Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS248EARTH(GRN/YEL) is green/yellow 2:1 heat shrink tubing with a nominal supplied diameter of 4.8 mm and recovered diameter of 2.4 mm for protective earth conductor identification and electrical sleeving, supplied in a 75 m pack.
£24.49
The Partex ECHS248EARTH(GRN/YEL) is a green/yellow 2:1 heat shrink tubing product designed for electrical conductor identification, insulation and protection. Featuring a nominal supplied diameter of 4.8 mm and a nominal fully recovered diameter of 2.4 mm, this tubing is particularly suitable for identifying protective earth conductors in electrical installations, control panels and industrial equipment.
With its 2:1 shrink ratio, the ECHS248EARTH(GRN/YEL) is designed to reduce to approximately half its original diameter when correctly heated and allowed to recover fully. This allows the tubing to conform closely around appropriately sized conductors, providing a neat protective sleeve. Its distinctive green/yellow colour combination supports the identification of protective earth conductors in accordance with applicable electrical wiring conventions.
Supplied in a convenient 75 m pack, the Partex ECHS248EARTH(GRN/YEL) is a practical choice for electrical contractors, control panel manufacturers, switchgear assemblers and maintenance engineers requiring consistent green/yellow heat shrink sleeving for protective conductor identification and electrical assembly work.
The Partex ECHS248EARTH(GRN/YEL) provides a practical method of identifying and sleeving protective earth conductors using heat-activated tubing. Its nominal supplied diameter of 4.8 mm allows it to be positioned over appropriately sized conductors, while its 2:1 recovery ratio enables the tubing to shrink towards a nominal fully recovered diameter of 2.4 mm when sufficient heat is applied.
The green/yellow colour combination is widely used to identify protective earth conductors in electrical installations. This makes the ECHS248EARTH(GRN/YEL) particularly useful where conductor identification must remain clear and consistent throughout an electrical assembly. For effective installation, select tubing according to the conductor's outside diameter, cut it to the required length and heat it evenly using suitable equipment. Applications requiring specific dielectric ratings, operating temperatures, flame classifications or environmental certifications should be checked against the applicable Partex product specifications before installation.
Tick the specs you need, then view products that match.
| Supply Format | 75 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 2.4–4.8 mm | |
| Internal Diameter Before Shrinking (mm) | 4.8 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green/Yellow | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / SKU | ECHS248EARTH(GRN/YEL) | |
| Product name | 2:1 Heat Shrink Tubing 4.8/2.4 mm Green/Yellow | |
| Product type | Heat shrink tubing | |
| Product series | ECHS | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 4.8 mm | |
| Nominal recovered diameter | 2.4 mm | |
| Colour | Green/yellow | |
| Colour identification | Protective earth | |
| Recovery method | Application of heat | |
| Product form | Tubular sleeving | |
| Supplied quantity | 75 m | |
| Primary application | Protective earth conductor identification and electrical sleeving | |
| Product category | Heat Shrink Tubing | |
| HS Code | 39269097 |
The Partex ECHS248EARTH(GRN/YEL) is green/yellow heat shrink tubing designed for identifying and sleeving appropriately sized electrical conductors, particularly protective earth conductors.
A 2:1 shrink ratio means the tubing is designed to recover to approximately half its original diameter when correctly heated and allowed to shrink fully.
The tubing has a nominal supplied diameter of 4.8 mm and a nominal fully recovered diameter of 2.4 mm.
The green/yellow colour combination is used to identify protective earth conductors in electrical installations. This helps distinguish protective conductors from line and neutral conductors.
The specified pack quantity is 75 m of green/yellow Partex ECHS248EARTH(GRN/YEL) heat shrink tubing.
Yes. The tubing can be cut into suitable lengths before being positioned over the conductor and heated to achieve the required fit.
Select tubing that fits over the conductor before shrinking, cut it to the required length and apply heat evenly using suitable equipment. Follow the manufacturer's recommended heating and installation conditions.
Yes. The green/yellow colour combination is intended for protective earth conductor identification. The completed installation must comply with applicable electrical wiring standards and conductor identification requirements.
No. Green/yellow identification is reserved for protective conductors under applicable UK wiring conventions and must not be used to identify line or neutral conductors.
The nominal supplied diameter is 4.8 mm, so the tubing is intended for appropriately sized conductors and components. Larger cables generally require heat shrink tubing with a larger supplied diameter.
The supplied product information identifies the tubing's size, colour, shrink ratio and quantity but does not confirm an adhesive lining. Applications requiring adhesive-lined or moisture-sealing tubing should use a product with those properties explicitly specified.
Waterproof sealing is not established by the supplied specifications. Where moisture sealing is required, select tubing with a verified sealing construction and the appropriate manufacturer rating.
Both products are 2:1 heat shrink tubing with nominal supplied and recovered diameters of 4.8/2.4 mm and a 75 m pack quantity. The ECHS248EARTH(GRN/YEL) is green/yellow for protective earth identification, whereas the ECHS248CLEAR is transparent for applications where underlying cable colours or markings need to remain visible.
Partex cable identification and insulation products provide practical solutions for electrical installations, control panel assembly and industrial wiring applications. The ECHS248EARTH(GRN/YEL) 2:1 heat shrink tubing combines a versatile 4.8/2.4 mm diameter specification, distinctive green/yellow protective earth identification and a convenient 75 m pack quantity, making it a useful choice for electrical contractors, switchgear manufacturers, panel builders and maintenance engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.