Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS2381BLACK black 2:1 heat shrink tubing with a 38.1 mm supplied internal diameter and 19 mm fully recovered internal diameter, supplied in a 30 m pack for electrical insulation, cable protection and wire identification.
£121.65
The Partex ECHS2381BLACK is a versatile 2:1 heat shrink tubing designed for electrical insulation, cable protection and wire identification in industrial, commercial and electrical engineering applications. Supplied in a professional black finish, this heat shrink sleeving provides a practical solution for protecting electrical conductors, insulating cable connections and organising larger wiring assemblies.
Featuring a nominal supplied internal diameter of 38.1 mm and a fully recovered internal diameter of 19 mm, the ECHS2381BLACK offers an approximately 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized cables, conductors and electrical components, forming a close-fitting protective sleeve that supports electrical insulation and mechanical protection.
Supplied in a convenient 30 m pack, the Partex ECHS2381BLACK is particularly suitable for electrical panel builders, wiring harness manufacturers, maintenance engineers and industrial production environments. Its larger diameter makes it useful for sleeving compatible cable bundles, larger conductors and electrical assemblies, while the black finish provides a neat, consistent appearance across electrical installations.
Heat shrink tubing provides a convenient method of insulating electrical conductors, covering cable joints and protecting wiring assemblies. The Partex ECHS2381BLACK 2:1 heat shrink tubing contracts when suitable heat is applied, allowing the sleeve to conform closely to appropriately sized cables and electrical components. This helps create a neat, organised installation while providing an additional protective layer against everyday mechanical wear.
The 38.1/19 mm diameter configuration makes this tubing suitable for a range of compatible larger electrical cables, insulated connections, wiring harnesses and cable bundles. Its generous supplied diameter allows it to pass over appropriately sized components and cable assemblies before shrinking, while the black finish is useful where black sleeving is specified or a uniform wiring appearance is preferred.
For effective installation, ensure the tubing fits over the cable or component before heating and has sufficient recovery to grip it securely. Apply heat evenly using a suitable controlled heat source and follow the manufacturer's installation guidance. When covering electrical connections, ensure the completed assembly meets the applicable insulation and installation requirements. Heat shrink tubing should not be assumed to provide a waterproof seal unless the relevant sealing properties have been confirmed.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 19–38.1 mm | |
| Internal Diameter Before Shrinking (mm) | 38.1 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Black | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS | |
| Model | ECHS2381BLACK | |
| Product type | Heat shrink tubing | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 38.1 mm | |
| Nominal diameter after full recovery | 19 mm | |
| Colour | Black | |
| Installation method | Heat activated | |
| Application | Electrical insulation, cable protection and wire identification | |
| Supply length | 30 m | |
| Pack quantity | 1 × 30 m length | |
| HS Code | 39269097 |
The Partex ECHS2381BLACK is 2:1 heat shrink tubing used to insulate, protect and identify electrical cables, connections and wiring assemblies. Its larger diameter makes it particularly useful for appropriately sized cable bundles, larger conductors and electrical components in industrial and commercial installations.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered. The ECHS2381BLACK has a nominal internal diameter of 38.1 mm before shrinking and 19 mm after full recovery.
The tubing has a nominal supplied internal diameter of 38.1 mm and a fully recovered internal diameter of 19 mm. It is suitable for appropriately sized cables, cable bundles and components that fit inside the tubing before heating and allow it to grip securely after shrinking. Select the correct size according to the cable's outside diameter, any components the tubing must pass over and the required recovery.
The ECHS2381BLACK is supplied in black, making it suitable for electrical installations where black sleeving is specified. Its neutral, professional appearance is useful for maintaining a consistent finish across cable assemblies, wiring harnesses and industrial electrical equipment.
The Partex ECHS2381BLACK is supplied in a 30 m pack, providing a practical quantity for electrical panel building, wiring harness production, maintenance and other applications requiring repeated lengths of larger-diameter heat shrink tubing.
Partex provides cable identification, insulation and management products for electrical engineers, panel builders and industrial maintenance professionals. The ECHS2381BLACK 2:1 black heat shrink tubing offers a practical solution for protecting and organising larger electrical cables and wiring assemblies, with a 30 m supply length suited to installation, maintenance and production requirements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.