Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HFC710H-B Partex non-releasable nylon cable tie, 710mm x 9.0mm, Black, pack 100
Partex HFC710H-B is a black non-releasable nylon cable tie measuring 710 mm long and 9.0 mm wide, supplied in packs of 100 for secure cable bundling, large wiring harnesses and professional electrical and industrial cable management.
£39.52
Why Choose the Partex HFC710H-B Non-Releasable Nylon Cable Tie?
The Partex HFC710H-B is an extra-long, wide-strap non-releasable nylon cable tie designed for secure cable bundling, wiring organisation and professional electrical cable management. Measuring 710 mm in length and 9.0 mm in width, this black cable tie provides extended fastening reach for large cable bundles, substantial wiring harnesses and industrial equipment installations.
Part of the Partex HFC cable tie range, the HFC710H-B combines flexible nylon construction with a non-releasable, self-locking fastening mechanism. Its integrated locking head allows cables and conductors to be bundled without separate fastening components, making it a practical choice for electrical installations, machinery wiring and equipment assembly.
The generous 710 mm nominal length is particularly useful where shorter cable ties do not provide sufficient reach, while the 9.0 mm wide strap offers a broader fastening surface than narrower general-purpose cable ties. Supplied in a convenient pack of 100, the Partex HFC710H-B is suitable for electrical contractors, panel builders, automation engineers, equipment manufacturers and industrial maintenance professionals.
Key Advantages
- Extra-long 710 mm strap provides extended fastening reach for large cable bundles and wiring assemblies.
- 9.0 mm wide profile offers a broad fastening surface for demanding cable management applications.
- Non-releasable self-locking design provides secure fastening for cables and wiring harnesses.
- Nylon construction offers a lightweight and flexible cable fastening solution.
- Black colour provides a discreet, professional finish for electrical and industrial installations.
- Integrated locking head enables straightforward installation without separate fastening components.
- Pack of 100 cable ties provides a convenient quantity for production, installation and maintenance work.
- Helps organise substantial wiring assemblies and maintain consistent cable routing within machinery and electrical equipment.
- Reduces the need to join shorter cable ties when a longer single-piece fastening solution is required.
Key Features
- Partex HFC series nylon cable tie.
- 710 mm nominal cable tie length.
- 9.0 mm nominal strap width.
- Black colour for professional cable management.
- Non-releasable locking mechanism for secure cable bundling.
- Nylon material for flexible wire and cable fastening.
- 100 cable ties per pack.
- One-piece fastening design with an integrated self-locking head.
- Extra-long strap suitable for organising larger cable groups.
- Wide strap profile for applications requiring a broader fastening surface.
- Suitable for electrical installations, industrial machinery and wiring harness assemblies.
- Excess strap can be trimmed after tightening for a neat installation finish.
Extra-Long Cable Ties for Large Wiring Assemblies
The Partex HFC710H-B combines an extra-long 710 mm strap with a 9.0 mm width, making it suitable for applications where a longer, wider cable tie is preferred. Its extended length provides useful fastening reach for larger cable groups, wiring harnesses and equipment assemblies that may be difficult to secure using shorter cable ties.
This format is particularly relevant to industrial machinery, electrical equipment manufacturing, large wiring harness assemblies and cable management within industrial control systems. By grouping conductors into organised bundles, cable ties can help maintain consistent cable routes and support easier inspection and maintenance.
The wide strap provides a broader contact surface around the cable bundle than narrower fastening alternatives. However, the actual tensile strength, maximum bundle diameter and permitted mechanical loading depend on the product's specific design and material characteristics. These values should be confirmed against the manufacturer's technical documentation when critical to an installation.
Although the HFC710H-B has an extended strap length, it should not be used as a substitute for properly designed structural supports or load-bearing cable support systems. Where cables are subject to vibration, movement or significant mechanical loading, the complete fastening arrangement should be assessed for suitability.
Secure Installation and Professional Cable Bundling
To install the Partex HFC710H-B, position the cable tie around the intended cable bundle, feed the free end through the integrated locking head and tighten until the cables are securely held. The non-releasable locking mechanism is designed to maintain the fastening after tightening.
Its 710 mm length provides additional flexibility when securing large cable bundles or routing groups of conductors around suitable support points. Ensure that the tie is positioned correctly and that the fastening arrangement does not place unnecessary pressure on cable insulation.
Avoid excessive tightening that could damage cable insulation, compress sensitive conductors or restrict necessary cable movement. Where consistent fastening tension is required, use a suitable cable tie installation tool compatible with the 9.0 mm strap width.
After tightening, trim the excess strap using an appropriate cutting tool, preferably leaving a smooth finish without sharp protrusions. Because the cable tie is non-releasable, removal normally requires cutting the strap and installing a replacement.
For installations requiring UV resistance, elevated-temperature performance, chemical resistance or a particular flammability classification, verify that the HFC710H-B meets the relevant environmental requirements before use. Its black colour alone does not establish a specific UV resistance rating.
Typical Applications
- Large industrial electrical cable bundles and wiring assemblies.
- Extra-long cable fastening applications requiring extended strap reach.
- Industrial machinery wiring and cable routing.
- Electrical control panel and distribution equipment wiring.
- Industrial automation systems and PLC cabinets.
- Large wiring harnesses and equipment cable assemblies.
- OEM equipment manufacturing and production assembly.
- Electrical maintenance, repair and refurbishment work.
- Telecommunications and communications cable management.
- Workshop cable organisation and general-purpose fastening.
Technical Specifications
Tick the specs you need, then view products that match.
| Application | UV resistant | |
|---|---|---|
| Device Type | Standard cable tie | |
| Length (mm) | 710 mm | |
| Width (mm) | 9 mm | |
| Material | Nylon (PA 6.6) | |
| Colour | Black | |
| Manufacturer | Partex | |
| Series | HFC Cable Ties | |
| Model | HFC710H-B | |
| Product type | Non-releasable nylon cable tie | |
| Material | Nylon | |
| Nominal length | 710 mm | |
| Nominal strap width | 9.0 mm | |
| Colour | Black | |
| Locking type | Non-releasable, self-locking | |
| Fastening method | Manual insertion and tightening | |
| Pack quantity | 100 pieces | |
| Primary function | Cable bundling and wire management | |
| Additional functions | Large wiring harness organisation, cable grouping and cable routing | |
| Typical installation locations | Electrical control panels, industrial machinery, equipment cabinets and wiring assemblies | |
| Product category | Nylon Cable Ties and Cable Management Accessories | |
| HS Code | 39269097 |
Frequently Asked Questions
What is the Partex HFC710H-B cable tie used for?
The Partex HFC710H-B is used to bundle, secure and organise cables and wiring harnesses in electrical installations, industrial machinery, control panels and equipment assemblies. Its extra-long strap and wide profile make it particularly useful for larger cable groups.
What are the dimensions of the Partex HFC710H-B?
The cable tie measures 710 mm in nominal length and 9.0 mm in nominal width, providing an extra-long, wide-strap fastening format for professional cable management.
Is the Partex HFC710H-B reusable?
No. The HFC710H-B is a non-releasable nylon cable tie designed to remain locked after tightening. Removal normally requires cutting the tie and replacing it with a new one.
How many Partex HFC710H-B cable ties are supplied in a pack?
Each pack contains 100 black nylon cable ties, providing a practical quantity for electrical installation, industrial equipment assembly and maintenance applications.
What is the advantage of the 710 mm length?
The 710 mm nominal length provides additional fastening reach for larger cable bundles and wiring harnesses that cannot be conveniently secured using shorter cable ties. The maximum compatible bundle diameter should be confirmed against the product's usable fastening length.
What is the benefit of the 9.0 mm wide strap?
The 9.0 mm strap width provides a broader fastening surface than narrower cable ties, making it a practical choice for organising substantial cable bundles. The actual tensile strength and mechanical load capacity should be confirmed against the manufacturer's specifications.
Is the Partex HFC710H-B suitable for outdoor use?
The HFC710H-B is specified as a black nylon cable tie, but a particular UV resistance rating has not been established for this model. For installations involving prolonged sunlight exposure, confirm its environmental suitability or select a cable tie specifically rated for UV resistance.
How do you install the Partex HFC710H-B cable tie?
Wrap the cable tie around the intended cable bundle, insert the strap through the locking head and tighten to the required tension. Avoid overtightening or damaging cable insulation, and trim the excess strap using a suitable cutting tool. As the tie is non-releasable, it normally needs to be cut for removal.
Trusted Cable Management Solutions for Professional Installations
Partex supplies cable identification, marking and fastening accessories for professional electrical and industrial applications. The HFC710H-B black nylon cable tie combines an extra-long 710 mm strap, a broad 9.0 mm width and a non-releasable fastening design to support secure, organised cable management in industrial machinery, electrical equipment and large wiring harness assemblies.
