Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Partex ECHS2127BROWN brown 2:1 heat shrink tubing with a 12.7 mm supplied internal diameter and 6.3 mm recovered internal diameter, supplied in a 50 m pack for electrical insulation, cable protection and colour-coded conductor identification.
£31.67
The Partex ECHS2127BROWN is a practical and versatile 2:1 brown heat shrink tubing designed for electrical insulation, cable protection and colour-coded conductor identification in industrial and commercial electrical installations. Part of the Partex ECHS heat shrink tubing range, this sleeving provides an effective solution for protecting electrical conductors, covering cable connections and achieving a neat, professional finish on wiring assemblies.
Featuring a nominal supplied internal diameter of 12.7 mm and a nominal fully recovered internal diameter of 6.3 mm, the ECHS2127BROWN offers an approximately 2:1 shrink ratio. When suitable heat is applied, the tubing contracts around appropriately sized cables, conductors and components, creating a close-fitting protective covering that helps reduce abrasion, mechanical wear and damage caused by routine handling.
The distinctive brown finish supports clear conductor identification and organised cable management. Brown is commonly associated with line conductor identification in UK and European electrical installations, making this sleeving useful for appropriate conductor marking applications. Supplied in a convenient 50 m pack, the ECHS2127BROWN is suitable for electrical contractors, control panel manufacturers, industrial maintenance engineers and OEM equipment builders requiring dependable heat shrink sleeving for cable preparation, electrical assembly and maintenance work.
Heat shrink tubing is widely used in electrical engineering, industrial automation and control panel manufacturing to provide an insulating and protective covering around cables, electrical connections and wiring assemblies. When heated using a suitable controlled heat source, the tubing contracts in diameter to fit around the underlying cable or component. This creates a neat protective sleeve that helps reduce exposure to abrasion, handling damage and mechanical wear.
The Partex ECHS2127BROWN 2:1 brown heat shrink tubing has a nominal internal diameter of 12.7 mm before shrinking and a nominal fully recovered diameter of 6.3 mm. These dimensions make it suitable for appropriately sized electrical cables, insulated joints and cable assemblies. The brown finish is particularly useful for conductor identification in electrical systems where brown denotes a line conductor, helping installers maintain consistent wiring identification in control panels, electrical distribution equipment and industrial machinery.
For dependable results, the tubing should have sufficient initial diameter to pass over the largest part of the assembly and an appropriate recovered diameter to achieve the required fit. Apply heat evenly using suitable equipment and avoid excessive temperatures that could damage the tubing or underlying insulation. In UK electrical installations, brown is used for line conductor identification, so colour selection should follow the applicable wiring requirements. Standard heat shrink tubing should not be assumed to provide a waterproof seal unless a suitable sealing construction is specified.
Tick the specs you need, then view products that match.
| Supply Format | 50 m | |
|---|---|---|
| Device Type | Heat-shrink tubing | |
| Material | Polyolefin | |
| Cable Diameter (mm) | 6.3–12.7 mm | |
| Internal Diameter Before Shrinking (mm) | 12.7 mm | |
| Shrink Ratio | 2:1 | |
| Colour | Brown | |
| Adhesive Lined | No | |
| Manufacturer | Partex | |
| Series | ECHS Heat Shrink Tubing | |
| Model | ECHS2127BROWN | |
| Product type | Heat shrink tubing | |
| Product category | Heat Shrink Sleeving and Cable Protection | |
| Nominal shrink ratio | 2:1 | |
| Nominal supplied internal diameter | 12.7 mm | |
| Nominal fully recovered internal diameter | 6.3 mm | |
| Colour | Brown | |
| Identification purpose | Colour-coded conductor identification, including appropriate line conductor marking | |
| Operating principle | Heat-activated diameter reduction | |
| Application | Electrical insulation, cable protection and conductor identification | |
| Installation method | Position over the component and apply controlled heat | |
| Format | Cut-to-length heat shrink tubing | |
| Pack length | 50 m | |
| Manufacturer SKU | ECHS2127BROWN | |
| HS Code | 39269097 |
The Partex ECHS2127BROWN is used for electrical insulation, cable protection, connection sleeving and colour-coded conductor identification. It is suitable for control panel wiring, industrial automation, electrical distribution equipment and cable assembly applications.
A 2:1 shrink ratio means the tubing can reduce to approximately half its original internal diameter when fully recovered under suitable heating conditions. The ECHS2127BROWN has a nominal supplied internal diameter of 12.7 mm and a nominal recovered internal diameter of 6.3 mm.
Brown heat shrink tubing provides a visible covering for electrical cables and conductors. Brown is commonly used for line conductor identification in UK and European electrical installations, making it suitable for conductor marking where this colour is required by the applicable wiring standards.
Cut the tubing to the required length, slide it over the cable or component and apply controlled heat evenly using a suitable heat gun. The tubing contracts around the component as it heats. Ensure the selected tubing dimensions are compatible with the assembly and avoid overheating the tubing or underlying cable insulation.
The Partex ECHS2127BROWN is supplied in a 50 m pack, providing a practical quantity for industrial wiring, electrical panel manufacturing, conductor identification, cable harness production and maintenance applications.
Partex cable identification and installation accessories provide practical solutions for electrical engineers, industrial maintenance teams and control panel manufacturers. The ECHS2127BROWN brown 2:1 heat shrink tubing combines convenient installation, clear conductor identification and practical cable protection for professional electrical wiring, connection sleeving and cable assembly applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.