Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ECHS295YELLOW Partex 2:1 heat shrink tubing, 9.5/4.7mm, yellow, pack 75m
Partex ECHS295YELLOW yellow 2:1 heat shrink tubing with a 9.5 mm supplied diameter and 4.7 mm fully recovered diameter, designed for electrical insulation, cable identification and cable protection, supplied in a 75 m pack.
£39.19
Why Choose the Partex ECHS295YELLOW 2:1 Heat Shrink Tubing?
The Partex ECHS295YELLOW is a practical 2:1 heat shrink tubing designed for electrical insulation, wire identification, cable protection and professional cable management. Supplied in yellow, this heat shrink sleeve has a nominal supplied diameter of 9.5 mm and a nominal fully recovered diameter of 4.7 mm, making it suitable for compatible electrical cables, conductors and cable assemblies.
Designed for electrical installation, panel building and cable assembly work, the ECHS295YELLOW contracts when heated to form a close-fitting protective sleeve around suitable cables and components. Its 2:1 shrink ratio provides approximately a halving of the original internal diameter, helping create a neat and professional finish while supporting electrical insulation and protection against everyday handling and abrasion.
With a 9.5/4.7 mm diameter specification and a generous 75 m pack length, the Partex ECHS295YELLOW is well suited to electrical panel builders, wiring harness manufacturers, maintenance engineers and OEM production environments. The yellow colour provides clear visual identification within appropriately designed cable marking systems, while the supplied length supports repeated cutting and installation.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 9.5 mm supplied diameter suitable for compatible electrical cables and wiring assemblies.
- 4.7 mm fully recovered diameter for a close-fitting finish on appropriately sized components.
- Yellow colour supports visible cable identification and organised wiring systems.
- Heat-activated shrinking provides a neat, professional finish without requiring separate fastening components.
- Helps protect covered cable sections against abrasion and everyday handling.
- Suitable for electrical control panels, wiring harnesses and industrial automation equipment.
- 75 m pack length supports workshop use, panel building and repeated production requirements.
Key Features
- Partex ECHS295YELLOW heat shrink tubing.
- 2:1 heat shrink ratio.
- 9.5 mm nominal diameter before shrinking.
- 4.7 mm nominal fully recovered diameter.
- Yellow finish for visible cable identification and colour-coded applications.
- Heat-shrinkable sleeve for electrical insulation and cable protection.
- Suitable for compatible electrical wires, conductors and cable assemblies.
- Can be cut to the required length for individual installations.
- Supports tidy and organised wiring in electrical equipment.
- Suitable for industrial electrical assembly, manufacturing and maintenance.
- Supplied in a 75 m pack for professional use.
Reliable Electrical Insulation and Cable Identification
Heat shrink tubing provides a convenient way to insulate, identify and protect electrical cables and wiring assemblies. The Partex ECHS295YELLOW shrinks when heated, allowing the sleeve to conform closely to appropriately sized conductors and components. Its 2:1 shrink ratio makes it useful where a compact, secure-fitting sleeve and a clean installation finish are required. The yellow finish also makes the covered cable section easy to distinguish within a planned identification system.
The ECHS295YELLOW is particularly useful for electrical panel builders, automation engineers and wiring harness manufacturers working with cables that require protective sleeving or visual identification. Its 75 m supply length allows installers to cut individual sections to suit different applications, reducing the need to purchase numerous pre-cut lengths. For best results, select the tubing according to the cable's outside diameter and apply heat evenly with a suitable heat gun, following the manufacturer's installation guidance. Yellow sleeving should only be used for conductor identification where permitted by applicable wiring regulations.
Typical Applications
- Electrical wire insulation and cable protection.
- Colour-coded cable and conductor identification where appropriate.
- Industrial electrical control panels and cabinets.
- PLC wiring and industrial automation equipment.
- Wiring harness manufacturing and cable assembly.
- Protective sleeving for compatible cable connections.
- OEM electrical equipment manufacturing.
- Electrical maintenance, repair and workshop applications.
- Cable management in machinery and industrial control systems.
- Protective finishing of suitably sized wiring assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 75 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 4.7–9.5 mm | |
| Internal Diameter Before Shrinking (mm) | 9.5 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Yellow | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model | ECHS295YELLOW | |
| Product type | Heat shrink tubing | |
| Product category | Electrical insulation and cable protection | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 9.5 mm | |
| Nominal fully recovered diameter | 4.7 mm | |
| Diameter specification | 9.5/4.7 mm | |
| Colour | Yellow | |
| Shrinking method | Heat activated | |
| Application | Electrical insulation, cable identification and cable protection | |
| Installation method | Slide over a compatible cable or component and apply controlled heat | |
| Supplied length | 75 m | |
| Pack quantity | 1 pack containing 75 m of tubing | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex ECHS295YELLOW used for?
The Partex ECHS295YELLOW is yellow heat shrink tubing used for electrical insulation, cable protection, wire identification and the professional finishing of compatible electrical cable assemblies.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered. The ECHS295YELLOW has a nominal supplied diameter of 9.5 mm and a specified fully recovered diameter of 4.7 mm.
What size cable is the ECHS295YELLOW suitable for?
The tubing has a nominal supplied diameter of 9.5 mm and a fully recovered diameter of 4.7 mm. It should be selected for cables or components that the tubing can pass over before shrinking and grip adequately after heat recovery. Check the cable's outside diameter rather than relying solely on conductor cross-sectional area.
How is the Partex ECHS295YELLOW installed?
Cut the tubing to the required length, slide it over the cable or component and apply controlled heat evenly using a suitable heat gun. The tubing contracts around the component as it heats. Follow the manufacturer's recommended installation conditions and avoid overheating or damaging the underlying cable insulation.
How much heat shrink tubing is supplied in one pack?
The Partex ECHS295YELLOW is supplied in a 75 m pack, making it suitable for electrical workshops, control panel assembly, wiring harness production and repeated maintenance applications.
Trusted Cable Identification and Protection Solutions from Partex
Partex supplies professional cable identification, insulation and cable management products for electrical and industrial applications. The ECHS295YELLOW yellow 2:1 heat shrink tubing provides a practical solution for insulating, protecting and identifying compatible electrical wiring, with a 9.5/4.7 mm diameter specification and a convenient 75 m supply length for panel builders, electricians and OEM manufacturers.
