Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS248BLACK is black 2:1 heat shrink tubing with a nominal supplied diameter of 4.8 mm, a recovered diameter of 2.4 mm and a total length of 75 m for electrical insulation, cable sleeving and wire protection.
£24.49
The Partex ECHS248BLACK is a professional black 2:1 heat shrink tubing designed for electrical wire insulation, cable protection, conductor sleeving and general wiring applications. Featuring a nominal supplied diameter of 4.8 mm and a nominal fully recovered diameter of 2.4 mm, this heat shrink sleeving provides a neat, close-fitting covering around suitably sized wires, connections and electrical components.
The 2:1 shrink ratio allows the tubing to recover to approximately half its original internal diameter when heated correctly. This enables the sleeve to conform around compatible conductors, cable joints and wiring assemblies, providing an additional layer of electrical insulation while helping protect covered surfaces against abrasion and general handling wear.
Supplied in a convenient 75 m pack, the ECHS248BLACK is suitable for electrical contractors, control panel builders, equipment manufacturers and maintenance engineers requiring reliable heat shrink sleeving for repeated installation tasks. Its black finish provides a discreet, professional appearance for cable assemblies, electrical panels and equipment wiring.
The Partex ECHS248BLACK is designed to create a close-fitting protective sleeve around compatible electrical wires and components. The tubing is positioned over the required section before heat is applied evenly using suitable hot-air equipment. As it warms, the material contracts around the underlying cable or component, helping produce a tidy insulating covering and a professional finish.
With a nominal diameter of 4.8 mm before shrinking and 2.4 mm after full recovery, this tubing is suitable for applications requiring a moderate-diameter heat shrink sleeve. It should be selected so that it passes over the component before heating and contracts sufficiently to grip it afterwards. The 75 m supply length allows installers to cut sleeves to the required dimensions, supporting efficient electrical assembly, maintenance and cable protection work. The tubing should not be assumed to provide a waterproof seal unless the completed assembly has been separately designed and verified for that purpose.
Tick the specs you need, then view products that match.
| Supply Format | 75 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 2.4–4.8 mm | |
| Internal Diameter Before Shrinking (mm) | 4.8 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Black | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / SKU | ECHS248BLACK | |
| Product type | Heat shrink tubing | |
| Product category | Heat shrink sleeving and cable insulation accessories | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 4.8 mm | |
| Nominal fully recovered diameter | 2.4 mm | |
| Colour | Black | |
| Supplied length | 75 m | |
| Recovery method | Heat activated | |
| Form | Flexible tubular sleeving | |
| Application | Electrical insulation, cable sleeving and wire protection | |
| Suitable use | Compatible electrical wires, cable joints, conductor terminations and wiring assemblies | |
| HS Code | 39269097 |
The Partex ECHS248BLACK is black heat shrink tubing used for electrical wire insulation, cable protection, abrasion resistance and covering compatible conductor joints or connections.
A 2:1 shrink ratio means the tubing can recover to approximately half its original internal diameter when heated correctly. For this product, the nominal diameter changes from 4.8 mm to 2.4 mm upon full recovery.
The tubing has a nominal supplied diameter of 4.8 mm and a nominal fully recovered diameter of 2.4 mm. It should be used with wires and components that fit inside the tubing before shrinking and can be gripped securely after recovery.
The Partex ECHS248BLACK is supplied in a 75 m pack, providing tubing that can be cut into individual sleeves for electrical installation, cable assembly, manufacturing and maintenance work.
Cut the tubing to the required length, slide it over the wire or component, and apply controlled heat evenly using suitable hot-air equipment until the tubing contracts around the surface. Avoid overheating and follow appropriate electrical safety procedures.
Yes. The ECHS248BLACK can provide an additional insulating and protective covering around suitably sized electrical wires and compatible connections. The installation must still meet the applicable electrical insulation and safety requirements, and the tubing should not be used as a substitute for a correctly rated cable or connection.
Partex supplies professional cable marking, identification and installation accessories for electrical and industrial applications. The ECHS248BLACK black 2:1 heat shrink tubing combines convenient heat-activated recovery, practical wire coverage and a generous 75 m supply length to support efficient electrical insulation, cable protection and professional wiring installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.