Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ECHS2762GREEN Partex 2:1 heat shrink tubing, 76.2/38.1mm, green, pack 15m
Partex ECHS2762GREEN green 2:1 heat shrink tubing with a 76.2 mm supplied internal diameter and 38.1 mm fully recovered internal diameter, supplied in a 15 m pack for electrical insulation, cable protection and wire identification.
£161.18
Why Choose the Partex ECHS2762GREEN 2:1 Heat Shrink Tubing?
The Partex ECHS2762GREEN is a versatile 2:1 heat shrink tubing designed for electrical insulation, cable protection and wire identification in industrial, commercial and electrical engineering applications. Supplied in a distinctive green finish, this larger-diameter heat shrink sleeving provides a practical solution for protecting electrical cables, insulating connections and organising substantial wiring assemblies.
Featuring a nominal supplied internal diameter of 76.2 mm and a fully recovered internal diameter of 38.1 mm, the ECHS2762GREEN offers a 2:1 shrink ratio. When suitable heat is applied, the tubing contracts to approximately half its original internal diameter, forming a close-fitting protective sleeve around appropriately sized cables, cable bundles and electrical components.
Supplied in a convenient 15 m pack, the Partex ECHS2762GREEN is particularly suitable for electrical panel builders, wiring harness manufacturers, maintenance engineers and industrial production environments. Its generous supplied diameter makes it useful for sleeving compatible larger cable assemblies and components, while the green finish supports colour-coded cable identification and provides a consistent appearance across electrical installations.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 76.2 mm supplied internal diameter reducing to approximately 38.1 mm after full recovery.
- Green colour supports cable identification and colour-coded electrical installations.
- Heat-activated shrinking creates a close-fitting sleeve around compatible cables and electrical components.
- Helps protect sleeved cable assemblies against abrasion, handling and everyday mechanical wear.
- Large supplied diameter accommodates appropriately sized cable bundles, conductors and components.
- Convenient 15 m supply length for installation, maintenance and production requirements.
- Can be cut to the required length for individual cable assemblies, connections and protective sleeving applications.
Key Features
- Partex ECHS2762GREEN heat shrink tubing.
- 2:1 shrink ratio for controlled dimensional recovery.
- 76.2 mm nominal supplied internal diameter.
- 38.1 mm nominal fully recovered internal diameter.
- Green finish for colour-coded cable identification.
- Heat-activated tubing designed to contract around compatible electrical cables and components.
- Provides an additional layer of electrical insulation and mechanical protection.
- Suitable for larger cable assemblies, wiring harnesses and component sleeving.
- 15 m pack length suitable for electrical installation, production and maintenance use.
Reliable Electrical Insulation and Protection for Large Cable Assemblies
Heat shrink tubing provides a convenient method of insulating electrical conductors, covering compatible cable joints and protecting wiring assemblies. The Partex ECHS2762GREEN 2:1 heat shrink tubing contracts when suitable heat is applied, allowing the sleeve to conform closely to appropriately sized cables and electrical components. This helps create a neat, organised installation while providing an additional protective layer against everyday mechanical wear.
The 76.2/38.1 mm diameter configuration makes this tubing particularly useful for compatible larger electrical cables, substantial wiring harnesses and cable bundles. Its generous supplied diameter allows it to pass over appropriately sized components and cable assemblies before shrinking. The green finish can also support visual identification within a colour-coded cable management system, making it easier to distinguish selected wiring groups during installation, inspection and maintenance.
For effective installation, ensure the tubing fits over the cable or component before heating and has sufficient recovery to grip it securely. Apply heat evenly using a suitable controlled heat source and follow the manufacturer's installation guidance. Where conductor identification is regulated, use the green colour only in accordance with applicable wiring standards. In particular, plain green sleeving should not be assumed to provide compliant protective earth identification where green/yellow identification is required. Heat shrink tubing should not be assumed to provide a waterproof seal unless the relevant sealing properties have been confirmed.
Typical Applications
- Electrical cable insulation and protection.
- Industrial control panel wiring and cable management.
- Protective sleeving for compatible large-diameter cables and conductors.
- Wiring harness manufacturing and assembly.
- Green colour-coded cable and conductor identification.
- Covering compatible larger cable joints and electrical connections.
- Industrial automation equipment and machinery wiring.
- Electrical maintenance, repairs and production assembly.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 15 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 38.1–76.2 mm | |
| Internal Diameter Before Shrinking (mm) | 76.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS | |
| Model | ECHS2762GREEN | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 76.2 mm | |
| Nominal diameter after full recovery | 38.1 mm | |
| Colour | Green | |
| Installation method | Heat activated | |
| Application | Electrical insulation, cable protection and wire identification | |
| Supply length | 15 m | |
| Pack quantity | 1 × 15 m length | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex ECHS2762GREEN used for?
The Partex ECHS2762GREEN is 2:1 heat shrink tubing used to insulate, protect and identify electrical cables, connections and wiring assemblies. Its large supplied diameter makes it particularly useful for appropriately sized cable bundles, larger conductors and electrical components in industrial and commercial installations.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered. The ECHS2762GREEN has a nominal internal diameter of 76.2 mm before shrinking and 38.1 mm after full recovery.
What size cables is this heat shrink tubing suitable for?
The tubing has a nominal supplied internal diameter of 76.2 mm and a fully recovered internal diameter of 38.1 mm. It is suitable for appropriately sized cables, cable bundles and components that fit inside the tubing before heating and allow it to grip securely after shrinking. Select the correct size according to the cable's outside diameter, any components the tubing must pass over and the required recovery.
What colour is the ECHS2762GREEN heat shrink tubing?
The ECHS2762GREEN is supplied in green, making it useful for cable identification and colour-coded wiring systems where green sleeving is specified. The colour should be used in accordance with applicable wiring identification requirements, particularly where protective earth conductors require green/yellow identification.
How much heat shrink tubing is supplied in one pack?
The Partex ECHS2762GREEN is supplied in a 15 m pack, providing a practical quantity for electrical panel building, wiring harness production, maintenance and other applications requiring lengths of large-diameter heat shrink tubing.
Trusted Cable Identification and Protection Solutions from Partex
Partex provides cable identification, insulation and management products for electrical engineers, panel builders and industrial maintenance professionals. The ECHS2762GREEN 2:1 green heat shrink tubing offers a practical solution for protecting and identifying larger electrical cables and wiring assemblies, with a 15 m supply length suited to installation, maintenance and production requirements.
