Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS264CLEAR is transparent 2:1 heat shrink tubing with a nominal supplied diameter of 6.4 mm, a recovered diameter of 3.2 mm and a total length of 75 m for electrical insulation, cable identification and wire protection.
£31.67
The Partex ECHS264CLEAR is a professional clear 2:1 heat shrink tubing designed for electrical wire insulation, cable protection, identification label covering and general wiring applications. Featuring a nominal supplied diameter of 6.4 mm and a nominal fully recovered diameter of 3.2 mm, this transparent heat shrink sleeving provides a neat, close-fitting protective covering around suitably sized wires, cable assemblies and electrical components.
The 2:1 shrink ratio allows the tubing to recover to approximately half its original internal diameter when heated correctly. Its clear finish is particularly useful where underlying cable colours, printed identification markers or wiring labels need to remain visible after installation. The tubing also provides an additional insulating layer while helping protect covered surfaces against abrasion and general handling wear.
Supplied in a convenient 75 m pack, the ECHS264CLEAR is suitable for electrical contractors, control panel builders, equipment manufacturers and maintenance engineers requiring consistent heat shrink sleeving for repeated installation tasks. Its transparent appearance makes it a practical choice for cable identification, electrical assembly, equipment wiring and professional cable management.
The Partex ECHS264CLEAR is designed to create a close-fitting protective sleeve around compatible electrical wires and components while retaining visibility of the underlying surface. This makes transparent heat shrink tubing particularly useful for protecting printed cable markers, wire identification labels and colour-coded conductors without unnecessarily concealing their identifying details. The sleeve is positioned over the required section before controlled heat is applied evenly using suitable hot-air equipment.
With a nominal diameter of 6.4 mm before shrinking and 3.2 mm after full recovery, this tubing is suitable for applications requiring medium-sized heat shrink sleeving. It should be selected so that it slides over the component before heating and contracts sufficiently to grip it afterwards. The 75 m supply length enables installers to cut sleeves to the required dimensions for efficient electrical assembly and maintenance. The tubing should not be assumed to provide a waterproof seal unless the completed assembly has been separately designed and verified for that purpose.
Tick the specs you need, then view products that match.
| Supply Format | 75 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 3.2–6.4 mm | |
| Internal Diameter Before Shrinking (mm) | 6.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Clear | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / SKU | ECHS264CLEAR | |
| Product type | Heat shrink tubing | |
| Product category | Heat shrink sleeving and cable insulation accessories | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 6.4 mm | |
| Nominal fully recovered diameter | 3.2 mm | |
| Colour | Clear | |
| Appearance | Transparent | |
| Supplied length | 75 m | |
| Recovery method | Heat activated | |
| Form | Flexible tubular sleeving | |
| Application | Electrical insulation, cable identification and wire protection | |
| Suitable use | Compatible electrical wires, cable joints, conductor connections and identification label covers | |
| HS Code | 39269097 |
The Partex ECHS264CLEAR is transparent heat shrink tubing used for electrical wire insulation, cable protection and covering compatible identification labels or markings while allowing the underlying surface to remain visible.
A 2:1 shrink ratio means the tubing can recover to approximately half its original internal diameter when heated correctly. For this product, the nominal diameter changes from 6.4 mm to 3.2 mm upon full recovery.
The tubing has a nominal supplied diameter of 6.4 mm and a nominal fully recovered diameter of 3.2 mm. It should be used with wires and components that fit inside the tubing before shrinking and can be gripped securely after recovery.
The Partex ECHS264CLEAR is supplied in a 75 m pack, providing tubing that can be cut into individual sleeves for electrical installation, cable identification, manufacturing and maintenance work.
Cut the tubing to the required length, slide it over the wire or component, and apply controlled heat evenly using suitable hot-air equipment until the tubing contracts around the surface. Avoid overheating and follow appropriate electrical safety procedures.
Yes. The clear finish makes the ECHS264CLEAR useful for covering suitably sized cable identification labels and markings while helping retain their visibility. The underlying label or marking must be compatible with the installation temperature, and legibility should be checked after shrinking.
Partex supplies professional cable marking, identification and installation accessories for electrical and industrial applications. The ECHS264CLEAR clear 2:1 heat shrink tubing combines convenient heat-activated recovery, transparent cable coverage and a practical 75 m supply length to support efficient electrical insulation, cable identification and wiring protection.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.