Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS2254GREY is grey 2:1 heat shrink tubing with a nominal supplied diameter of 25.4 mm and recovered diameter of 12.7 mm for electrical cable insulation, protection and conductor identification, supplied in a 30 m pack.
£64.02
The Partex ECHS2254GREY is a grey 2:1 heat shrink tubing product designed for electrical cable insulation, conductor identification and protection of cable connections. Featuring a nominal supplied diameter of 25.4 mm and a nominal fully recovered diameter of 12.7 mm, this tubing provides a practical solution for larger cable assemblies, electrical installations, control panel wiring and industrial maintenance applications.
With its 2:1 shrink ratio, the ECHS2254GREY is designed to reduce to approximately half its original diameter when correctly heated and allowed to recover. This enables the tubing to conform around appropriately sized cables, cable joints and components, creating a neat protective covering. Its distinctive grey colour supports visual cable identification and organised electrical wiring arrangements, including line conductor identification where applicable.
Supplied in a convenient 30 m pack, the Partex ECHS2254GREY is suitable for electrical contractors, panel builders, cable assembly manufacturers and maintenance engineers requiring larger-diameter grey heat shrink sleeving for installation, repair and production work.
The Partex ECHS2254GREY provides a practical method of insulating and identifying electrical cables using heat-activated tubing. Its nominal supplied diameter of 25.4 mm allows it to be positioned over appropriately sized cables, connections and components, while its 2:1 nominal recovery ratio enables the tubing to shrink towards a nominal recovered diameter of 12.7 mm when sufficient heat is applied.
For effective installation, the tubing should be selected according to the outside diameter of the item being covered, cut to the required length and heated evenly using suitable equipment. The grey colour can support an established electrical conductor identification scheme, including the identification of the L3 line conductor in installations following applicable UK three-phase wiring conventions. The 30 m supply quantity makes it convenient for workshops and production environments. Applications requiring specific dielectric ratings, operating temperatures, flame classifications, adhesive sealing or environmental certifications should be checked against the relevant Partex product specifications before installation.
Tick the specs you need, then view products that match.
| Supply Format | 30 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 12.7–25.4 mm | |
| Internal Diameter Before Shrinking (mm) | 25.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Grey | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Model / SKU | ECHS2254GREY | |
| Product name | 2:1 Heat Shrink Tubing 25.4/12.7 mm Grey | |
| Product type | Heat shrink tubing | |
| Product series | ECHS | |
| Nominal shrink ratio | 2:1 | |
| Nominal supplied diameter | 25.4 mm | |
| Nominal recovered diameter | 12.7 mm | |
| Colour | Grey | |
| Recovery method | Application of heat | |
| Product form | Tubular sleeving | |
| Supplied quantity | 30 m | |
| Primary application | Electrical cable insulation, protection and identification | |
| Product category | Heat Shrink Tubing | |
| HS Code | 39269097 |
The Partex ECHS2254GREY is grey heat shrink tubing used for insulating, identifying and protecting suitably sized electrical cables, connections and components.
A 2:1 shrink ratio means the tubing is designed to recover to approximately half its original diameter when correctly heated. The nominal diameters for this product are 25.4 mm before shrinking and 12.7 mm after full recovery.
The tubing has a nominal supplied diameter of 25.4 mm and a nominal fully recovered diameter of 12.7 mm.
The tubing is supplied in grey, making it suitable for visual identification of electrical cables and conductors within an established colour-coding scheme.
The specified pack quantity is 30 m of grey Partex ECHS2254GREY heat shrink tubing.
Yes. The tubing can be cut into suitable lengths before being positioned over the cable, connection or component and heated to achieve the required fit.
Select tubing that fits over the item before shrinking, cut it to the required length and apply heat evenly using suitable equipment. Follow the manufacturer's recommended heating and installation conditions.
Yes. Grey tubing can be used within an appropriate electrical conductor identification system. In UK three-phase installations, grey is conventionally associated with the L3 line conductor. All conductor identification must comply with applicable wiring standards.
The tubing has a nominal supplied diameter of 25.4 mm and a nominal fully recovered diameter of 12.7 mm. Select it for items that can pass through the tubing before heating and are large enough for the tubing to recover securely around them. Allow for dimensional tolerances and any enlarged connection sections.
The specified product information identifies the tubing's dimensions, colour, shrink ratio and pack quantity but does not confirm an adhesive lining. Applications requiring adhesive-lined tubing should use a product with that feature explicitly specified.
Waterproof sealing is not established by the supplied specifications. Where moisture sealing is required, select tubing with a verified sealing construction and an appropriate manufacturer rating.
Yes. Its 25.4 mm nominal supplied diameter makes it suitable for larger cable assemblies than smaller-diameter heat shrink tubing, provided the item fits through the tubing and its dimensions permit a secure recovered fit.
Both products are 2:1 heat shrink tubing with nominal supplied and recovered diameters of 25.4/12.7 mm and a 30 m pack quantity. The ECHS2254GREY is grey, while the ECHS2254GREEN is green, allowing selection according to the required cable identification scheme.
Partex cable identification and insulation products provide practical solutions for electrical installation, control panel assembly and industrial wiring applications. The ECHS2254GREY 2:1 heat shrink tubing combines a larger 25.4/12.7 mm diameter specification, distinctive grey colouring and a convenient 30 m pack quantity, making it a practical choice for electrical contractors, panel builders, cable harness manufacturers and maintenance engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.