ECHS232YELLOW Partex 2:1 heat shrink tubing, 3.2/1.6mm, yellow, pack 150m

ECHS232YELLOW Partex 2:1 heat shrink tubing, 3.2/1.6mm, yellow, pack 150m

Partex ECHS232YELLOW is yellow 2:1 heat shrink tubing with a nominal supplied diameter of 3.2 mm, a recovered diameter of 1.6 mm and a total length of 150 m for electrical insulation, cable identification and wire protection.

SKU: ECHS232YELLOWMPN: ECHS232YELLOW
Price
List Price £55.38 ex VAT
Your Price (ex VAT) Save 20%
£44.30 20% OFF
You save £11.08 per pack Price per pack of 150
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £44.30
Trade pricing is personalised to your account

Manufacturer Lead Time

£44.30

Why Choose the Partex ECHS232YELLOW 2:1 Yellow Heat Shrink Tubing?

The Partex ECHS232YELLOW is a versatile yellow 2:1 heat shrink tubing designed for electrical wire insulation, cable identification, conductor protection and professional wiring applications. Featuring a nominal supplied diameter of 3.2 mm and a nominal fully recovered diameter of 1.6 mm, this heat shrink sleeving provides a neat, close-fitting covering when correctly heated around suitably sized wires and components.

The 2:1 shrink ratio allows the tubing to recover to approximately half its original internal diameter when exposed to suitable heat. This enables the sleeving to conform around compatible electrical conductors, small cable joints and wiring assemblies, providing an additional insulating layer while helping protect covered wiring against abrasion and general handling wear.

Supplied in a generous 150 m pack, the ECHS232YELLOW is particularly suitable for electrical contractors, control panel builders, equipment manufacturers and maintenance engineers who require consistent heat shrink sleeving for repeated installation tasks. Its distinctive yellow finish supports visual cable identification and organised wiring systems in electrical, electronic and industrial applications.

Key Advantages

  • 2:1 heat shrink ratio allows the tubing to recover to approximately half its original supplied diameter.
  • 3.2 mm nominal supplied diameter accommodates compatible small electrical wires and components.
  • 1.6 mm nominal fully recovered diameter provides a close-fitting sleeve after correct heat application.
  • Bright yellow colour supports visual wire identification and organised cable management.
  • Provides an additional layer of electrical insulation around compatible conductors and connections.
  • Helps protect covered wiring against abrasion and general mechanical handling.
  • Flexible tubing can be cut to the required length for individual installation tasks.
  • Heat-activated recovery creates a tidy finish without conventional tape wrapping.
  • 150 m pack quantity supports repetitive production, panel assembly and maintenance work.
  • Suitable for electrical, electronic, industrial and general cable management applications.

Key Features

  • Partex ECHS232YELLOW heat shrink tubing.
  • 2:1 shrink ratio.
  • Nominal supplied diameter of 3.2 mm.
  • Nominal fully recovered diameter of 1.6 mm.
  • Distinctive yellow colour for cable identification applications.
  • Heat-activated shrinking for a close-fitting covering.
  • Suitable for compatible electrical conductors and wiring assemblies.
  • Provides an additional layer of electrical insulation.
  • Helps protect wires and compatible cable joints against abrasion.
  • Can be cut into individual sleeves to suit installation requirements.
  • Suitable for installation using controlled hot-air heating equipment.
  • Total supplied length: 150 m.

Reliable 2:1 Heat Shrink Protection and Yellow Cable Identification

The Partex ECHS232YELLOW is designed to create a close-fitting protective sleeve around compatible electrical wires and components. The tubing is positioned over the required section before heat is applied evenly using suitable hot-air equipment. As it warms, the material contracts around the underlying cable or component, helping produce a tidy insulating cover and a professional finish.

With a nominal diameter of 3.2 mm before shrinking and 1.6 mm after full recovery, this tubing is suitable for applications requiring relatively fine heat shrink sleeving. It should be selected so that it fits over the component before heating and contracts sufficiently to grip it afterwards. Its yellow finish can support cable identification schemes, while the 150 m supply length allows installers to cut sleeves to the required dimensions for efficient electrical assembly and maintenance work.

Typical Applications

  • Electrical wire insulation and identification.
  • Control panel wiring and cable organisation.
  • Electronic equipment assembly and repair.
  • Small conductor and cable joint covering.
  • Industrial automation and instrumentation wiring.
  • Electrical equipment manufacturing and maintenance.
  • Protection of compatible wire terminations and connections.
  • Colour-coded wiring systems and cable management.
  • Machinery wiring and electrical harness assembly.
  • Workshop electrical repairs and cable assembly production.

Technical Specifications

Tick the specs you need, then view products that match.

Supply Format 150 m
Device Type Heat-shrink tubing
Material Polyolefin
Cable Diameter (mm) 1.6–3.2 mm
Internal Diameter Before Shrinking (mm) 3.2 mm
Shrink Ratio 2:1
Colour Yellow
Adhesive Lined No
Manufacturer Partex
Model / SKU ECHS232YELLOW
Product type Heat shrink tubing
Product category Heat shrink sleeving and cable insulation accessories
Shrink ratio 2:1
Nominal diameter before shrinking 3.2 mm
Nominal fully recovered diameter 1.6 mm
Colour Yellow
Supplied length 150 m
Recovery method Heat activated
Form Flexible tubular sleeving
Application Electrical insulation, wire identification and cable protection
Suitable use Compatible electrical wires, cable joints and wiring assemblies
HS Code 39269097

Frequently Asked Questions

What is the Partex ECHS232YELLOW used for?

The Partex ECHS232YELLOW is yellow heat shrink tubing used for electrical wire insulation, cable identification, abrasion protection and covering compatible wire joints or connections.

What does the 2:1 shrink ratio mean?

A 2:1 shrink ratio means the tubing can recover to approximately half its original internal diameter when heated correctly. For this product, the nominal diameter changes from 3.2 mm to 1.6 mm upon full recovery.

What size is the Partex ECHS232YELLOW tubing?

The tubing has a nominal supplied diameter of 3.2 mm and a nominal fully recovered diameter of 1.6 mm. It is intended for suitably sized electrical wires, cable assemblies and components.

How much heat shrink tubing is supplied?

The Partex ECHS232YELLOW is supplied in a 150 m pack, providing a substantial length of tubing that can be cut into individual sleeves for electrical installation, manufacturing and maintenance work.

How is the ECHS232YELLOW heat shrink tubing installed?

Cut the tubing to the required length, slide it over the wire or component, and apply controlled heat evenly using suitable hot-air equipment until the tubing contracts around the surface. Avoid overheating and follow appropriate electrical safety procedures.

Can yellow heat shrink tubing be used for wire identification?

Yes. The yellow finish can be used as part of an organised cable identification system. However, conductor identification must comply with applicable wiring standards, and yellow sleeving should not be assumed to indicate a particular conductor function without reference to the installation's identification scheme.

Trusted Cable Identification and Protection Solutions from Partex

Partex supplies professional cable marking, identification and installation accessories for electrical and industrial applications. The ECHS232YELLOW yellow 2:1 heat shrink tubing combines convenient heat-activated recovery, practical wire coverage and a generous 150 m supply length to support efficient electrical insulation, cable identification and wiring protection.