Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
HFC200L-RED Partex non-releasable nylon cable tie, 200mm x 2.5mm, Red, pack 100
Partex HFC200L-RED red non-releasable nylon cable ties measuring 200 mm in length and 2.5 mm in width, supplied in a pack of 100 for securing, bundling, colour coding and organising electrical cables and wiring assemblies.
£2.99
Why Choose the Partex HFC200L-RED Red Non-Releasable Nylon Cable Ties?
The Partex HFC200L-RED is a versatile red non-releasable nylon cable tie designed for securing, bundling, identifying and organising electrical cables, conductors and wiring assemblies. Measuring 200 mm in length and 2.5 mm in width, these cable ties provide a practical fastening solution for electrical installations, industrial control panels, automation equipment, machinery wiring and general cable management applications.
Manufactured from nylon, the HFC200L-RED features a non-releasable locking design that allows the tie to be tightened around a suitable cable bundle and retained in position. Its 200 mm length provides practical reach for securing compatible wiring groups, while the slim 2.5 mm width offers a narrow fastening profile for applications where a wider cable tie is unnecessary. The distinctive red colour also supports visual cable identification and colour-coded wiring organisation.
Supplied in a convenient pack of 100 cable ties, the Partex HFC200L-RED is suitable for electrical contractors, industrial panel builders, maintenance engineers and OEM equipment manufacturers requiring practical cable management accessories. Its combination of nylon construction, non-releasable fastening and red colour makes it a useful choice for electrical cable bundling, wiring organisation and installations where different cable groups need to be visually distinguished.
Key Advantages
- Non-releasable locking design provides secure single-use fastening for compatible cable bundles.
- 200 mm length offers practical reach for bundling and organising electrical cables.
- 2.5 mm width provides a slim fastening profile for smaller conductors and wiring assemblies.
- Red colour supports visual identification and colour-coded cable management systems.
- Nylon construction offers a practical material choice for general-purpose electrical cable fastening.
- Pack of 100 provides a convenient quantity for electrical installation, equipment assembly and maintenance.
- Helps maintain orderly cable routing and reduce unwanted movement within suitable electrical assemblies.
- Suitable for control panels, industrial machinery, automation systems and cable harness production.
Key Features
- Partex HFC non-releasable cable tie range.
- Product reference: HFC200L-RED.
- 200 mm nominal cable tie length.
- 2.5 mm nominal cable tie width.
- Red nylon construction for general cable management applications.
- Non-releasable locking mechanism for single-use cable fastening.
- 100 cable ties per pack.
- Red finish suitable for customer-defined cable identification and colour-coding arrangements.
- Slim fastening format for appropriately sized electrical cable bundles.
- Suitable for organising conductors and wiring within electrical enclosures.
- Practical for professional electrical installation, machinery assembly and maintenance applications.
Colour-Coded Cable Management for Industrial Electrical and Automation Systems
Effective cable management is essential for maintaining organised, accessible and serviceable electrical installations. Cable ties are widely used to group conductors, secure wiring and maintain consistent cable routing within industrial control panels, automation equipment, machinery assemblies and electrical enclosures. Correctly positioned cable ties can help reduce unwanted movement and maintain orderly wiring arrangements during installation, inspection and maintenance.
The Partex HFC200L-RED combines a 200 mm length with a slim 2.5 mm fastening profile, making it suitable for compatible cable bundles where additional length is required without a wider tie. Its nylon construction and non-releasable locking arrangement provide a straightforward fastening method for applications where the cable tie is intended to remain secured after installation.
The red finish offers an additional visual benefit for cable management systems. Where an installation uses an established colour-coding convention, red cable ties can help distinguish selected wiring groups, equipment connections or maintenance categories from other cables. However, cable tie colour does not establish an electrical safety classification or replace approved conductor identification, warning labels or circuit markings. Installers should follow the applicable wiring standards and site-specific identification procedures.
For electrical contractors, automation engineers and control panel manufacturers, the 100-piece pack provides a convenient supply for routine installation and maintenance work. Installers should avoid overtightening, protect cable insulation from damage and verify the applicable tensile strength, maximum bundle diameter, operating temperature range, UV resistance and environmental suitability against current Partex technical documentation before use in demanding applications.
Typical Applications
- Bundling electrical cables and conductors in suitable wiring assemblies.
- Colour-coded cable organisation within industrial control panels.
- Automation equipment and machinery wiring management.
- Cable harness manufacturing and assembly.
- Visual differentiation of cable groups in electrical enclosures.
- Electrical distribution equipment and switchgear wiring.
- OEM electrical equipment manufacturing and production.
- Industrial electrical maintenance and wiring refurbishment.
- General-purpose cable fastening in suitable electrical and industrial environments.
Technical Specifications
Tick the specs you need, then view products that match.
| Colour | Red | |
|---|---|---|
| Device Type | Standard cable tie | |
| Length (mm) | 200 mm | |
| Width (mm) | 2.5 mm | |
| Material | Nylon (PA 6.6) | |
| Manufacturer | Partex | |
| Series | HFC Cable Ties | |
| Model | HFC200L-RED | |
| Product type | Non-releasable cable tie | |
| Material | Nylon | |
| Nominal length | 200 mm | |
| Nominal width | 2.5 mm | |
| Colour | Red | |
| Locking type | Non-releasable | |
| Pack quantity | 100 pieces | |
| Primary function | Cable bundling, fastening and organisation | |
| Additional application | Visual cable identification and colour coding | |
| Application | Electrical wiring, cable harnesses and cable management | |
| Product category | Cable Ties and Cable Management Accessories | |
| HS Code | 39269097 |
Frequently Asked Questions
What are the Partex HFC200L-RED cable ties used for?
The Partex HFC200L-RED cable ties are used for securing, bundling and organising electrical cables, conductors and wiring harnesses in industrial control panels, electrical enclosures, automation equipment and machinery wiring. Their red colour also makes them useful for visual cable identification within established colour-coding systems.
What size are the Partex HFC200L-RED cable ties?
Each Partex HFC200L-RED cable tie measures 200 mm in length and 2.5 mm in width. This slim format is suitable for appropriately sized cable bundles, subject to the required bundle diameter, fastening load and installation conditions.
How many cable ties are included in one pack?
The Partex HFC200L-RED is supplied in a pack of 100 cable ties, providing a convenient quantity for electrical installation, cable harness assembly, industrial panel building and maintenance requirements.
Can the red Partex HFC200L-RED cable ties be used for cable identification?
Yes. The red colour can help distinguish selected cable bundles or wiring groups within a defined colour-coding system. However, the colour does not indicate a universal electrical function or safety classification and should not replace the conductor identification or circuit labelling required by applicable standards.
Are the Partex HFC200L-RED cable ties reusable or suitable for outdoor use?
The HFC200L-RED is non-releasable and intended for single-use fastening, so removal normally requires cutting and replacing the tie. Outdoor suitability cannot be determined from its red nylon construction alone; the manufacturer's UV-resistance rating, operating temperature range and environmental specifications should be checked before outdoor installation.
Trusted by Electrical Installers and Industrial Panel Builders
Partex cable identification and management products support electrical contractors, automation engineers, maintenance technicians and control panel manufacturers in creating organised and maintainable wiring installations. The HFC200L-RED red non-releasable nylon cable ties provide a practical solution for electrical cable bundling and visual wiring organisation, with a 200 mm × 2.5 mm format and 100-piece pack suitable for professional electrical installation, industrial equipment assembly and maintenance work.
