Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS2381RED is a red 2:1 heat shrink tubing supplied in a 30 m roll, with a 38.1 mm nominal supplied diameter and 19 mm recovered diameter, designed for electrical insulation, cable protection and wire identification.
£121.65
The Partex ECHS2381RED is a versatile and reliable 2:1 heat shrink tubing designed for electrical insulation, cable protection, wire identification and professional cable management applications. Part of the Partex ECHS economy heat shrink tubing range, this red tubing provides a practical solution for protecting electrical connections, insulating conductors and organising cable assemblies in industrial, commercial and electrical installation environments.
Manufactured for general-purpose electrical protection, the tubing contracts when heated to form a close-fitting protective sleeve around cables, wires and compatible components. Its 2:1 shrink ratio allows it to reduce to approximately half its original diameter, helping provide secure coverage over cable joints, terminations and wiring assemblies. The distinctive red colour also supports cable identification and colour-coded electrical installations.
With a nominal supplied diameter of 38.1 mm, a recovered diameter of approximately 19 mm and a convenient 30 m roll, the ECHS2381RED is suitable for electrical contractors, panel builders, maintenance engineers and industrial wiring specialists. Its bulk roll format allows tubing to be cut to the required length, reducing waste and supporting efficient installation across multiple projects.
Heat shrink tubing is widely used in electrical engineering to provide insulation and mechanical protection around conductors, cable joints and wiring assemblies. When controlled heat is applied, the tubing contracts around the underlying component, creating a neat protective covering that helps reduce exposure to abrasion and handling damage.
The Partex ECHS2381RED combines a practical 2:1 shrink ratio with a generous 30 m roll length, making it particularly useful for repeated cable preparation and electrical assembly tasks. The tubing can be cut to suit individual installation requirements, while its red finish helps maintain consistent identification throughout wiring systems. For best results, select tubing that fits over the largest component before shrinking and recovers sufficiently to grip the intended cable or connection.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 19–38.1 mm | |
| Internal Diameter Before Shrinking (mm) | 38.1 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Red | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS Economy Heat Shrink Tubing | |
| Model | ECHS2381RED | |
| Product type | Heat shrinkable insulation tubing | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 38.1 mm | |
| Nominal recovered diameter | 19 mm | |
| Colour | Red | |
| Pack length | 30 m | |
| Packaging format | Continuous roll | |
| Installation method | Heat-activated shrinkage | |
| Primary function | Electrical insulation and cable protection | |
| Additional functions | Cable identification, wire bundling and abrasion protection | |
| Product category | Heat Shrink Tubing and Cable Accessories | |
| HS Code | 39269097 |
The Partex ECHS2381RED is used for electrical insulation, cable protection, wire identification and cable bundling in industrial, commercial and general electrical installations.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original diameter when sufficient heat is applied, allowing it to fit closely around suitable cables and electrical components.
The ECHS2381RED has a nominal supplied diameter of 38.1 mm and a nominal recovered diameter of approximately 19 mm.
The product is supplied as a 30 m continuous roll, allowing installers to cut individual lengths according to their wiring and cable protection requirements.
Cut the tubing to the required length, position it over the cable or connection and apply controlled heat using a suitable hot-air heat gun until the tubing contracts evenly around the component. Follow the manufacturer's installation guidance and avoid overheating.
Partex provides cable identification, marking and protection products for professional electrical installations. The ECHS2381RED red heat shrink tubing offers a practical, economical solution for insulating, protecting and organising cables in industrial wiring, panel building and maintenance applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.