Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HL200-RED Partex Hook & Loop Ties, 200mm x 12.5mm, Red, pack 100
Partex HL200-RED reusable red hook and loop cable ties measuring 200 mm x 12.5 mm, supplied in a pack of 100 for adjustable cable bundling, colour-coded cable organisation, network installations, communications wiring and electrical cable management.
£23.79
Why Choose the Partex HL200-RED Red Hook & Loop Cable Ties?
The Partex HL200-RED is a versatile red hook and loop cable tie designed for reusable cable bundling, adjustable wire management and convenient cable organisation. Measuring 200 mm in length and 12.5 mm in width, these flexible fastening straps provide a practical alternative to conventional plastic cable ties for installations where cables may need to be accessed, rearranged or added after initial installation.
Featuring a reusable hook and loop fastening system, the Partex HL200-RED allows cable bundles to be secured, released and repositioned without cutting the fastening. This makes these straps particularly useful for organising data cables, communications wiring, electrical leads and equipment connections where frequent adjustments, straightforward maintenance and careful cable handling are important.
Supplied in a convenient pack of 100 red hook and loop cable ties, the HL200-RED is suitable for electricians, network installers, IT technicians, control panel builders and maintenance engineers. Its distinctive red colour also supports user-defined colour-coded cable management systems, helping installers visually distinguish selected wiring groups, equipment connections or cable routes.
Key Advantages
- Reusable hook and loop fastening allows cable bundles to be opened, adjusted and secured again.
- 200 mm length and 12.5 mm width provide a practical fastening format for electrical and data cable organisation.
- Red colour supports visual identification and user-defined colour-coded cable management.
- Flexible fastening strap offers adjustable cable retention without the rigid locking mechanism of a conventional nylon cable tie.
- No cutting required for release, making routine cable additions and maintenance more convenient.
- Pack of 100 provides a useful quantity for professional installation, equipment assembly and maintenance.
- Suitable for data cables, communications wiring, electrical leads and general cable organisation.
- Helps reduce unnecessary replacement of single-use cable ties during suitable maintenance tasks.
- Convenient for temporary cable arrangements and installations where wiring configurations may change.
Key Features
- Partex HL200-RED hook and loop cable ties.
- 200 mm nominal length for versatile cable bundling applications.
- 12.5 mm nominal width for a broad, flexible fastening strap.
- Red finish for convenient visual identification.
- Hook and loop fastening mechanism for adjustable cable retention.
- Reusable design for repeated opening and closing when the fastening remains in good condition.
- Suitable for cable groups requiring periodic access or repositioning.
- 100 individual hook and loop ties per pack.
- Useful for network installations, communications equipment and electrical cable management.
- Can be applied and released by hand without specialist fastening tools.
Reusable Hook & Loop Fastening for Flexible Cable Management
Electrical, networking and communications installations often require cable bundles to be adjusted during commissioning, maintenance or equipment upgrades. Conventional non-releasable plastic cable ties generally need to be cut before cables can be added or removed. The Partex HL200-RED offers a convenient alternative through its reusable hook and loop fastening system, allowing technicians to open and adjust cable bundles without cutting the strap.
This adjustable design is particularly useful in network cabinets, communications installations, equipment enclosures and workstations where cable arrangements may change over time. Installers can secure wiring during initial assembly and subsequently release the fastening to add, remove or reroute cables as required.
Hook and loop cable ties can also be a practical choice for cables that should not be tightly compressed. Their adjustable fastening allows installers to secure bundles without unnecessary pressure, although cable manufacturer recommendations for bend radius, bundling and mechanical handling should always be followed.
Red Hook & Loop Ties for Colour-Coded Cable Identification
The distinctive red finish of the Partex HL200-RED makes these hook and loop ties particularly useful for installations employing visual cable identification. Different colours can be assigned to particular equipment groups, wiring routes, network connections or maintenance categories, helping technicians recognise selected cable bundles more easily.
In structured cabling environments, red hook and loop cable ties can form part of a user-defined colour-coding system for distinguishing specific network connections, equipment assemblies or cable groups. This can support clearer cable organisation in network racks, communications cabinets, equipment rooms and industrial installations.
The red colour does not automatically indicate a particular electrical function, voltage classification, fire alarm circuit or other standardised designation. Any colour identification scheme should be documented and applied consistently according to the requirements of the installation.
Easy Installation, Adjustment and Reuse
Installing the Partex HL200-RED is straightforward. Position the hook and loop strap around the selected cable bundle, wrap it to the required fit and press the fastening surfaces together to secure the cables. The closure can then be opened and adjusted by hand whenever cable access or repositioning is required.
The 200 mm length provides a practical fastening reach for compatible cable groups, while the 12.5 mm width offers a broad contact area for adjustable bundling. For data and communications cables, avoid overtightening and maintain the minimum bend radius and installation requirements specified by the cable manufacturer.
Before repeated reuse, inspect the hook and loop surfaces for wear, contamination or reduced fastening performance. Replace any strap that no longer secures the intended bundle adequately. For demanding environments involving heat, chemicals, moisture or prolonged sunlight, confirm the manufacturer's environmental suitability specifications before installation.
Typical Applications
- Structured cabling and network rack cable management.
- Data centre and server cabinet cable organisation.
- Ethernet and communications cable bundling.
- Electrical control panel wiring requiring adjustable fastening.
- Audio, visual and multimedia equipment cabling.
- Workstation and office cable organisation.
- Telecommunications equipment and patch panel installations.
- Temporary cable routing during installation and commissioning.
- Colour-coded cable grouping in equipment rooms and industrial facilities.
- Maintenance applications requiring regular cable access and repositioning.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour | Red | |
|---|---|---|
| Device Type | Hook & loop tie | |
| Length (mm) | 200 mm | |
| Width (mm) | 12.5 mm | |
| Material | Polyester/nylon (hook & loop) | |
| Manufacturer | Partex | |
| Series | HL Hook & Loop Cable Ties | |
| Model | HL200-RED | |
| Product type | Reusable hook and loop cable tie | |
| Fastening system | Hook and loop textile closure | |
| Colour | Red | |
| Nominal length | 200 mm | |
| Nominal width | 12.5 mm | |
| Fastening mechanism | Adjustable hook and loop closure | |
| Reusability | Reusable when the fastening remains undamaged and fit for purpose | |
| Pack quantity | 100 pieces | |
| Installation method | Manual wrapping, fastening and adjustment | |
| Primary function | Reusable cable bundling, fastening and wire organisation | |
| Typical applications | Data cabling, communications installations, electrical wiring, equipment assembly and cable management | |
| HS Code | 39269097 |
Frequently Asked Questions
What are the Partex HL200-RED hook and loop cable ties used for?
The Partex HL200-RED cable ties are designed for reusable cable bundling and organisation. They are particularly useful for data cabling, communications wiring, electrical equipment and installations where cable bundles may need to be opened or adjusted.
What size are the Partex HL200-RED hook and loop ties?
Each hook and loop cable tie measures 200 mm in nominal length and 12.5 mm in nominal width, providing a flexible fastening format for organising compatible cable bundles.
Can the Partex HL200-RED cable ties be reused?
Yes. The HL200-RED features a reusable hook and loop fastening system that can be opened, repositioned and secured again without cutting the strap. Reuse is appropriate while the fastening surfaces remain undamaged and capable of holding the intended cable bundle.
How many red hook and loop cable ties are included in a pack?
The Partex HL200-RED is supplied in a pack of 100 red hook and loop cable ties, suitable for electrical installations, network cabling, equipment assembly and maintenance work.
Can red hook and loop cable ties be used for colour-coded cable management?
Yes. The red colour can be used as part of a user-defined cable identification system to distinguish selected wiring groups, network connections or equipment assemblies. However, red does not automatically represent a standardised electrical or communications cable classification.
Trusted Cable Management Solutions for Electrical Professionals
Partex cable management products provide practical fastening and organisation solutions for electrical installation, communications infrastructure and equipment manufacturing. The HL200-RED combines reusable hook and loop fastening, versatile 200 mm × 12.5 mm dimensions, a distinctive red finish and convenient 100-piece packaging for adjustable cable bundling, colour-coded organisation and accessible wiring management.
