ECHS2381BROWN Partex 2:1 heat shrink tubing, 38.1/19mm, brown, pack 30m

Why Choose the Partex ECHS2381BROWN 2:1 Brown Heat Shrink Tubing?

The Partex ECHS2381BROWN is a versatile 2:1 brown heat shrink tubing designed for electrical insulation, cable protection and colour-coded conductor identification in industrial and commercial electrical installations. Part of the Partex ECHS heat shrink tubing range, this protective sleeving provides a practical solution for covering electrical cables, protecting insulated connections and achieving a neat, professional finish on wiring assemblies, cable harnesses and electrical equipment.

Featuring a nominal supplied internal diameter of 38.1 mm and a nominal fully recovered internal diameter of 19 mm, the ECHS2381BROWN offers an approximately 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized cables and components, creating a close-fitting protective covering that helps reduce abrasion, mechanical wear and damage caused by routine handling. Its larger diameter makes it particularly useful for sleeving compatible multicore cables, cable bundles, insulated joints and wiring harness assemblies.

The distinctive brown finish supports clear conductor identification and organised cable management. Brown is commonly used for line conductor identification in UK and European harmonised electrical installations, making this tubing suitable for appropriate conductor marking applications. Supplied in a convenient 30 m pack, the ECHS2381BROWN is an excellent choice for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring practical heat shrink sleeving for cable preparation, electrical assembly and maintenance work.

Key Advantages

• Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
• 38.1 mm nominal supplied internal diameter accommodates appropriately sized larger cables, insulated connections and wiring assemblies.
• 19 mm nominal recovered internal diameter enables a close-fitting finish on compatible cables and components.
• Brown colour supports clear conductor identification and organised electrical wiring.
• Suitable for identifying line conductors where brown is specified by applicable wiring requirements.
• Heat-activated shrinking allows the tubing to conform around suitable electrical cables and connections.
• Helps protect cable insulation and wiring assemblies against abrasion, handling damage and mechanical wear.
• Suitable for electrical insulation, protective cable sleeving and colour-coded conductor identification.
• Useful for covering larger cable sections, insulated joints and compatible cable harness assemblies.
• Can be cut to the required length for individual cable protection and identification applications.
• Supports tidy, professional wiring installations in control panels, machinery and electrical distribution equipment.
• Convenient 30 m pack supports professional electrical installation, maintenance and production work.

Key Features

• Partex ECHS2381BROWN brown heat shrink tubing.
• 2:1 nominal shrink ratio for controlled diameter reduction when heated.
• 38.1 mm nominal supplied internal diameter.
• 19 mm nominal fully recovered internal diameter.
• Brown finish for colour-coded cable and conductor identification.
• Suitable for line conductor identification where brown is the designated colour.
• Heat-shrinkable construction for close-fitting cable and conductor sleeving.
• Suitable for protecting compatible electrical cables, insulated joints and connections.
• Provides an additional protective covering around appropriately prepared electrical assemblies.
• Useful for larger cable sections, cable bundles and wiring harness applications.
• Cut-to-length format for flexible installation and cable preparation.
• Supplied in a 30 m pack.

Reliable Electrical Insulation and Conductor Identification for Industrial Wiring

Heat shrink tubing is widely used in electrical engineering, industrial automation and control panel manufacturing to provide an insulating and protective covering around cables, electrical connections and wiring assemblies. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying cable or component. This creates a neat protective sleeve that helps reduce exposure to abrasion, handling damage and mechanical wear while supporting professional cable management.

The Partex ECHS2381BROWN 2:1 brown heat shrink tubing has a nominal internal diameter of 38.1 mm before shrinking and a nominal fully recovered diameter of 19 mm. These dimensions make it suitable for appropriately sized larger electrical cables, insulated joints, cable bundles and wiring assemblies. The brown finish provides a consistent appearance and can support conductor identification in electrical systems where brown denotes a line conductor, including suitable three-phase distribution equipment and control panel installations.

For dependable results, the tubing should have sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to achieve the required fit. Apply heat evenly using suitable equipment and avoid excessive temperatures that could damage the tubing or underlying insulation. In UK harmonised wiring systems, brown is commonly used for the line conductor in single-phase circuits and the L1 line conductor in three-phase circuits. However, conductor identification must always follow the applicable wiring standards and installation requirements. Standard heat shrink tubing should not be assumed to provide a waterproof seal unless a suitable sealing construction is specified.

Typical Applications

• Electrical cable insulation and protection.
• Brown line conductor identification in suitable electrical installations.
• Protective sleeving for appropriately sized larger cables and cable bundles.
• Covering suitable insulated electrical connections.
• Industrial control panel wiring and assembly.
• Single-phase and three-phase electrical distribution equipment.
• Electrical switchgear and power distribution wiring.
• Colour-coded cable and conductor identification.
• Industrial automation and machinery wiring.
• Electrical equipment manufacturing and assembly.
• OEM cable harness and wiring loom production.
• Electrical maintenance, repairs and refurbishment work.
• Professional cable preparation and production assembly.