SL5025D400R250 Partex 50 x 25mm Danger 400 Volts Polypropylene Label, roll of 250

SL5025D400R250 Partex 50 x 25mm Danger 400 Volts Polypropylene Label, roll of 250

Partex SL5025D400R250 Danger 400 Volts polypropylene electrical warning labels measuring 50 mm x 25 mm for identifying equipment and circuits presenting a 400 V electrical hazard, supplied in a roll of 250.

SKU: SL5025D400R250MPN: SL5025D400R250
Price
List Price £20.64 ex VAT
Your Price (ex VAT) Save 10%
£18.58 10% OFF
You save £2.06 per pack Price per pack of 250
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £18.58
Trade pricing is personalised to your account

Manufacturer Lead Time

£18.58

Why Choose the Partex SL5025D400R250 Danger 400 Volts Polypropylene Labels?

The Partex SL5025D400R250 is a roll of 250 Danger 400 Volts polypropylene warning labels, each measuring 50 mm × 25 mm. Designed for electrical hazard identification, these labels provide a clear visual warning of the presence of 400-volt electrical equipment or circuits, helping personnel recognise potentially dangerous electrical supplies before inspection, maintenance or operation.

As part of the Partex electrical safety and voltage warning label range, the SL5025D400R250 provides a practical identification solution for electricians, electrical contractors, control panel manufacturers and industrial maintenance teams. The Danger 400 Volts warning helps communicate important electrical safety information on distribution equipment, control panels, machinery and other suitable enclosures where 400 V supplies are present.

Manufactured from polypropylene, these warning labels offer a practical solution for electrical equipment identification in commercial and industrial environments. Their compact 50 mm × 25 mm dimensions provide a convenient format for positioning voltage warnings on suitable equipment surfaces, while the roll of 250 labels offers an efficient supply for panel manufacturing, large electrical installations and scheduled maintenance programmes.

Key Advantages

  • Clear Danger 400 Volts warning helps identify electrical equipment and circuits presenting a 400 V electrical hazard.
  • 50 mm × 25 mm label dimensions provide a compact format for electrical safety identification.
  • Polypropylene construction offers a practical alternative to conventional paper warning labels.
  • Supports electrical hazard communication in industrial, commercial and maintenance environments.
  • Helps personnel recognise voltage-related risks before accessing electrical equipment.
  • Suitable for three-phase electrical installations, control panels, machinery and compatible electrical enclosures.
  • Convenient roll format supports efficient label handling during repetitive identification tasks.
  • Roll of 250 labels provides a useful bulk quantity for electrical contractors, panel builders and facilities maintenance teams.

Key Features

  • Partex SL5025D400R250 Danger 400 Volts warning labels.
  • 50 mm label width.
  • 25 mm label height.
  • Polypropylene label material.
  • Danger 400 Volts electrical hazard identification.
  • Compact rectangular warning label format.
  • Designed for identifying equipment and circuits associated with 400 V electrical supplies.
  • Suitable for three-phase distribution equipment, electrical control panels and industrial machinery.
  • Supports electrical safety procedures and equipment identification programmes.
  • Convenient roll presentation for repeated use during installation, assembly and maintenance.
  • Supplied as a roll of 250 labels.

Clear Identification of 400 Volt Electrical Hazards

Electrical warning labels are an important part of effective hazard communication around energised equipment and electrical installations. The Partex SL5025D400R250 Danger 400 Volts label provides a visible warning to help identify equipment and circuits associated with a 400 V electrical supply. This voltage is commonly encountered as the nominal line-to-line voltage in UK three-phase low-voltage distribution systems, making clear identification particularly relevant for industrial machinery, distribution boards and electrical control equipment.

The 50 mm × 25 mm polypropylene label provides a compact format for application to suitable electrical enclosures, control panels and equipment surfaces. Its roll presentation makes labels readily available during electrical installation, equipment assembly and scheduled maintenance activities. With 250 labels per roll, the SL5025D400R250 is particularly useful for panel builders, electrical contractors and facilities maintenance teams managing larger numbers of electrical assets.

A Danger 400 Volts warning label is a visual safety aid and does not replace safe isolation, lock-off procedures, verification of dead or other required electrical safety precautions. Labels should only be applied where the warning accurately reflects the electrical hazard and should remain clearly visible and legible. Equipment containing 400 V supplies may also contain other hazardous voltages, so the complete electrical installation must be assessed before work begins. The suitability of the label material, adhesive and warning format should be checked against the intended environment and applicable safety requirements.

Typical Applications

  • Identification of electrical equipment containing 400 V supplies.
  • Three-phase electrical distribution boards and associated enclosures.
  • Industrial electrical control panels and switchgear assemblies.
  • Electrical cabinets, machinery enclosures and equipment housings.
  • Industrial motors, motor control centres and automation equipment.
  • Commercial and industrial three-phase electrical installations.
  • Manufacturing facilities, production machinery and workshop equipment.
  • Electrical panel manufacturing and equipment assembly.
  • Facilities management and planned electrical maintenance.
  • Large-scale electrical installation, inspection and refurbishment projects requiring consistent voltage hazard identification.

Technical Specifications

Tick the specs you need, then view products that match.

Height (mm) 25 mm
Device Type Warning / safety sign
Application Safety / hazard signage
Media Format Roll
Material Polypropylene
Label / Marker Dimensions (mm) 50 × 25 mm
Width (mm) 50 mm
Voltage 400 V
Manufacturer Partex
Product range Electrical Safety and Warning Labels
Product code SL5025D400R250
Product type Electrical voltage hazard warning label
Warning designation Danger 400 Volts
Identified voltage 400 V
Label width 50 mm
Label height 25 mm
Label dimensions 50 mm × 25 mm
Material Polypropylene
Label shape Rectangular
Supply format Roll
Quantity per roll 250
Primary function Electrical voltage hazard identification
Warning text Danger 400 Volts
Intended use Electrical equipment and circuit warning identification
Typical application 400 V three-phase electrical equipment and installations
Application environments Industrial facilities, commercial premises, workshops and electrical installations
Product classification Electrical safety warning and voltage identification label
HS Code 39269097

Frequently Asked Questions

What are the Partex SL5025D400R250 Danger 400 Volts labels used for?

The Partex SL5025D400R250 labels are designed to identify electrical equipment and circuits presenting a 400 V electrical hazard. They provide a visible warning for personnel working with three-phase distribution equipment, electrical panels, industrial machinery and associated installations.

What size are the Partex SL5025D400R250 warning labels?

Each label measures 50 mm wide × 25 mm high, providing a compact rectangular format for displaying a Danger 400 Volts warning on suitable electrical equipment surfaces.

What material are the SL5025D400R250 labels manufactured from?

The labels are manufactured from polypropylene, a polymer material commonly used for electrical equipment identification and warning labels. Suitability for a particular surface, temperature or environmental condition should be checked before application.

How many Danger 400 Volts labels are supplied in one roll?

The Partex SL5025D400R250 is supplied as a roll of 250 Danger 400 Volts polypropylene labels, making it suitable for electricians, control panel builders and maintenance teams requiring a bulk quantity of voltage warning labels.

Are Danger 400 Volts labels suitable for three-phase electrical equipment?

Yes. Danger 400 Volts labels are suitable for identifying equipment containing a 400 V electrical supply, including many UK three-phase electrical installations. The warning must accurately reflect the equipment's electrical hazards, and appropriate isolation and safety procedures must still be followed before any work is undertaken.

Trusted by Electrical Installation Professionals

Partex electrical safety warning labels provide practical identification solutions for electricians, control panel builders, industrial engineers and maintenance professionals. The SL5025D400R250 combines a clear Danger 400 Volts warning with a compact 50 mm × 25 mm polypropylene label format, supplied in a convenient roll of 250 to support consistent electrical hazard identification across three-phase equipment, control panels and industrial installations.