builders and industrial maintenance professionals. The HS212GREEN offers compact, green 2:1 heat shrink sleeving for small-diameter wiring applications where neat insulation, visual identification and flexible cut-to-length installation are important.
