Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ECHS2254RED Partex 2:1 heat shrink tubing, 25.4/12.7mm, red, pack 30m
Partex ECHS2254RED red 2:1 heat shrink tubing with a 25.4 mm supplied diameter and 12.7 mm fully recovered diameter, designed for electrical insulation, cable identification and cable protection, supplied in a 30 m pack.
£64.02
Why Choose the Partex ECHS2254RED 2:1 Heat Shrink Tubing?
The Partex ECHS2254RED is a professional 2:1 heat shrink tubing designed for electrical insulation, cable protection, wire identification and cable management. Supplied in red, this heat shrink sleeve has a nominal supplied diameter of 25.4 mm and a nominal fully recovered diameter of 12.7 mm, making it suitable for compatible larger electrical cables, conductors and wiring assemblies.
Designed for electrical installation, industrial panel building and cable assembly, the ECHS2254RED contracts when heated to form a close-fitting sleeve around appropriately sized cables and components. Its 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter, helping create a neat, professional finish while providing an additional protective covering for electrical wiring.
With a 25.4/12.7 mm diameter specification and a convenient 30 m pack length, the Partex ECHS2254RED is particularly suitable for electrical panel builders, wiring harness manufacturers, maintenance engineers and OEM production environments. Its red finish supports clear visual identification within appropriately designed cable marking systems, while the supplied length allows installers to cut sections to suit individual applications.
Key Advantages
- Professional 2:1 heat shrink tubing for electrical insulation and cable protection.
- 25.4 mm supplied diameter suitable for compatible larger electrical cables and wiring assemblies.
- 12.7 mm fully recovered diameter for a close-fitting finish on appropriately sized components.
- Red colour supports visible cable identification and colour-coded wiring systems.
- Heat-activated shrinking creates a neat, professional sleeve without separate fastening components.
- Helps protect covered cable sections against abrasion and everyday handling.
- Suitable for electrical control panels, industrial machinery and wiring harness applications.
- 30 m pack length supports workshop use, panel building and repeated installation requirements.
- Can be cut to the required length for flexible installation and efficient material use.
Key Features
- Partex ECHS2254RED heat shrink tubing.
- 2:1 heat shrink ratio.
- 25.4 mm nominal diameter before shrinking.
- 12.7 mm nominal fully recovered diameter.
- Red finish for visible cable identification and colour-coded applications.
- Heat-shrinkable sleeve for electrical insulation and cable protection.
- Suitable for compatible larger electrical cables, conductors and cable assemblies.
- Provides an additional protective covering over appropriately sized cable sections.
- Can be cut to length for individual installations and cable assemblies.
- Supports tidy and organised wiring within electrical equipment.
- Suitable for industrial electrical assembly, manufacturing and maintenance.
- Supplied in a 30 m pack for professional use.
Reliable Electrical Insulation and Cable Protection
Heat shrink tubing provides a practical method of insulating, identifying and protecting electrical cables, wiring assemblies and compatible electrical connections. The Partex ECHS2254RED contracts when heat is applied, allowing the sleeve to conform closely to appropriately sized cables and components. Its 2:1 shrink ratio makes it useful for installations requiring a compact protective covering and a clean, professional cable finish.
The red finish provides clear visual distinction within a planned cable identification system, making the tubing useful for industrial equipment, control panels and wiring harnesses. However, red sleeving should only be used for conductor identification where permitted by applicable wiring regulations. Colour alone must not be relied upon to determine whether a conductor is live, isolated or safe to work on.
The ECHS2254RED is particularly useful for electrical panel builders, automation engineers and maintenance professionals working with larger cable assemblies that require protective sleeving. Its 30 m supply length enables installers to prepare multiple sections for different applications. For best results, select the tubing according to the cable's outside diameter, ensure it can pass over the component before shrinking and apply heat evenly using a suitable heat gun. Always follow the manufacturer's installation guidance and verify that the tubing meets the electrical and environmental requirements of the intended application.
Typical Applications
- Electrical cable insulation and protection.
- Colour-coded cable and conductor identification where appropriate.
- Industrial electrical control panels and cabinets.
- PLC wiring and industrial automation equipment.
- Wiring harness manufacturing and cable assembly.
- Protective sleeving for compatible larger cable connections.
- OEM electrical equipment and machinery manufacturing.
- Electrical maintenance, repair and workshop applications.
- Cable management in industrial machinery and control systems.
- Professional finishing of suitably sized cable assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Red | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model | ECHS2254RED | |
| Product type | Heat shrink tubing | |
| Product category | Electrical insulation and cable protection | |
| Shrink ratio | 2:1 | |
| Nominal supplied diameter | 25.4 mm | |
| Nominal fully recovered diameter | 12.7 mm | |
| Diameter specification | 25.4/12.7 mm | |
| Colour | Red | |
| Shrinking method | Heat activated | |
| Application | Electrical insulation, cable identification and cable protection | |
| Installation method | Slide over a compatible cable or component and apply controlled heat | |
| Supplied length | 30 m | |
| Pack quantity | 1 pack containing 30 m of tubing | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex ECHS2254RED used for?
The Partex ECHS2254RED is red heat shrink tubing used for electrical insulation, cable protection, wire identification and the professional finishing of compatible electrical cables and wiring assemblies.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered. The ECHS2254RED has a nominal supplied diameter of 25.4 mm and a specified fully recovered diameter of 12.7 mm.
What size cable is the ECHS2254RED suitable for?
The tubing has a nominal supplied diameter of 25.4 mm and a fully recovered diameter of 12.7 mm. It should be selected for cables or components that the tubing can pass over before heating and grip adequately after shrinking. Check the cable's outside diameter, including any connectors or components the sleeve must pass over.
Can the red tubing be used for cable identification?
Yes. The red finish can help distinguish cables and wiring assemblies within an appropriate colour-coding system. However, conductor colours must comply with the applicable electrical wiring regulations and site identification requirements. Red sleeving should not be assumed to indicate a particular electrical function without reference to the relevant wiring standard.
How much heat shrink tubing is supplied in one pack?
The Partex ECHS2254RED is supplied in a 30 m pack, making it suitable for electrical workshops, control panel assembly, wiring harness production and repeated industrial maintenance applications.
Trusted Cable Identification and Protection Solutions from Partex
Partex supplies professional cable identification, insulation and cable management products for electrical and industrial applications. The ECHS2254RED red 2:1 heat shrink tubing provides a practical solution for insulating, protecting and identifying compatible electrical cables, with a 25.4/12.7 mm diameter specification and a convenient 30 m supply length for panel builders, electricians, maintenance engineers and OEM manufacturers.
