Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS2191GREEN green 2:1 heat shrink tubing with a 19.1 mm supplied internal diameter and 9.5 mm recovered internal diameter, supplied in a 50 m pack for electrical insulation, cable protection and colour-coded cable identification.
£61.95
The Partex ECHS2191GREEN is a versatile 2:1 green heat shrink tubing designed for electrical insulation, cable protection and colour-coded identification in industrial and commercial electrical installations. Part of the Partex ECHS heat shrink tubing range, this sleeving provides a practical solution for protecting electrical conductors, covering cable connections and achieving a neat, professional finish on wiring assemblies, cable harnesses and electrical equipment.
Featuring a nominal supplied internal diameter of 19.1 mm and a nominal fully recovered internal diameter of 9.5 mm, the ECHS2191GREEN offers an approximately 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized cables and components, creating a close-fitting protective covering that helps reduce abrasion, mechanical wear and damage caused by routine handling. Its larger diameter makes it particularly useful for sleeving compatible cable bundles, insulated connections and wiring assemblies.
The distinctive green finish supports visible cable identification and organised wiring systems where green is an appropriate designated colour. Supplied in a convenient 50 m pack, the ECHS2191GREEN is suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring practical heat shrink sleeving for cable preparation, electrical assembly and maintenance applications.
Heat shrink tubing is widely used in electrical engineering, industrial automation and control panel manufacturing to provide an insulating and protective covering around cables, electrical connections and wiring assemblies. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying cable or component. This creates a neat protective sleeve that helps reduce exposure to abrasion, handling damage and mechanical wear while supporting professional cable management.
The Partex ECHS2191GREEN 2:1 green heat shrink tubing has a nominal internal diameter of 19.1 mm before shrinking and a nominal fully recovered diameter of 9.5 mm. These dimensions make it suitable for appropriately sized electrical cables, insulated joints, cable bundles and wiring assemblies. The green finish provides a consistent appearance and can support designated cable identification schemes in industrial equipment, machinery and electrical control systems.
For dependable results, the tubing should have sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to achieve the required fit. Apply heat evenly using suitable equipment and avoid excessive temperatures that could damage the tubing or underlying insulation. Green-only sleeving must not be used as a substitute for green/yellow protective conductor identification in installations where green/yellow marking is required. Colour selection must follow applicable electrical wiring standards, and standard heat shrink tubing should not be assumed to provide a waterproof seal unless a suitable sealing construction is specified.
Tick the specs you need, then view products that match.
| Supply Format | 50 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 9.5–19.1 mm | |
| Internal Diameter Before Shrinking (mm) | 19.1 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS Heat Shrink Tubing | |
| Model | ECHS2191GREEN | |
| Product type | Heat shrink tubing | |
| Product category | Heat Shrink Sleeving and Cable Protection | |
| Nominal shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 19.1 mm | |
| Nominal fully recovered internal diameter | 9.5 mm | |
| Colour | Green | |
| Operating principle | Heat-activated diameter reduction | |
| Application | Electrical insulation, cable protection and colour-coded cable identification | |
| Installation method | Position over the cable or component and apply controlled heat | |
| Format | Cut-to-length heat shrink tubing | |
| Pack length | 50 m | |
| Manufacturer SKU | ECHS2191GREEN | |
| HS Code | 39269097 |
The Partex ECHS2191GREEN is used for electrical insulation, cable protection, connection sleeving and colour-coded cable identification. Its nominal 19.1 mm supplied internal diameter makes it suitable for appropriately sized cables, insulated connections and cable harness assemblies.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered under suitable heating conditions. The ECHS2191GREEN has a nominal supplied internal diameter of 19.1 mm and a nominal recovered internal diameter of 9.5 mm.
Green-only heat shrink tubing should not be used as a substitute for green/yellow protective conductor identification where green/yellow marking is required by applicable electrical wiring standards. The ECHS2191GREEN is suitable for other colour-coded cable identification applications where green is an appropriate designated colour.
Cut the tubing to the required length, slide it over the cable or component and apply controlled heat evenly using a suitable heat gun. The tubing contracts around the component as it heats. Ensure the selected tubing dimensions are compatible with the assembly and avoid overheating the tubing or underlying cable insulation.
The Partex ECHS2191GREEN is supplied in a 50 m pack, providing a practical quantity for industrial wiring, cable harness manufacturing, electrical panel assembly and maintenance applications.
Partex cable identification and installation accessories provide practical solutions for electrical engineers, industrial maintenance teams and control panel manufacturers. The ECHS2191GREEN green 2:1 heat shrink tubing combines convenient installation, visible cable identification and practical protective sleeving for professional electrical wiring, cable harness production and industrial maintenance applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.