R251N/1 Partex Self Adhesive Cable Clips, 25 x 25mm – Bundle Dia. 8mm – 13mm, Natural, pack 100

Why Choose the Partex R251N/1 Self Adhesive Cable Clips?

The Partex R251N/1 Self Adhesive Cable Clips provide a practical solution for organising, securing and routing cables in electrical installations, control panels, equipment enclosures and general cable management applications. Featuring a 25 mm × 25 mm adhesive mounting base and designed for cable bundles measuring 8 mm to 13 mm in diameter, these natural-coloured cable clips help maintain neat, organised wiring without requiring a drilled fixing hole for every mounting position.

Supplied in a convenient pack of 100 cable clips, the Partex R251N/1 is particularly useful for electrical contractors, industrial panel builders, maintenance engineers, equipment manufacturers and installation teams handling multiple cable routing points. The self-adhesive backing allows the clips to be positioned on suitable clean, dry and compatible surfaces, helping simplify cable organisation in areas where mechanical fixings are unnecessary or unsuitable.

The natural finish offers a neutral appearance that integrates neatly with electrical cabinets, machinery and other equipment. With a compact 25 mm square footprint and an 8–13 mm bundle diameter range, the Partex R251N/1 adhesive cable clip is designed for applications requiring controlled cable positioning, improved wiring organisation and straightforward installation.

Key Advantages

• Self-adhesive mounting: Allows installation on suitable surfaces without drilling mounting holes.
• 25 mm × 25 mm base: Provides a compact, defined mounting footprint.
• 8–13 mm cable bundle capacity: Designed to accommodate compatible cable bundles within the specified diameter range.
• Natural colour: Offers a neutral appearance for electrical cabinets, machinery and equipment installations.
• Pack of 100: Convenient for larger cable management projects, panel assembly and maintenance stock.
• Neater cable routing: Helps keep compatible cables and bundles positioned along planned routes.
• Reduced installation preparation: Adhesive mounting can eliminate the need for individual drilled fixing points.
• Versatile applications: Suitable for consideration in electrical, industrial and general equipment wiring installations.
• Compact design: Useful where mounting space is limited and a 25 mm square base can be accommodated.
• Professional cable organisation: Supports tidy installations and easier identification of cable routes.

Key Features

• Manufacturer: Partex.
• Product reference: R251N/1.
• Product type: Self adhesive cable clip.
• Mounting base dimensions: 25 mm × 25 mm.
• Minimum specified bundle diameter: 8 mm.
• Maximum specified bundle diameter: 13 mm.
• Bundle diameter range: 8–13 mm.
• Colour: Natural.
• Mounting method: Self-adhesive backing.
• Pack quantity: 100 clips.
• Designed for securing and organising compatible cable bundles.
• Suitable for mounting on appropriately prepared and compatible surfaces.
• Supports structured cable routing in electrical and equipment installations.
• Compact mounting footprint for organised wiring layouts.
• Practical for new installations, cable management improvements and maintenance work.

Convenient Self Adhesive Cable Management Without Drilling

The Partex R251N/1 self adhesive cable clip is designed to make cable management more straightforward by providing a fixing point that can be attached directly to a suitable surface. In many electrical and equipment installations, drilling holes for individual cable clips can be inconvenient, time-consuming or undesirable. A self-adhesive fixing provides an alternative where the surface and application are appropriate.

Each clip features a 25 mm × 25 mm mounting base, offering a compact footprint for positioning along a planned cable route. This makes the clips useful for arranging cables inside suitable electrical enclosures, alongside equipment panels or across other compatible mounting surfaces.

The specified 8–13 mm bundle diameter range helps installers select the correct clip for the cables being managed. Matching the bundle size to the clip is important because an incorrectly sized fixing may not provide the intended cable positioning or retention.

Self-adhesive cable clips can also help maintain an orderly installation by keeping wiring away from areas where it may interfere with access, servicing or equipment operation. The clips should be positioned so that the cables are supported appropriately and are not subjected to excessive tension, sharp bends or unwanted mechanical stress.

Adhesive fixing performance depends on factors such as the mounting surface, surface preparation, installation temperature, environmental exposure and the weight or forces applied by the cables. For demanding applications, the suitability of the adhesive fixing should be confirmed against the manufacturer's specifications.

Designed for Cable Bundles from 8 mm to 13 mm

Choosing the correct cable clip size is an important part of achieving an organised and secure installation. The Partex R251N/1 is specified for cable bundle diameters between 8 mm and 13 mm, making it suitable for appropriately sized groups of electrical cables and other compatible wiring arrangements.

The bundle diameter refers to the overall outside diameter of the cables or cable group being secured, rather than the conductor cross-sectional area. For example, a cable's electrical conductor size does not directly establish whether it will fit an 8–13 mm cable clip. The actual outside diameter of the cable or assembled bundle should be measured before selecting the fixing.

Where multiple cables are grouped together, their combined outside dimensions should be considered. The bundle should fit the clip without excessive compression or distortion of the cable insulation.

Installers should also consider cable movement, flexibility and routing requirements. Cable clips are intended to help position and organise wiring; they should not be relied upon as substitutes for purpose-designed strain relief, mechanical cable supports or safety-critical restraints where those are required.

Installation Guidance for the Partex R251N/1

For effective installation, begin by identifying the intended cable route and checking that the 8–13 mm bundle diameter range is suitable for the cables being secured. Plan the positions of the clips so that the wiring can follow a neat route without excessive bending or tension.

The mounting surface should be clean, dry and free from dust, grease, oil and loose material. Any cleaning products used should be compatible with the surface and adhesive. Rough, porous, contaminated or otherwise unsuitable surfaces may reduce adhesive performance.

Once the surface is prepared, remove the adhesive backing and position the 25 mm × 25 mm cable clip in the required location. Apply firm, even pressure in accordance with the manufacturer's installation instructions to establish contact between the adhesive and mounting surface.

Allow any recommended adhesive bonding period before applying the full cable load. The appropriate waiting period and installation temperature should be confirmed from the manufacturer's technical information rather than assumed.

After the clip has been installed, position the cable or bundle within the clip as intended. Check that the wiring is not pinched, overstressed or forced into an unsuitable bend. Additional cable supports may be required where the cables are heavy, subject to movement or exposed to mechanical forces.

For electrical installations, the finished cable routing should be inspected to ensure that it does not obstruct access to terminals, moving components, ventilation openings or maintenance areas. The clips should only be used in environments and applications compatible with their specified adhesive and material properties.

Choosing the Correct Self Adhesive Cable Clip

When selecting self adhesive cable clips, three important considerations are the cable bundle diameter, mounting base size and installation environment. The Partex R251N/1 provides a 25 mm square mounting base and is intended for bundles measuring 8–13 mm in diameter.

Before ordering, confirm that the complete cable bundle falls within this range. A clip that is too small may compress or damage the cables, while a clip that is too large may not position the bundle as intended.

The mounting surface should also be considered. Self-adhesive cable clips are most appropriate where the adhesive can bond effectively to a compatible surface. Surface coatings, contamination, texture and environmental conditions may affect the reliability of the fixing.

For installations exposed to significant vibration, movement, heat, moisture or sustained cable loading, check whether adhesive mounting is appropriate. Depending on the application, additional mechanical fixing or an alternative cable support method may be required.

The natural-coloured finish is a useful option where a neutral cable management accessory is preferred. The pack of 100 is especially convenient when multiple fixing points are required throughout a panel, cabinet or equipment installation.

Typical Applications

• Electrical control panels: Organising compatible cable bundles within suitable panel assemblies.
• Industrial machinery: Routing wiring along compatible equipment surfaces.
• Electrical cabinets: Keeping internal wiring neat and appropriately positioned.
• Automation equipment: Managing cable routes in control and monitoring installations.
• OEM equipment manufacture: Providing repeatable cable management fixing points during assembly.
• Power supply installations: Organising compatible wiring around suitable equipment.
• Commercial electrical installations: Supporting tidy cable management in appropriate locations.
• Maintenance and refurbishment: Reorganising cable routes during equipment servicing.
• Workshop cable management: Securing compatible wiring to suitable surfaces.
• General equipment wiring: Providing convenient adhesive-mounted cable positioning points.