Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ECHS232CLEAR Partex 2:1 heat shrink tubing, 3.2/1.6mm, clear, pack 150m
Partex ECHS232CLEAR transparent 2:1 heat shrink tubing with a 3.2 mm supplied diameter and 1.6 mm fully recovered diameter, designed for electrical insulation, visible wire identification and cable protection, supplied in a 150 m pack.
£44.30
Why Choose the Partex ECHS232CLEAR 2:1 Heat Shrink Tubing?
The Partex ECHS232CLEAR is a versatile 2:1 heat shrink tubing designed for electrical insulation, wire identification, cable protection and professional cable management. Supplied in a clear, transparent finish, this heat shrink sleeve has a nominal supplied diameter of 3.2 mm and a fully recovered diameter of 1.6 mm, making it suitable for small-diameter wires, conductors and electrical connections.
Designed for dependable electrical installation and cable management, the ECHS232CLEAR contracts when heated, forming a close-fitting protective sleeve around compatible cables and components. Its 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter, helping provide a neat and secure finish for electrical wiring and cable assemblies. The transparent construction allows underlying wire colours, identification markings and components to remain visible.
With a 3.2/1.6 mm diameter specification and a generous 150 m pack length, the Partex ECHS232CLEAR is particularly suitable for electrical panel builders, wiring harness manufacturers, maintenance engineers and OEM production environments. Its clear finish makes it especially useful for protecting cable identification markings and labels without obscuring them, while the long supply length supports repeated cutting and installation.
Key Advantages
- Versatile 2:1 heat shrink tubing for electrical insulation and cable protection.
- 3.2 mm supplied diameter suitable for small electrical conductors and cable assemblies.
- 1.6 mm fully recovered diameter for a close-fitting finish on compatible components.
- Clear, transparent construction allows underlying cable colours and identification markings to remain visible.
- Heat-activated shrinking provides a neat, professional cable finish.
- Helps protect covered wiring and identification markings against abrasion and everyday handling.
- Suitable for electrical control panels, wiring harnesses and industrial automation equipment.
- 150 m pack length ideal for workshop use, panel building and repeated production requirements.
Key Features
- Partex ECHS232CLEAR heat shrink tubing.
- 2:1 heat shrink ratio.
- 3.2 mm nominal diameter before shrinking.
- 1.6 mm nominal fully recovered diameter.
- Clear, transparent finish for visible cable identification and electrical connections.
- Heat-shrinkable sleeve for cable insulation and protection.
- Suitable for compatible small-diameter wires and conductors.
- Can be cut to the required length for individual installations.
- Useful for covering compatible cable identification labels and markings.
- Suitable for industrial electrical assembly and maintenance applications.
- Supplied in a 150 m pack for high-volume use.
Reliable Electrical Insulation and Cable Protection
Heat shrink tubing provides a practical method of insulating, identifying and protecting electrical wires and cable assemblies. The Partex ECHS232CLEAR is designed to shrink when heat is applied, allowing the sleeve to conform closely to compatible conductors and components. Its 2:1 shrink ratio makes it useful for applications requiring a compact, tidy and professional cable finish.
The ECHS232CLEAR is particularly suitable for electrical panel builders, automation engineers and wiring harness manufacturers working with small-diameter conductors. Its transparent finish is beneficial where existing cable colours, identification labels or printed markings need to remain visible beneath the protective sleeve. The 150 m supply length supports efficient preparation of multiple cable assemblies. For best results, the tubing should be selected according to the component diameter and heated evenly using a suitable heat gun, following the manufacturer's installation guidance.
Typical Applications
- Electrical wire insulation and cable protection.
- Protection of cable identification labels and printed wire markings.
- Industrial electrical control panels and cabinets.
- PLC wiring and industrial automation equipment.
- Wiring harness manufacturing and cable assembly.
- Protection of compatible small electrical connections.
- OEM electrical equipment manufacturing.
- Electrical maintenance, repair and workshop applications.
- Transparent protective sleeving where underlying cable identification must remain visible.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 150 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 1.6–3.2 mm | |
| Internal Diameter Before Shrinking (mm) | 3.2 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Clear | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model | ECHS232CLEAR | |
| Product type | Heat shrink tubing | |
| Product category | Electrical insulation and cable protection | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 3.2 mm | |
| Nominal fully recovered diameter | 1.6 mm | |
| Diameter specification | 3.2/1.6 mm | |
| Colour | Clear | |
| Appearance | Transparent | |
| Shrinking method | Heat activated | |
| Application | Electrical insulation, wire identification and cable protection | |
| Installation method | Slide over compatible cable or component and apply controlled heat | |
| Supplied length | 150 m | |
| Pack quantity | 1 pack containing 150 m of tubing | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex ECHS232CLEAR used for?
The Partex ECHS232CLEAR is clear heat shrink tubing used for electrical insulation, cable protection, wire identification and the finishing of compatible electrical cable assemblies. Its transparent finish allows underlying cable colours and identification markings to remain visible.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can shrink to approximately half its original internal diameter when fully recovered. The ECHS232CLEAR has a nominal supplied diameter of 3.2 mm and a fully recovered diameter of 1.6 mm.
What size cable is the ECHS232CLEAR suitable for?
The tubing has a nominal starting diameter of 3.2 mm and a recovered diameter of 1.6 mm. It is intended for suitably sized small-diameter cables and components. The tubing must fit over the component before heating and be capable of shrinking sufficiently to provide the required fit.
Can the Partex ECHS232CLEAR protect cable identification labels?
Yes. The clear, transparent finish makes the ECHS232CLEAR suitable for covering compatible cable identification labels and markings while allowing them to remain visible. The label material and tubing dimensions should be checked for compatibility with the heat-shrinking process.
How much heat shrink tubing is supplied in one pack?
The Partex ECHS232CLEAR is supplied in a 150 m pack, making it suitable for electrical workshops, control panel assembly, wiring harness production and repeated maintenance applications.
Trusted Cable Identification and Protection Solutions from Partex
Partex supplies professional cable identification, insulation and cable management products for electrical and industrial applications. The ECHS232CLEAR transparent 2:1 heat shrink tubing provides a practical solution for protecting small-diameter electrical wiring while preserving the visibility of cable identification markings, with a 3.2/1.6 mm diameter specification and a convenient 150 m supply length for panel builders, electricians and OEM manufacturers.
