R281B/1 Partex Self Adhesive Cable Clips, 28 x 28mm – Bundle Dia. 12mm – 18mm, Black, pack 100

Why Choose the Partex R281B/1 Self Adhesive Cable Clips?

The Partex R281B/1 Self Adhesive Cable Clips provide a convenient and effective solution for organising, securing and routing cables in electrical installations, industrial control panels, machinery and equipment enclosures. Featuring a 28 mm × 28 mm self-adhesive mounting base and designed for cable bundle diameters from 12 mm to 18 mm, these black cable clips help create neat, structured wiring layouts without the need to drill individual mounting holes into suitable surfaces.

Supplied in a practical pack of 100 cable clips, the Partex R281B/1 is an excellent choice for electrical contractors, industrial panel builders, maintenance engineers and equipment manufacturers who require multiple cable fixing points. The adhesive backing allows each clip to be positioned directly onto a compatible mounting surface, simplifying installation and helping reduce the preparation associated with conventional screw-mounted cable supports.

The black finish provides a professional appearance that works particularly well with dark equipment housings, electrical cabinets and industrial installations. With a compact 28 mm square base and a specified 12–18 mm cable bundle capacity, the Partex R281B/1 black self adhesive cable clip is a practical accessory for maintaining orderly cable routes, reducing loose wiring and supporting efficient electrical installation and maintenance.

Key Advantages

• Self-adhesive mounting: Enables convenient installation on suitable surfaces without drilling individual fixing holes.
• 28 mm × 28 mm base: Provides a compact square mounting footprint for planned cable routes.
• 12–18 mm bundle diameter: Designed to accommodate compatible cable bundles within the specified size range.
• Black colour: Offers a discreet, professional appearance for industrial and electrical equipment.
• Pack of 100: Convenient for panel-building projects, equipment assembly and maintenance stockholding.
• Improved cable organisation: Helps maintain neat and consistent cable routing.
• Reduced installation preparation: Adhesive mounting avoids the need for separate drilled fixing points where suitable.
• Versatile applications: Useful for electrical control panels, machinery wiring and general equipment cable management.
• Defined bundle capacity: Makes it easier to select a clip for cables measuring 12–18 mm in overall diameter.
• Professional installation finish: Helps keep compatible cable bundles positioned along designated routes.

Key Features

• Manufacturer: Partex.
• Manufacturer part number: R281B/1.
• Product type: Self adhesive cable clip.
• Mounting base dimensions: 28 mm × 28 mm.
• Minimum specified bundle diameter: 12 mm.
• Maximum specified bundle diameter: 18 mm.
• Bundle diameter range: 12–18 mm.
• Colour: Black.
• Mounting method: Self-adhesive backing.
• Pack quantity: 100 pieces.
• Designed for organising and positioning compatible cable bundles.
• Suitable for installation on appropriately prepared adhesive-compatible surfaces.
• Useful for electrical panel building and industrial equipment wiring.
• Compact square mounting footprint.
• Practical for new installations, cable routing improvements and maintenance work.

Convenient Self Adhesive Cable Management Without Drilling

The Partex R281B/1 self adhesive cable clip offers a straightforward method of securing cable bundles to suitable surfaces. In electrical installations, control panels and machinery, drilling individual mounting holes can increase installation time and may not be appropriate for every enclosure or equipment surface. Self-adhesive cable clips provide an alternative where the surface and operating conditions permit adhesive fixing.

Each clip features a 28 mm × 28 mm adhesive mounting base, allowing installers to position cable fixing points along a planned route. The square footprint provides a defined contact area for the adhesive while remaining compact enough for many equipment and enclosure applications.

The specified 12–18 mm cable bundle diameter range makes the R281B/1 suitable for appropriately sized cable groups. Selecting the correct clip size is important for maintaining orderly wiring without unnecessarily compressing the cable insulation or allowing excessive movement.

By keeping cables positioned along designated routes, adhesive cable clips can help improve the overall organisation of an electrical installation. Neater cable routing can also make equipment inspection, identification and routine maintenance more straightforward, particularly where multiple cables are installed within a limited space.

Adhesive performance depends on several factors, including surface material, cleanliness, temperature, environmental exposure and the mechanical load applied by the cable bundle. Installers should verify that adhesive mounting is suitable for the intended application and follow the manufacturer's installation recommendations.

Designed for Cable Bundles from 12 mm to 18 mm

The Partex R281B/1 is designed for cable bundles with an overall diameter between 12 mm and 18 mm. This makes it a useful cable management accessory for installations involving compatible groups of electrical cables, control wiring and other equipment cabling.

The specified bundle diameter refers to the outside diameter of the complete cable or cable group being secured. It does not refer to the electrical conductor cross-sectional area. For example, a cable described by its conductor size must still be checked for its actual outside diameter before selecting a suitable clip.

When several cables are grouped together, their combined outside dimensions should be measured or assessed. The bundle should fit within the clip's specified capacity without excessive compression, distortion or unwanted pressure on the cable insulation.

Where cable routes include bends, changes of direction or areas of movement, additional consideration should be given to the spacing and positioning of the clips. Cables should not be forced into excessively tight bends or held under unnecessary tension.

Although adhesive cable clips are useful for organising wiring, they should not automatically be treated as substitutes for purpose-designed strain relief, heavy-duty mechanical cable supports or safety-critical cable restraints. The complete installation should be assessed according to the cable load and operating environment.

Choosing the Correct Black Self Adhesive Cable Clip

When selecting self adhesive cable clips, three important factors are the cable bundle diameter, mounting base dimensions and installation environment. The Partex R281B/1 combines a 28 mm square base with a 12–18 mm bundle diameter range, making it suitable for applications requiring this particular combination of mounting footprint and cable capacity.

Different cable clip sizes are intended for different bundle diameters. For example, the Partex R251N/1 features a 25 mm × 25 mm base and is specified for 8–13 mm cable bundles, while the Partex R281B/1 has a larger 28 mm × 28 mm base and accommodates 12–18 mm bundles. The correct product should be selected according to the actual cable dimensions and mounting requirements.

The mounting surface must also be considered. Adhesive cable clips are most appropriate where the adhesive can establish a reliable bond with a compatible surface. Contamination, unsuitable coatings, rough textures or environmental conditions may reduce the effectiveness of the fixing.

For installations exposed to vibration, movement, heat, moisture or significant cable loading, confirm that adhesive mounting is appropriate. Where necessary, supplementary mechanical cable supports or alternative fixing methods should be considered.

The black finish makes the R281B/1 a practical option for installations where a dark cable management accessory is preferred. The pack of 100 is especially useful for projects involving multiple cable routing points or repeated equipment assembly.

Installation Guidance for the Partex R281B/1

Before installation, confirm that the cable or cable bundle has an overall diameter between 12 mm and 18 mm. Plan the cable route and determine the required number and spacing of fixing points, taking account of the cable's weight, flexibility and intended position.

The mounting surface should be thoroughly cleaned and dried before applying the clip. Dust, grease, oil, moisture and loose surface material can interfere with adhesive bonding. Any cleaning products used should be compatible with the surface and the adhesive.

Once the mounting area has been prepared, remove the protective backing from the adhesive and position the 28 mm × 28 mm cable clip in the required location. Apply firm, even pressure in accordance with the manufacturer's instructions to establish contact between the adhesive and mounting surface.

Where the adhesive requires a bonding or curing period, allow the recommended time before applying the full cable load. Installation temperature and bonding conditions should be confirmed from the manufacturer's technical information rather than assumed.

After the clip has been mounted, position the compatible cable bundle within the clip as intended. Check that the cables are not pinched, overstressed or forced into an unsuitable bend. Additional support may be required for heavy cables or routes subject to mechanical movement.

For electrical equipment installations, inspect the finished cable routing to ensure that it does not obstruct terminals, moving components, ventilation openings or maintenance access. The clips should only be used in environments compatible with their adhesive and material specifications.

Typical Applications

• Electrical control panels: Organising compatible cable bundles within suitable panel assemblies.
• Industrial machinery: Routing electrical wiring along compatible equipment surfaces.
• Electrical cabinets: Maintaining neat and accessible internal cable routes.
• Automation systems: Managing wiring in control and monitoring equipment.
• OEM equipment manufacture: Providing repeatable cable management fixing points during assembly.
• Power supply equipment: Organising compatible wiring around suitable components and enclosures.
• Commercial electrical installations: Supporting orderly cable management where adhesive fixing is appropriate.
• Maintenance and refurbishment: Improving existing cable routes during equipment servicing.
• Workshop cable management: Securing compatible cables to suitable mounting surfaces.
• General equipment wiring: Providing convenient adhesive-mounted cable positioning points.