Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ECHS2127EARTH(GRN/YEL) Partex 2:1 heat shrink tubing, 12.7/6.3mm, green/yellow, pack 50m
Partex ECHS2127EARTH(GRN/YEL) green/yellow heat shrink tubing with a 2:1 shrink ratio, 12.7 mm supplied diameter, 6.3 mm recovered diameter and 50 m pack length for protective earth conductor identification and cable protection.
£31.67
Why Choose the Partex ECHS2127EARTH(GRN/YEL) 2:1 Green/Yellow Heat Shrink Tubing?
The Partex ECHS2127EARTH(GRN/YEL) is a practical and reliable green/yellow heat shrink tubing designed for protective earth conductor identification, electrical insulation and cable protection in industrial and commercial electrical installations. Featuring a 2:1 shrink ratio and nominal diameters of 12.7 mm before shrinking and 6.3 mm after shrinking, this tubing provides a convenient solution for identifying and protecting suitable earthing conductors and electrical connections.
As part of the Partex ECHS heat shrink tubing range, the ECHS2127EARTH(GRN/YEL) contracts when heat is applied, forming a close-fitting protective sleeve around compatible conductors and cable components. Its distinctive green/yellow colour combination is intended for protective earth identification, helping electricians, control panel builders and maintenance engineers distinguish protective conductors from other wiring within electrical systems.
Supplied in a convenient 50 m pack, the ECHS2127EARTH(GRN/YEL) is particularly suitable for electrical contractors, industrial panel builders and OEM equipment manufacturers requiring consistent earth conductor identification. Its 12.7 mm supplied diameter and 6.3 mm recovered diameter make it suitable for a range of compatible conductor sizes and electrical wiring assemblies.
Key Advantages
- 2:1 heat shrink ratio provides effective diameter reduction for close-fitting conductor identification and protection.
- 12.7 mm supplied diameter reduces to approximately 6.3 mm after unrestricted shrinking.
- Green/yellow colour combination supports clear identification of protective earth conductors.
- 50 m pack length provides a convenient supply for repeated electrical installation and maintenance tasks.
- Helps protect suitable insulated conductors and electrical connections against abrasion and mechanical handling.
- Supports consistent protective earth identification within control panels and electrical distribution systems.
- Can be cut to the required length for individual conductors, terminations and wiring assemblies.
- Suitable for industrial automation, machinery wiring, switchgear and electrical panel building.
Key Features
- Partex ECHS heat shrink tubing series.
- Product reference: ECHS2127EARTH(GRN/YEL).
- 2:1 shrink ratio for controlled diameter reduction when heated.
- 12.7 mm nominal supplied diameter.
- 6.3 mm nominal recovered diameter.
- Green/yellow identification colouring for protective earth conductors.
- 50 m pack length for professional electrical installation requirements.
- Flexible tubular format suitable for cutting into application-specific lengths.
- Heat-activated shrinking provides a close-fitting sleeve around compatible conductors and components.
- Suitable for protective earth identification, additional electrical insulation and cable protection.
Reliable Protective Earth Identification for Industrial Electrical Systems
Protective earth conductors play an important role in electrical safety by providing a connection between exposed conductive parts and the protective earthing system. Clear identification of these conductors helps electricians and maintenance engineers recognise protective connections during installation, inspection and servicing. Green/yellow sleeving is used for this purpose in accordance with applicable electrical identification requirements.
The Partex ECHS2127EARTH(GRN/YEL) combines a practical 2:1 shrink ratio with distinctive green/yellow colouring, making it suitable for identifying protective earth conductors within industrial control cabinets, electrical distribution equipment and machinery wiring systems. When heated evenly, the tubing contracts around the conductor or compatible component to provide a close-fitting identification sleeve with additional protection against abrasion and handling.
For electrical contractors, automation engineers and control panel manufacturers, the 50 m pack provides a convenient supply for repeated protective earth identification tasks. The tubing can be cut into shorter sections to suit individual conductors and terminations. The correct size should be selected to ensure adequate clearance before shrinking and a suitable recovered diameter, while the finished installation must comply with applicable electrical wiring and protective conductor identification standards.
Typical Applications
- Protective earth conductor identification in electrical installations.
- Green/yellow sleeving for compatible earthing conductors and terminations.
- Industrial control panel and switchgear wiring.
- Electrical distribution boards and protective earthing systems.
- Industrial machinery and automation equipment wiring.
- Identification of protective bonding conductors where applicable.
- Electrical maintenance, servicing and wiring refurbishment.
- OEM equipment manufacturing and industrial electrical panel building.
Technical Specifications
Tick the specs you need, then view products that match.
| Supply Format | 50 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 6.3–12.7 mm | |
| Internal Diameter Before Shrinking (mm) | 12.7 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Green/Yellow | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS Heat Shrink Tubing | |
| Model | ECHS2127EARTH(GRN/YEL) | |
| Product type | Heat shrink tubing / earth identification sleeving | |
| Shrink ratio | 2:1 | |
| Nominal diameter before shrinking | 12.7 mm | |
| Nominal diameter after shrinking | 6.3 mm | |
| Colour | Green / Yellow | |
| Pack length | 50 m | |
| Installation method | Heat shrinking | |
| Identification purpose | Protective earth conductors | |
| Application | Earth conductor identification, additional electrical insulation and cable protection | |
| Product category | Cable Management and Heat Shrink Sleeving | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex ECHS2127EARTH(GRN/YEL) heat shrink tubing used for?
The Partex ECHS2127EARTH(GRN/YEL) is designed primarily for protective earth conductor identification, providing green/yellow sleeving for compatible earthing conductors and electrical connections in control panels, distribution equipment and industrial wiring installations.
What does the 2:1 shrink ratio mean?
A 2:1 shrink ratio means the tubing can reduce to approximately half its original diameter when heated without an obstruction. The ECHS2127EARTH(GRN/YEL) has a nominal supplied diameter of 12.7 mm and a nominal recovered diameter of 6.3 mm.
How much heat shrink tubing is supplied in one pack?
The Partex ECHS2127EARTH(GRN/YEL) is supplied in a 50 m pack, providing tubing that can be cut to the required lengths for individual protective earth conductor identification, electrical installation and maintenance tasks.
Why is this heat shrink tubing green and yellow?
The green/yellow colour combination is used to identify protective earth conductors in electrical installations. This distinctive colouring helps electricians and maintenance engineers recognise protective earthing connections and should be reserved for the appropriate protective conductor identification applications.
Where can the Partex ECHS2127EARTH(GRN/YEL) tubing be installed?
This tubing is suitable for compatible protective earth conductors and wiring components used in electrical control panels, industrial machinery, automation equipment, distribution boards and protective earthing assemblies. It is positioned over the conductor before controlled heat is applied to shrink it into place.
Trusted by Electrical Installers and Industrial Panel Builders
Partex cable identification and management products support electrical contractors, automation engineers and control panel manufacturers in creating organised and maintainable wiring installations. The ECHS2127EARTH(GRN/YEL) 2:1 green/yellow heat shrink tubing provides a practical solution for protective earth conductor identification and cable protection, with a 50 m pack suitable for professional electrical installation, industrial panel building and maintenance work.
