Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ECHS2762BLACK Partex 2:1 heat shrink tubing, 76.2/38.1mm, black, pack 15m
Partex ECHS2762BLACK black 2:1 heat shrink tubing with a 76.2 mm supplied internal diameter and 38.1 mm recovered internal diameter, supplied in a 15 m pack for electrical insulation, large cable protection and professional cable assembly finishing.
£161.18
Why Choose the Partex ECHS2762BLACK 2:1 Black Heat Shrink Tubing?
The Partex ECHS2762BLACK is a versatile 2:1 black heat shrink tubing designed for electrical insulation, cable protection and professional cable finishing in industrial and commercial electrical installations. Part of the Partex ECHS heat shrink tubing range, this large-diameter protective sleeving provides a practical solution for covering electrical cables, protecting insulated connections and achieving a neat, consistent finish on wiring assemblies, cable harnesses and electrical equipment.
Featuring a nominal supplied internal diameter of 76.2 mm and a nominal fully recovered internal diameter of 38.1 mm, the ECHS2762BLACK offers a 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized cables and components, creating a close-fitting protective covering that helps reduce abrasion, mechanical wear and damage caused by routine handling. Its substantial diameter makes it particularly useful for sleeving compatible large cables, multicore cable assemblies, cable bundles and insulated joints.
The black finish provides a professional appearance and supports consistent cable protection and identification in industrial wiring systems. Supplied in a convenient 15 m pack, the ECHS2762BLACK is suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring dependable large-diameter heat shrink sleeving for cable preparation, electrical assembly and maintenance applications.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 76.2 mm nominal supplied internal diameter accommodates appropriately sized large cables, insulated connections and wiring assemblies.
- 38.1 mm nominal recovered internal diameter enables a close-fitting finish on compatible cables and components.
- Black colour provides a professional and consistent finish for industrial cable installations.
- Heat-activated shrinking allows the tubing to conform around suitable electrical cables and connections.
- Helps protect cable insulation and wiring assemblies against abrasion, handling damage and mechanical wear.
- Suitable for electrical insulation, protective cable sleeving and cable assembly finishing.
- Large-diameter construction is useful for covering compatible multicore cables, cable bundles and insulated joints.
- Can be cut to the required length for individual cable protection and finishing applications.
- Supports tidy, professional wiring installations in control panels, machinery and electrical equipment.
- Provides a consistent black covering for appropriately sized electrical cable assemblies.
- Convenient 15 m pack supports professional electrical installation, maintenance and production work.
Key Features
- Partex ECHS2762BLACK black heat shrink tubing.
- 2:1 nominal shrink ratio for controlled diameter reduction when heated.
- 76.2 mm nominal supplied internal diameter.
- 38.1 mm nominal fully recovered internal diameter.
- Black finish for professional cable protection and identification applications.
- Heat-shrinkable construction for close-fitting cable and component sleeving.
- Suitable for protecting compatible electrical cables, insulated joints and connections.
- Provides an additional protective covering around appropriately prepared electrical assemblies.
- Large-diameter format suitable for appropriately sized cable bundles and wiring harnesses.
- Useful for cable protection, identification and finishing applications.
- Cut-to-length format for flexible installation and cable preparation.
- Supplied in a 15 m pack.
Reliable Large-Diameter Cable Protection and Electrical Insulation for Industrial Wiring
Heat shrink tubing is widely used in electrical engineering, industrial automation and control panel manufacturing to provide an insulating and protective covering around cables, electrical connections and wiring assemblies. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying cable or component. This creates a neat protective sleeve that helps reduce exposure to abrasion, handling damage and mechanical wear while supporting professional cable management.
The Partex ECHS2762BLACK 2:1 black heat shrink tubing has a nominal internal diameter of 76.2 mm before shrinking and a nominal fully recovered diameter of 38.1 mm. These dimensions make it suitable for appropriately sized large electrical cables, insulated joints, cable bundles and wiring assemblies. Its black finish provides a consistent appearance for cable protection and finishing applications in industrial machinery, electrical distribution equipment, control panels and OEM cable assemblies.
For dependable results, the tubing should have sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to achieve the required fit. Apply heat evenly using suitable equipment and avoid excessive temperatures that could damage the tubing or underlying insulation. The selected sleeving should be compatible with the dimensions and electrical requirements of the installation. Standard heat shrink tubing should not be assumed to provide a waterproof seal or adhesive-lined protection unless those properties are specifically confirmed for the product.
Typical Applications
- Electrical cable insulation and protection.
- Protective sleeving for appropriately sized large-diameter cables.
- Covering compatible multicore cable assemblies and cable bundles.
- Protection of suitable insulated electrical connections.
- Industrial control panel wiring and assembly.
- Electrical distribution equipment and switchgear cable management.
- Industrial automation and machinery wiring.
- Electrical equipment manufacturing and assembly.
- OEM cable harness and wiring loom production.
- Protective covering for cable sections exposed to routine handling.
- Electrical maintenance, repairs and refurbishment work.
- Professional cable preparation and production assembly.
- Large-diameter cable finishing and identification applications.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 15 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 38.1–76.2 mm | |
| Internal Diameter Before Shrinking (mm) | 76.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Black | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS Heat Shrink Tubing | |
| Model | ECHS2762BLACK | |
| Product type | Heat shrink tubing | |
| Product category | Heat Shrink Sleeving and Cable Protection | |
| Nominal shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 76.2 mm | |
| Nominal fully recovered internal diameter | 38.1 mm | |
| Colour | Black | |
| Operating principle | Heat-activated diameter reduction | |
| Application | Electrical insulation, cable protection and cable assembly finishing | |
| Installation method | Position over the cable or component and apply controlled heat | |
| Format | Cut-to-length heat shrink tubing | |
| Pack length | 15 m | |
| Manufacturer SKU | ECHS2762BLACK | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex ECHS2762BLACK heat shrink tubing used for?
The Partex ECHS2762BLACK is used for electrical insulation, cable protection, connection sleeving and cable assembly finishing. Its nominal 76.2 mm supplied internal diameter makes it suitable for appropriately sized large cables, insulated connections, cable bundles and wiring harness assemblies.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered under suitable heating conditions. The ECHS2762BLACK has a nominal supplied internal diameter of 76.2 mm and a nominal recovered internal diameter of 38.1 mm.
Is the ECHS2762BLACK suitable for large cable bundles?
Yes, the 76.2 mm supplied internal diameter makes the ECHS2762BLACK suitable for appropriately sized larger cables and cable bundles. The tubing must be large enough to pass over the assembly before shrinking, while its nominal 38.1 mm recovered diameter must provide a suitable fit around the finished cable bundle.
How is the Partex ECHS2762BLACK installed?
Cut the tubing to the required length, slide it over the cable or component and apply controlled heat evenly using a suitable heat gun. The tubing contracts around the component as it heats. Ensure the selected tubing dimensions are compatible with the assembly and avoid overheating the tubing or underlying cable insulation.
How much black heat shrink tubing is supplied in one pack?
The Partex ECHS2762BLACK is supplied in a 15 m pack, providing a practical quantity for industrial wiring, large cable protection, cable harness manufacturing, electrical equipment assembly and maintenance applications.
Trusted by Electrical Engineers and Cable Assembly Professionals
Partex cable identification and installation accessories provide practical solutions for electrical engineers, industrial maintenance teams and control panel manufacturers. The ECHS2762BLACK black 2:1 heat shrink tubing combines convenient installation, professional cable finishing and practical protective sleeving for large electrical cables, wiring assemblies and industrial maintenance applications.
