Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ECHS295EARTH(GRN/YEL) Partex 2:1 heat shrink tubing, 9.5/4.7mm, green/yellow, pack 75m
Partex ECHS295EARTH(GRN/YEL) green/yellow 2:1 heat shrink tubing with a 9.5 mm supplied internal diameter and 4.7 mm fully recovered internal diameter, supplied in a 75 m pack for electrical insulation, conductor protection and protective earth identification.
£39.19
Why Choose the Partex ECHS295EARTH(GRN/YEL) 2:1 Heat Shrink Tubing?
The Partex ECHS295EARTH(GRN/YEL) is a practical 2:1 heat shrink tubing designed for electrical insulation, cable protection and protective earth conductor identification. Supplied in a distinctive green/yellow finish, this heat shrink sleeving is particularly suitable for electrical installations where clear and consistent identification of protective earth (PE) conductors is essential.
Featuring a nominal supplied internal diameter of 9.5 mm and a fully recovered internal diameter of 4.7 mm, the ECHS295EARTH(GRN/YEL) offers an approximately 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized conductors, cables and electrical components, creating a close-fitting sleeve that supports electrical insulation and mechanical protection.
Supplied in a convenient 75 m pack, this Partex green/yellow heat shrink tubing is well suited to electrical panel builders, control system manufacturers, maintenance engineers and industrial wiring applications. Its distinctive two-colour finish supports the identification of protective earth conductors, while the cut-to-length format provides flexibility for individual electrical installations and repeated production requirements.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and conductor protection.
- 9.5 mm supplied internal diameter reducing to approximately 4.7 mm after full recovery.
- Green/yellow colour combination supports protective earth conductor identification.
- Heat-activated shrinking provides a close fit around compatible cables and conductors.
- Helps protect sleeved electrical conductors against abrasion and everyday mechanical wear.
- Suitable for electrical control panels, industrial wiring and automation equipment.
- Convenient 75 m supply length for regular installation and manufacturing requirements.
- Can be cut to the required length for individual conductor and cable applications.
Key Features
- Partex ECHS295EARTH(GRN/YEL) heat shrink tubing.
- 2:1 shrink ratio for controlled dimensional recovery.
- 9.5 mm nominal supplied internal diameter.
- 4.7 mm nominal fully recovered internal diameter.
- Green/yellow finish for protective earth conductor identification.
- Heat-activated tubing designed to contract around electrical wires and components.
- Provides an additional layer of electrical insulation and mechanical protection.
- Suitable for electrical panel wiring, earthing conductors and cable assemblies.
- 75 m pack length suitable for production, installation and maintenance use.
Green/Yellow Heat Shrink Tubing for Protective Earth Identification
The green/yellow colour combination is used to identify protective earth (PE) conductors in electrical installations. The Partex ECHS295EARTH(GRN/YEL) 2:1 heat shrink tubing provides a convenient method of applying this identification to appropriately sized conductors and cable assemblies. When heated, the tubing contracts around the conductor to create a close-fitting sleeve, helping maintain clear identification while providing an additional protective covering.
The 9.5/4.7 mm diameter configuration makes this tubing suitable for a range of compatible electrical conductors, cable ends and wiring assemblies. It is particularly useful in industrial control panels, electrical distribution equipment and machinery wiring where protective earth identification is required. For effective installation, ensure the tubing fits over the conductor before heating and has sufficient recovery to grip it securely. Apply heat evenly using a suitable controlled heat source and follow the manufacturer's installation guidance. Green/yellow identification should be reserved for protective conductors in accordance with applicable wiring regulations and standards.
Typical Applications
- Protective earth (PE) conductor identification.
- Industrial control panel earthing and bonding wiring.
- Electrical distribution board and switchgear wiring.
- Machinery and industrial automation earthing systems.
- Electrical conductor insulation and mechanical protection.
- Wiring harness manufacturing and assembly.
- Protective bonding conductor identification.
- Electrical maintenance, repairs and production assembly.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 75 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 4.7–9.5 mm | |
| Internal Diameter Before Shrinking (mm) | 9.5 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green/Yellow | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS | |
| Model | ECHS295EARTH(GRN/YEL) | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 9.5 mm | |
| Nominal diameter after full recovery | 4.7 mm | |
| Colour | Green/yellow | |
| Identification purpose | Protective earth (PE) conductors | |
| Installation method | Heat activated | |
| Application | Electrical insulation, conductor protection and protective earth identification | |
| Supply length | 75 m | |
| Pack quantity | 1 × 75 m length | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex ECHS295EARTH(GRN/YEL) used for?
The Partex ECHS295EARTH(GRN/YEL) is 2:1 heat shrink tubing used for electrical insulation, conductor protection and protective earth (PE) identification. Its green/yellow finish makes it particularly suitable for identifying earthing and protective bonding conductors in electrical installations.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered. The ECHS295EARTH(GRN/YEL) has a nominal internal diameter of 9.5 mm before shrinking and 4.7 mm after full recovery.
What size cables is this heat shrink tubing suitable for?
The tubing has a nominal supplied internal diameter of 9.5 mm and a fully recovered internal diameter of 4.7 mm. It is suitable for appropriately sized conductors and components that fit inside the tubing before heating and allow it to grip securely after shrinking. Select the correct size according to the conductor's outside diameter and the required recovery.
Why is this heat shrink tubing green and yellow?
The green/yellow colour combination is used for protective earth conductor identification in electrical installations. This makes the ECHS295EARTH(GRN/YEL) suitable for marking protective earth and bonding conductors where this identification is required by the applicable wiring standards.
How much heat shrink tubing is supplied in one pack?
The Partex ECHS295EARTH(GRN/YEL) is supplied in a 75 m pack, providing a practical quantity for electrical panel building, protective earth conductor identification, industrial wiring and maintenance applications.
Trusted Cable Identification and Protection Solutions from Partex
Partex provides cable identification, insulation and management products for electrical engineers, panel builders and industrial maintenance professionals. The ECHS295EARTH(GRN/YEL) 2:1 green/yellow heat shrink tubing offers a practical solution for protecting and identifying protective earth conductors, with a 75 m supply length suited to regular installation and production requirements.
