Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS224YELLOW yellow 2:1 heat shrink tubing with a 2.4 mm supplied internal diameter and 1.2 mm recovered internal diameter, supplied in a 150 m pack for electrical insulation, cable protection and colour-coded wire identification.
£33.74
The Partex ECHS224YELLOW is a versatile and practical 2:1 yellow heat shrink tubing designed for electrical insulation, cable protection and wire identification in industrial and commercial electrical installations. Part of the Partex ECHS heat shrink tubing range, this sleeving provides a convenient solution for protecting small electrical conductors, insulating connections and creating a neat, professional finish on cable assemblies.
Featuring a nominal supplied internal diameter of 2.4 mm and a fully recovered internal diameter of approximately 1.2 mm, the ECHS224YELLOW offers a 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized conductors and components, creating a close-fitting protective covering that helps reduce abrasion and mechanical wear.
The distinctive yellow finish provides a highly visible colour for cable identification and organised wiring installations. Supplied in a generous 150 m pack, the ECHS224YELLOW is particularly suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring consistent cable sleeving across multiple electrical assemblies.
Heat shrink tubing is widely used in electrical engineering and industrial automation to provide an insulating and protective covering around wires, electrical connections and small components. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying conductor or assembly. This creates a neat protective covering that helps reduce exposure to abrasion, handling damage and mechanical wear.
The Partex ECHS224YELLOW 2:1 yellow heat shrink tubing has a nominal internal diameter of 2.4 mm before shrinking and a nominal fully recovered diameter of 1.2 mm. This makes it suitable for small-diameter electrical wires, compatible soldered joints and electronic connections. The yellow finish provides clear visual identification, helping installers organise wiring and distinguish designated conductors or cable groups within electrical equipment.
For dependable results, the tubing should be selected with sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to achieve the required fit. Heat should be applied evenly using suitable equipment, avoiding excessive temperatures that could damage the tubing or underlying insulation. Yellow sleeving should be used in accordance with the applicable conductor identification requirements, and standard heat shrink tubing should not be assumed to provide a waterproof seal unless an appropriate sealing construction is specified.
Tick the specs you need, then view products that match.
| Supply Format | 150 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 1.2–2.4 mm | |
| Internal Diameter Before Shrinking (mm) | 2.4 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Yellow | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS Heat Shrink Tubing | |
| Model | ECHS224YELLOW | |
| Product type | Heat shrink tubing | |
| Product category | Heat Shrink Sleeving and Cable Protection | |
| Shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 2.4 mm | |
| Nominal fully recovered internal diameter | 1.2 mm | |
| Colour | Yellow | |
| Operating principle | Heat-activated diameter reduction | |
| Application | Electrical insulation, cable protection and wire identification | |
| Installation method | Position over the component and apply controlled heat | |
| Format | Cut-to-length heat shrink tubing | |
| Pack length | 150 m | |
| Manufacturer SKU | ECHS224YELLOW | |
| HS Code | 39269097 |
The Partex ECHS224YELLOW is used for electrical insulation, protection of small wires and connections, cable sleeving and colour-coded wire identification. It is suitable for control panel wiring, electronics, industrial automation and cable assembly applications.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered under suitable heating conditions. The ECHS224YELLOW has a nominal supplied internal diameter of 2.4 mm and a nominal recovered internal diameter of 1.2 mm.
Yellow heat shrink tubing provides a highly visible covering for suitable electrical conductors and cable assemblies. It can help with wire identification, colour coding and organised wiring, provided the selected colour complies with the applicable electrical identification requirements.
Cut the tubing to the required length, slide it over the wire or component and apply controlled heat evenly using a suitable heat gun. The tubing contracts around the component as it heats. Ensure the selected tubing dimensions are compatible with the assembly and avoid overheating the underlying insulation.
The Partex ECHS224YELLOW is supplied in a 150 m pack, providing a practical quantity for industrial wiring, electronics assembly, cable harness manufacturing and electrical maintenance work.
Partex cable identification and installation accessories provide practical solutions for electrical engineers, industrial maintenance teams and control panel manufacturers. The ECHS224YELLOW yellow 2:1 heat shrink tubing combines convenient installation, clear visual identification and dependable cable sleeving for professional electrical wiring and assembly applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.